Senior MEMS / Semiconductor Processing Specialist

The Fourth Law

Eindhoven

Hybride

EUR 80 000 - 120 000

Plein temps

Il y a 5 jours
Soyez parmi les premiers à postuler

Une candidature complète en une minute

Un CV et une lettre de motivation personnalisés, prêts à envoyer.

Passez les filtres ATS

Résumé du poste

The Fourth Law in Eindhoven leads a MEMS/semiconductor initiative to mass-produce thermal imaging sensors for Europe, Ukraine, and the US. The Senior MEMS / Semiconductor Processing Specialist will own the end-to-end cleanroom flow and release delicate suspended structures in a hands-on role.

The role sits in the Eindhoven R&D lab, reporting to the CTO, and collaborates with an international team to deliver robust, scalable MEMS processes and devices.

Qualifications

  • A degree in materials science, microelectronics, physics, or a related field, with hands-on cleanroom process experience.
  • Direct experience with photolithography, thin-film deposition (e.g. PECVD, sputtering) and wet/dry etching in a MEMS or semiconductor cleanroom.
  • Working knowledge of sacrificial-layer release processes and common MEMS failure modes, including stiction and stress-induced curling.
  • Comfortable developing new process flow from first principles, not just running an established recipe.
  • Fluent English, with the communication maturity to work with an international, partly Ukrainian team.

Responsabilités

  • Develop and document the end-to-end cleanroom process flow for microbolometer fabrication, from film deposition through structure release.
  • Own photolithography process steps: mask design coordination, exposure and develop parameters, and critical-dimension control.
  • Own thin-film deposition steps for sacrificial and structural layers, optimizing for uniformity, stress and compatibility with downstream process steps.
  • Develop and tune sacrificial-layer etch processes, both isotropic and anisotropic, to reliably release suspended microbolometer structures without stiction or membrane damage.
  • Troubleshoot yield and process excursions, working from wafer inspection and test data back to root cause.
  • Support equipment procurement, installation and commissioning in the new R&D lab, in coordination with the Technical Programme Manager.

Connaissances

Cleanroom
Photolithography
Thin-film deposition
Wet etching
Dry etching
Sacrificial-layer release
MEMS
Stiction
Stress curling
English fluency

Formation

Materials science
Microelectronics
Physics

Outils

PECVD
Sputtering

Description du poste

Senior MEMS / Semiconductor Processing Specialist

Project Foundation launched byThe Fourth Law and Odd Systems isasemiconductor initiative tomass-produce thermal imaging sensors for Ukraine, the rest ofEurope and the United States.

The initiative covers the development ofLWIR sensors and the deployment ofanetwork ofpartner-operated and in-house manufacturing facilities. Itwill create anew industrial base for defense and civilian needs and supply affordable sensors tomanufacturers ofdrones, vehicles, and robotics.

The first sensors under the initiative are expected asearly as2027.

The Fourth Law isaleading Ukrainian manufacturer ofautonomy technologies for drones. Our solutions are codified according toNATO standards and are currently utilized byover 50units ofthe Security and Defense Forces ofUkraine, aswell as20+drone manufacturers.

Odd Systems isadefense technology company specializing inthe development and manufacturing ofthermal imaging cameras. Itwas founded byagroup ofentrepreneurs, engineers, managers, and tech enthusiasts with prior experience atanumber ofinternational technology companies.

Purpose ofthe Role:

The MEMS/ Semiconductor Processing Specialist develops and owns the step-by-step cleanroom process flow that takes the microbolometer from deposited films toareleased, suspended structure. This isahands-on process engineering role covering photolithography, thin-film deposition, and sacrificial layer etching— both isotropic and anisotropic— with direct responsibility for releasing delicate suspended structures without damage orcollapse. The role works inthe Eindhoven R&D lab alongside the IC/MEMS Integration and Simulation Engineer and the wider technical cohort, and reports tothe CTO.

