Pipe Fabricator/Welder

Fulton Hogan

Tauranga

On-site

NZD 65,000 - 90,000

Full time

7 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Brand-new Tauriko workshop
40‑hour week, Monday to Friday
Overtime opportunities
Training and welding qualifications
Close‑knit team environment

Job summary

Fulton Hogan in Tauriko is seeking an experienced Pipe Fabricator/Welder for our brand-new workshop. This hands-on role focuses on fabricating stainless process pipework from drawings, from material prep through to welding, QA and final inspection.

You will weld TIG and MIG on stainless and carbon steel, work to ASME Section IX 6G procedures, and plan your own workload while collaborating with the Workshop Supervisor. A practical mindset and attention to safety are essential.

Qualifications

  • Proven experience in pipe fabrication and welding.
  • Experience fabricating stainless process pipework.
  • Ability to interpret engineering drawings, pipe isometrics and WPS.

Responsibilities

  • Fabricate and weld stainless and carbon‑steel process pipework accurately from engineering drawings and pipe isometrics.
  • Independently measure, cut, prepare, fit and tack pipework, bends, tees, reducers and flanges before completing welding to the required WPS.
  • Maintain accurate flange alignment, bolt‑hole orientation, dimensions and tolerances while controlling heat input, weld shrinkage and distortion.
  • Produce high-quality TIG and MIG welds, including purged stainless pipework, with workmanship capable of consistently meeting inspection and NDT standards.
  • Carry out dimensional checks and self‑inspection throughout fabrication, maintaining material traceability, weld identification and QA documentation.
  • Undertake carbon‑steel MIG/FCAW work and a range of bespoke and one‑off fabrication as required.
  • Plan your assigned workload against agreed production priorities and deadlines, raising issues early where drawings, materials, quality or delivery requirements need clarification.
  • Work with a strong right‑first time and lean mindset, reducing waste, rework and unnecessary handling while maintaining safety and quality.
  • Maintain good housekeeping and safe working practices and take care of workshop equipment, tools and finished materials.

Skills

Pipe fabrication
Welding
TIG/MIG welding
ASME IX
Reading drawings & isometrics
Quality inspection

Education

Engineering fabrication trade qualification

Tools

TIG welding equipment
MIG welding equipment
WPS documentation

Job description

Mō te tūranga | About the role

Good Work starts in the workshop. We’re looking for an experienced Pipe Fabricator/Welder to join our new fabrication workshop in Tauriko.

This is a hands-on, predominantly workshop-based role for someone who is confident fabricating stainless process pipework from drawings and pipe isometrics, from initial material preparation and fit-up through to welding, dimensional checking and final QA.

You’ll work with stainless and carbon steel across a variety of process piping and bespoke fabrication work. Pipework can range from approximately 2” through to 30”, across Schedule 10, 40 and 80, including flanged, socket-weld and threaded systems.

We’re looking for someone who can produce high-quality TIG and MIG work, including purged stainless pipework, and who has the practical welding ability required to work to ASME Section IX-qualified procedures.

This is not a supervisory position. You’ll be on the tools and working under the direction of the Workshop Supervisor, while being trusted to plan and manage your own assigned workload, solve fabrication problems and raise questions early when something doesn’t look right.

You’ll be joining us at an exciting stage. The Tauriko workshop is brand new, equipped with new fabrication and welding equipment, and still developing its capability. You’ll have the opportunity to grow your skills, gain further welding qualifications and be part of a close-knit team helping build the workshop from the beginning.

Ngā tino kawenga mahi | Key role responsibilities
  • Fabricate and weld stainless and carbon‑steel process pipework accurately from engineering drawings and pipe isometrics.
  • Independently measure, cut, prepare, fit and tack pipework, bends, tees, reducers and flanges before completing welding to the required WPS.
  • Maintain accurate flange alignment, bolt‑hole orientation, dimensions and tolerances while controlling heat input, weld shrinkage and distortion.
  • Produce high-quality TIG and MIG welds, including purged stainless pipework, with workmanship capable of consistently meeting the required inspection and NDT standards.
  • Carry out dimensional checks and self‑inspection throughout fabrication, maintaining material traceability, weld identification and required QA documentation.
  • Undertake carbon‑steel MIG/FCAW work and a range of bespoke and one‑off fabrication as required.
  • Plan your assigned workload against agreed production priorities and deadlines, raising issues early where drawings, materials, quality or delivery requirements need clarification.
  • Work with a strong right‑first time and lean mindset, reducing waste, rework and unnecessary handling while maintaining safety and quality.
  • Maintain good housekeeping and safe working practices and take care of workshop equipment, tools and finished materials.
Kei te kimi mātou i tētahi e whai ana i ēnei pūkenga | We’re looking for someone with
  • Strong practical experience in pipe fabrication and welding, ideally with at least three years in a relevant fabrication environment.

