Lead Electrical Engineer

MSR Green Energy Sdn Bhd; Kuala Lumpur; On-site; MYR 180,000 - 360,000; Full time

Job summary

MSR Green Energy Sdn Bhd seeks a Lead Electrical Engineer to lead electrical design, project execution, and grid interconnection for renewable energy projects. You will oversee LV/MV systems up to 33kV, perform power system studies, and ensure compliance with Malaysian regulations and IEC standards. Travel interstate may be required.

The candidate must hold PEPC and ST JEK 33kV, with 12+ years of relevant experience in detailed engineering, testing and commissioning. 132kV competency is a plus.

Qualifications

• Bachelor’s degree in Electrical Engineering is required.
• 12+ years of relevant electrical engineering experience in power systems/renewables.
• Strong knowledge of Malaysian electrical regulations and IEC/standards.
• Professional Engineer with Practising Certificate (PEPC) – Mandatory.
• ST Competent Electrical Engineer (JEK) certificate for at least 33kV – Mandatory.

Responsibilities

• Lead electrical design and review of LV/MV systems up to 33kV and assist higher voltage until permitted by certification.
• Develop and approve detailed engineering calculations, drawings and interconnection schedules.
• Perform power system studies (load flow, short circuit, protection coordination) using ETAP or equivalent.
• Coordinate with project teams, regulatory authorities, and stakeholders; travel interstate as required.
• Oversee installation, testing, FAT/SAT, and commissioning activities; ensure safety and quality.

Skills

Leadership

Communication

Team collaboration

Multi-tasking

Regulatory knowledge

Education

Bachelor’s degree in Electrical Engineering

Tools

ETAP

AutoCAD

Job description

Job Summary: Join the forefront of the RE movement with MSR Green Energy (“MSR-GE”), a pioneering company dedicated to powering the future with sustainable and clean energy solutions. We are seeking an experienced Lead Electrical Engineer with strong expertise in electrical engineering design, power systems and grid interconnection and a minimum of 12 years of relevant experience to join us. The successful candidate must be a Professional Engineer with Practising Certificate (“PEPC”) registered with the Board of Engineers Malaysia (“BEM”) and hold a valid Competent Electrical Engineer (“JEK”) competency certificate issued by Suruhanjaya Tenaga (“ST”) for at least 33kV. Candidates holding 132kV JEK competency or above will be highly preferred. The role will be HQ based but involves a willingness to travel interstate. This role is crucial in leading the electrical engineering and design of our RE projects, from initial design and planning through to construction, testing and commissioning, while ensuring compliance with technical, regulatory, safety, timeline and budget requirements.

Key Responsibilities:

Lead the engineering design and review of low and medium voltage electrical systems, including systems up to 33kV, and provide technical input and coordination for higher-voltage systems where applicable

Where the candidate holds higher ST competency, undertake the relevant Competent Electrical Engineer duties up to the voltage level permitted under his / her competency certification

Lead and participate effectively in the development, review and approval of detailed engineering calculations and drawings including Load Lists / Schedules, Single Line Diagrams, Schematic Diagrams, Cable Schedules and Cable Drum Schedules, Interconnection Schedules, Equipment Layouts, Cable Routing and Layout Drawings, Cable Trench / Tray Layout Drawings and Earthing / Lightning Protection System Layouts

Lead the electrical design and development of RE projects, substations and associated grid interconnection facilities

Prepare, review and approve electrical equipment specifications, datasheets, technical requisitions and vendor drawings

Perform and / or review power system studies including load flow, short circuit, protection coordination, relay settings, motor starting and other relevant electrical studies using ETAP or equivalent software

Participate in project meetings to provide design updates, technical guidance and engineering solutions

Collaborate with Project Managers, contractors, consultants, vendors and site engineers to ensure timely and accurate project execution

Liaise with TNB, Suruhanjaya Tenaga and other relevant authorities, utilities and stakeholders on electrical design, grid connection, regulatory and technical matters

Ensure compliance with local grid interconnection requirements, utility regulations, applicable Malaysian legislation, IEC standards and other relevant local and international standards

Conduct reviews of designs to ensure technical accuracy and adherence to project requirements