Office location:

Eindhoven, the Netherlands

Key Responsibilities:
  • Develop and document the end-to-end cleanroom process flow for microbolometer fabrication, from film deposition through structure release.
  • Own photolithography process steps: mask design coordination, exposure and develop parameters, and critical-dimension control.
  • Own thin-film deposition steps for sacrificial and structural layers, optimizing for uniformity, stress and compatibility with downstream process steps.
  • Develop and tune sacrificial-layer etch processes, both isotropic and anisotropic, toreliably release suspended microbolometer structures without stiction ormembrane damage.
  • Troubleshoot yield and process excursions, working from wafer inspection and test data back toroot cause.
  • Support equipment procurement, installation and commissioning inthe new R&Dlab, incoordination with the Technical Programme Manager.
Experience and skills weare looking for:
  • Adegree inmaterials science, microelectronics, physics, orarelated field, with hands-on cleanroom process experience.
  • Direct experience with photolithography, thin-film deposition (e.g. PECVD, sputtering) and wet/dry etching inaMEMS orsemiconductor cleanroom.
  • Working knowledge ofsacrificial-layer release processes and common MEMS failure modes, including stiction and stress-induced curling.
  • Comfortable developing new process flow from first principles, not just running anestablished recipe.
  • Fluent English, with the communication maturity towork with aninternational, partly Ukrainian team.
It’s aplus ifyou have:
  • Prior work specifically onmicrobolometers, uncooledIR detectors, orother suspended-membrane MEMS devices.
  • Experience commissioning cleanroom process equipment aspart ofanew lab orfab standup.
  • Familiarity with ISO Class 7or better cleanroom operating discipline.
  • Basedin, orwilling torelocateto, Eindhoven for the Odd Factory One R&Dlab.

Weare not just looking for employees, but for like-minded individuals who share our values and are ready tobuild the future ofUkrainian MilTech.

Obtenez votre examen gratuit et confidentiel de votre CV.

ou faites glisser et déposez votre fichier ici.

Similar jobs

Postes similaires à comparer

Senior MEMS / Semiconductor Processing Specialist
Senior MEMS / Semiconductor Processing Specialist

Odd Systems • Eindhoven

Hybride
EUR 70 000 - 100 000
Senior IC/MEMS Integration and Simulation Engineer
Senior IC/MEMS Integration and Simulation Engineer

Odd Systems • Eindhoven

Hybride
EUR 70 000 - 110 000
Senior IC/MEMS Integration and Simulation Engineer
Senior IC/MEMS Integration and Simulation Engineer

The Fourth Law • Eindhoven

Hybride
EUR 85 000 - 110 000
Characterization, Reliability and FPGA / Electronics Engineer
Characterization, Reliability and FPGA / Electronics Engineer

The Fourth Law • Eindhoven

Hybride
EUR 70 000 - 110 000
Characterization, Reliability and FPGA / Electronics Engineer
Characterization, Reliability and FPGA / Electronics Engineer

Odd Systems • Eindhoven

Hybride
EUR 60 000 - 85 000
Senior MEMS Processing Engineer - Cleanroom (Eindhoven)
Senior MEMS Processing Engineer - Cleanroom (Eindhoven)

The Fourth Law • Eindhoven

Hybride
EUR 80 000 - 120 000
Senior MEMS Process Engineer - Microbolometer Lab Eindhoven
Senior MEMS Process Engineer - Microbolometer Lab Eindhoven

Odd Systems • Eindhoven

Hybride
EUR 70 000 - 100 000
Technical Program Manager
Technical Program Manager

Odd Systems • Eindhoven

Sur place
EUR 90 000 - 130 000
Country Office Director (Eindhoven)
Country Office Director (Eindhoven)

The Fourth Law • Eindhoven

Hybride
EUR 70 000 - 100 000
Lab and Facility Operations Engineer – MEMS
Lab and Facility Operations Engineer – MEMS

Applied Materials, Inc. • Pays-Bas

À distance
EUR 64 000 - 88 000