  • Proven experience fabricating stainless process pipework, rather than welding pre‑fitted pipework alone.

  • Strong GTAW/TIG and GMAW/MIG capability, including stainless pipe requiring purge, together with experience in carbon‑steel MIG/FCAW.

  • The practical welding ability to successfully qualify to the required ASME Section IX 6G welding standard.

  • The ability to independently interpret engineering drawings, pipe isometrics, WPS documentation, work packs and inspection requirements.

  • A good understanding of stainless fabrication practices, including contamination prevention, heat and distortion control, purge quality and appropriate post‑weld treatment.

  • A practical problem‑solving mindset and the confidence to ask questions when something doesn’t look right rather than simply continuing.

  • The ability to organise your own assigned work, maintain productivity and communicate early when deadlines or quality may be affected.

  • A strong safety mindset and pride in producing accurate work right first time.

  • Your own established selection of everyday fabrication hand tools and measuring equipment.

  • A full driver’s licence.

A recognised engineering fabrication or welding trade qualification would be an advantage, but demonstrated ability, experience and workmanship are what matter most to us.

Shortlisted candidates should be comfortable completing a practical fabrication and welding assessment as part of the recruitment process.

He pai te mahi, he pai ngā painga | Good work, good benefits

Alongside Fulton Hogan’s wider employee benefits, this role offers something a little different for an experienced fabricator/welder:

  • Work from a brand‑new Tauriko fabrication workshop with new equipment.

  • Predominantly workshop‑based role, with the opportunity for occasional site work when required.

  • Varied work across stainless process piping, carbon steel and bespoke fabrication.

  • A stable 40‑hour Monday to Friday working week, normally 7:00am to 3:15pm.

  • Overtime opportunities when workload requires them, including Saturday work where necessary.

  • A practical and flexible approach to when additional weekday hours are worked, where production requirements allow.

  • Further training and welding qualification opportunities.

  • The opportunity to develop your skills as the workshop capability grows.

  • A close‑knit team where good ideas and practical improvements are encouraged.

  • The chance to join the workshop at the beginning of its development and be part of building what it becomes.

Ko wai mātou | About us

At Fulton Hogan, Good Work is more than what we deliver. It’s how we show up, how we back each other, and how we keep moving forward. Titles matter less than ideas, and the best people here are the ones who take pride in their work, speak up when it counts, and help the team get the job done properly.

We take the work seriously, not ourselves. That means a relaxed, human team culture day to day, and serious focus when safety, quality and delivery matter most.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Engineer Fitter / Welder
Engineer Fitter / Welder

Fulton Hogan • Christchurch

On-site
NZD 39,000 - 55,000
Medical insurance
Life insurance
KiwiSaver contributions
+3
Mechanical Foreman
Mechanical Foreman

Fulton Hogan • Christchurch

On-site
NZD 90,000 - 130,000
Company Vehicle
KiwiSaver employer contributions
Fuel discount card
+6
Pipe Fabricator/Welder – New Tauriko Workshop, Growth
Pipe Fabricator/Welder – New Tauriko Workshop, Growth

Fulton Hogan • Tauranga

On-site
NZD 65,000 - 90,000
Brand-new Tauriko workshop
40‑hour week, Monday to Friday
Overtime opportunities
+2
Mechanical Site Engineer
Mechanical Site Engineer

Fulton Hogan • Christchurch

On-site
NZD 90,000 - 130,000
Company Vehicle
KiwiSaver employer contributions
Fuel discount card
+6
Site Engineer
Site Engineer

Fulton Hogan • Auckland

On-site
NZD 85,000 - 120,000
Company vehicle and fuel card.
Medical and Life insurance after the资格
KiwiSaver employer contributions up to
+3
Group It Product Owner - Manufacturing & Supply Chain
Group It Product Owner - Manufacturing & Supply Chain

Fulton Hogan • Christchurch

On-site
NZD 110,000 - 160,000
Medical insurance
Life insurance
KiwiSaver employer contributions
+3
Project Manager
Project Manager

Fulton Hogan • Auckland

On-site
NZD 120,000 - 180,000
Company vehicle
Medical insurance
Life insurance
+4
Water Serviceperson Technician
Water Serviceperson Technician

Fulton Hogan • Whangarei

On-site
NZD 55,000 - 70,000
Medical insurance
Life insurance
KiwiSaver employer contributions
+3
Driver Operator
Driver Operator

Fulton Hogan • Auckland

On-site
NZD 50,000 - 80,000
Medical insurance
Life insurance
KiwiSaver employer contributions
+3
Civil Foreperson
Civil Foreperson

Fulton Hogan • Ashburton

On-site
NZD 90,000 - 120,000
Medical insurance
Life insurance
KiwiSaver employer contributions
+3
Top locations