Reporting directly to the Plant Supervisor, the Control Room Operator ensures the efficient operation on major and minor equipment in areas of Receiving section, batching, Grinding and Mixing Operation; Pelleting and Fat Coating Operation and Bagging section. Produce high-quality Feeds in the most efficient and economical way and Contributes to the quality and quantity objective of the Plant.
A. Receiving section
- Coordinates with the warehouseman the sequence of raw materials to be poured to minimize material run out based on the production line up.
- Operates the computerized receiving system by choosing the designated silo/bin per materials to be poured.
- Ensures that no overflowing, intermixing, and clogging occurs during pouring and conveying of raw materials based on the bin/silo inventory report.
- Submit reports to Plant Supervisor regarding the raw materials received during the shift.
B. Batching, Grinding and Mixing operation
- Coordinates with Plant Supervisor regarding the type of product to be produced
- Check/review the formulation and make the necessary adjustment in coordination with QA personnel.
- In coordination with Micro technician, ensures that sequence of batching are being followed based on the production schedule.
- Operates the computerized batching system through weighing, grinding, mixing and conveying these to pelleting bins.
- Monitors weighing, grinding and mixing to ensure high batching efficiency.
- Ensures continuous batching operation in coordination with warehouseman regarding the availability of raw materials needed.
- Ensures accurate liquid addition required in the formulation.
- Provide and give feedback to maintenance personnel regarding any abnormalities and equipment condition.
- Prepares run ticket and accomplishes batching report.
C.Pelleting and Fats coating operation
- Ensures that all pelleting and fat coating system equipment such as pellet mill and tender blenders are all in good running condition.
- Checks all pelleting parameters and make a necessary adjustment based on product formulation.
- Coordinates with Maintenance personnel regarding the adequate supply of good quality steam and air pressure before and during operation.
- Operates computerized pelleting system according to the specified sequence.
- Monitors and ensures the feeds being produced conforms with the company standards in terms of quality such as pellet durability, shade/color, size, and nutritional value.
- Accomplishes pelleting report.
- Monitors pelleting equipment during operation such as;
- a. mash bins
- ensures that pelleting bins are clean and no meal hang up before change over
- b. pellet mill
- feeder variable frequency drive is functioning properly
- ensures that all temperature probe and plug sensors are clean
- ensures correct, steady supply of good quality steam
- ampere reading is steady and within the target which indicates a steady and even flow
- of discharge from the conditioner.
- knives/cutters are in the correct position and setting indicating a correct pellet length for a
- specific product.
- ensures correct roller adjustment/setting
- ensures correct injection of liquids in the conditioner, nozzles must be clean.
- c. crumbler
- ensures correct and proper adjustment for a specific product
- d. tender blender
- ensures correct injection of coconut oil-based from the formulation
D. Bagging section
- coordinates with Bagger regarding the sequence and feed type to be bagged including the bin assignment
- checks the accuracy of the bagging report to be submitted to the Plant Supervisor
E. Others
- prepares production report at the end of shift
- performs minor repair and maintenance including adjustment on mechanical components
- gives feedback in terms of automation error as well as automation improvement
- adheres to company policies, follows safety practices, and maintain good housekeeping in his area of responsibility
- calibration of coconut oil injection at tender blender
- calibration of batch mixers liquid injection such as molasses and coconut oil
- calibration of liquid injection at conditioner
- coordination with the outgoing plant operator regarding shift's operation
- ensures proper turnover to the incoming plant operator
- performs other duties that may be assigned from time to time
Education:
- Graduate of Engineering Course preferably Electrical or Mechanical
Experience:
- Preferably with experience in Feed Milling Operation
Other Requirements:
- Knowledge in PLC
- Computer literate
- Can work under pressure with minimum supervision