Lead and support the planning and execution of RE projects, ensuring compliance with all technical specifications and regulatory standards

Provide technical guidance to electrical engineers, designers and draughtspersons and ensure the timely completion and quality of engineering deliverables

Support and oversee the installation, testing, energisation and commissioning of electrical systems within the candidate’s areas of technical expertise and competency

Review method statements, testing procedures, commissioning procedures and other technical documentation

Witness Factory Acceptance Tests (“FATs”), Site Acceptance Tests (“SATs”), protection testing and other equipment testing where required

Help manage on-site electrical activities to ensure projects are completed on schedule, within budget and to the highest quality standards

Participate in thorough inspections and quality control assessments to ensure the safety and effectiveness of electrical installations

Resolve electrical design, construction, testing and commissioning issues throughout the project lifecycle

Contribute to a culture of safety by adhering to electrical safety protocols and best practices on-site

Assist in the allocation of electrical materials, labour and equipment to maximise productivity and minimise costs

Act as MSR-GE’s in-house PEPC and Competent Electrical Engineer for relevant projects and, where legally permissible and within the scope and voltage level of the candidate’s professional registration and ST competency certification, review, certify, sign and endorse engineering calculations, drawings, reports and submissions prepared for MSR-GE projects

Where permitted by the relevant regulatory authority, consent to being nominated and / or registered as MSR-GE’s Professional Engineer, PEPC and / or Competent Electrical Engineer and make his / her professional registrations and competency credentials available in support of MSR-GE’s CIDB, ST / ECOS and other applicable statutory registrations, licences, certifications, tenders, pre-qualifications and project requirements

Cooperate with and provide the necessary information, documentation, declarations, signatures and supporting records reasonably required for MSR-GE’s applications, registrations, renewals and regulatory submissions, subject always to applicable statutory and professional requirements

Undertake the above professional duties, including nomination, registration, professional review, certification, signing and endorsement, as part of the normal duties and agreed remuneration of the position. The agreed remuneration shall be inclusive of such duties and MSR-GE’s permitted use of the employee’s professional and competency credentials, and no separate professional, licence rental, nomination, registration, retainer, signing or endorsement fees shall be payable by MSR-GE to the employee

Any official statutory, application, registration or renewal fees payable to the relevant authorities in connection with the employee’s BEM, PEPC and ST JEK registrations and competency certifications required for the position, as well as MSR-GE’s corporate registrations or project submissions, shall be borne by MSR-GE. MSR-GE shall also bear the cost of any CDM or other professional training specifically required by MSR-GE for the employee to perform his / her duties, subject to prior approval by MSR-GE

About You:

To be successful in this role, you will possess:

A Bachelor’s degree in Electrical Engineering

Registration with BEM as a Professional Engineer with Practising Certificate (“PEPC”) – Mandatory

A valid ST Competent Electrical Engineer (“JEK”) competency certificate for at least 33kV – Mandatory

132kV JEK competency or above will be a significant advantage

A minimum of 12 years of relevant electrical engineering experience, preferably with substantial experience in detailed engineering, power generation, transmission, substations, utility infrastructure, renewable energy or major EPCC projects

Strong experience in low and medium voltage electrical design, protection, control and power distribution systems, with exposure to higher-voltage systems and substations highly advantageous

Experience with utility-scale solar PV, BESS, substations, power plants or TNB infrastructure will be highly advantageous

Strong knowledge of Malaysian electrical regulations, ST requirements, TNB requirements and applicable IEC and international standards

Demonstrable experience in electrical engineering design as well as construction, testing and commissioning

Experience in power system studies, including load flow, short circuit and protection coordination

Proficiency in ETAP or equivalent power system analysis software

Proficiency in AutoCAD and the ability to review detailed engineering drawings

Strong organisational and leadership skills, with the ability to handle multiple engineering deliverables simultaneously and meet tight deadlines

Excellent communication and interpersonal skills, with the ability to represent MSR-GE effectively in technical discussions with clients, consultants, utilities and regulatory authorities

A commitment to maintaining high engineering, safety and quality standards in all project activities

Willingness to travel interstate and attend project sites as required