Capital Equipment Repair Technician, APAC

Boston Scientific Medical Device (Malaysia) Sdn. Bhd.

Penang

On-site

MYR 52,000 - 86,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Boston Scientific Medical Device (Malaysia) Sdn. Bhd. in Penang is seeking a Capital Equipment Technician to perform complex technical activities ensuring medical capital equipment meets quality, performance, and reliability standards.

The role involves setup, testing, servicing, troubleshooting and documenting investigations in English. The successful candidate will work with minimal supervision, communicate technical issues clearly, and collaborate with cross-functional teams to support

Qualifications

  • Diploma or equivalent technical qualification in Electrical, Electronics, Mechatronics, Mechanical Engineering, or related discipline.
  • 4-5 years of relevant experience in equipment testing, troubleshooting, servicing, repair or maintenance.
  • Experience in the medical device industry is preferred; candidates from other technical industries are encouraged to apply.
  • Proficient in interpreting technical drawings, electrical schematics, wiring diagrams, and equipment specifications.
  • Ability to independently troubleshoot equipment failures, conduct investigations, identify root causes and implement corrective actions.

Responsibilities

  • Perform failure analysis, troubleshooting, and component-level diagnosis of electronic and electromechanical medical equipment using schematics, drawings, WIs, and diagnostic tools.
  • Repair, servicing, setup, inspection, testing, calibration, preventive maintenance, and verification of capital equipment per procedures.
  • Investigate test equipment failures and analyze results to identify root causes and improve reliability and turnaround time.
  • Support Manufacturing Engineering and R&D with testing of new products transfer including installation, setup, calibration, debugging, and development of repair procedures.
  • Support validation and technical investigations through equipment testing, data collection and documentation, collaborating with Engineering, Quality, Manufacturing, and other teams.
  • Provide cross-training and technical guidance to other technicians and stakeholders as required.
  • Explain testing of products during tours, inspections or audits.
  • Travel to other sites/vendors as required to support development or transfer activities.

Skills

Electrical schematics
Troubleshooting
Test equipment
Documentation
English communication

Education

Diploma in Electrical/Electronics/Mechatronics

Tools

Multimeter
Oscilloscope
Calibration equipment

Job description

Boston Scientific Medical Device (Malaysia) Sdn. Bhd. 4.1 View all jobs

This role is based in Malaysia, Penang. Please note that Boston Scientific does not offer relocation support for this position. Applicants should be based in, or have valid work authorization for this location.

Purpose Statement

The Capital Equipment Technician is responsible for performing complex technical activities to ensure capital equipment meets established quality, performance, and reliability standards. Working with minimal supervision, the technician independently performs equipment setup, testing, servicing, troubleshooting, and technical investigations to identify equipment failures, determine root causes, and implement appropriate corrective actions. Some assignments require independent judgment and problem-solving when established procedures are unavailable.

The successful candidate will demonstrate strong technical expertise, proficiency in spoken and written English, and the ability to effectively communicate technical issues, accurately document investigation findings and corrective actions in designated systems and collaborate with cross-functional teams to support equipment reliability and continuous improvement.

Responsibilities
  • Perform failure analysis, troubleshooting, and component-level diagnosis of electronic and electromechanical medical equipment using schematics, engineering drawings, repair work instructions, and appropriate diagnostic tools.
  • Perform repair, servicing, setup, inspection, testing, calibration, preventive maintenance, and performance verification of capital equipment in accordance with approved procedures and specifications.
  • Investigate test equipment failures and analyze test results to identify root causes, recurring failure trends, and opportunities to improve test equipment reliability, serviceability, repair effectiveness, and turnaround time.
  • Supports Manufacturing Engineering and R&D with the testing of new products transfer as required including installation, setup, calibration, debugging, technical evaluation, and development or improvement of repair and service procedures.
  • Support validation and technical investigation activities through equipment testing, data collection and analysis, documentation of results, and collaboration with Engineering, Quality, Manufacturing, and other cross-functional teams.
  • Provide cross-training and technical guidance to other technicians and internal or external stakeholders as required.
  • Performs and explains the testing of products during a tour, inspection or audit.
  • Travel to other sites/vendors as required to support technology development or transfer activities.
Key Skills & Requirements
  • Minimum Diploma or equivalent technical qualification in Electrical, Electronics, Mechatronics, Mechanical Engineering, or a related discipline.
  • Minimum 4-5 years of relevant experience in equipment testing, troubleshooting, servicing, repair or maintenance.
  • Experience in the medical device industry is preferred; however, candidates from other relevant technical industries are also encouraged to apply.
  • Proficient in interpreting technical drawings, electrical schematics, wiring diagrams, and equipment specifications.
  • Demonstrated ability to independently troubleshoot equipment failures, conduct technical investigations, identify root causes, and determine appropriate corrective actions.
  • Experience in documenting technical investigations, troubleshooting activities, findings, and corrective actions is preferred.
  • Basic understanding of Quality Management Systems (QMS), Good Manufacturing Practices (GMP), documentation requirements, and applicable quality procedures.
  • Experience in documenting technical investigations, troubleshooting activities, findings, or corrective actions.
  • Strong analytical, problem-solving, and cross-functional collaboration skills.
  • Proficient and fluent in spoken and written English.

Requisition ID:637861

As a leader in medical science for more than 40 years, we are committed to solving the challenges that matter most - united by a deep caring for human life. Our mission to advance science for life is about transforming lives through innovative medical solutions that improve patient lives, create value for our customers, and support our employees and the communities in which we operate. Now more than ever, we have a responsibility to apply those values to everything we do - as a global business and as a global corporate citizen.

So, choosing a career with Boston Scientific (NYSE: BSX) isn't just business, it's personal. And if you're a natural problem-solver with the imagination, determination, and spirit to make a meaningful difference to people worldwide, we encourage you to apply and look forward to connecting with you!

Unlock job insights

Hirer responsiveness Salary match Number of applicants

Pharmaceuticals, Biotechnology & Medical Devices 1,001-5,000 employees

Your work can make a difference.

Imagine knowing that what you do every day contributes to technologies that help improve millions of lives.

For more than 45 years, Boston Scientific has been transforming lives through innovative medical technologies

And Penang is part of that global story.

Our Penang site became first manufacturing facility in Asia, with the plant completed in 2017. Today, we supports manufacturing and APAC regional distribution operations, connecting the work of our local teams with patients & healthcare systems around the world.

Here you can learn, collaborate, innovate & grow while contributing to a purpose bigger than any one role.

Your work can make a difference.

Imagine knowing that what you do every day contributes to technologies that help improve millions of lives.

For more than 45 years, Boston Scientific has been transforming lives through innovative medical technologies

And Penang is part of that global story.

Our Penang site became first manufacturing facility in Asia, with the plant completed in 2017. Today, we supports manufacturing and APAC regional distribution operations, connecting the work of our local teams with patients & healthcare systems around the world.

Here you can learn, collaborate, innovate & grow while contributing to a purpose bigger than any one role.

Researching careers? Find all the information and tips you need on career advice.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Capital Equipment Repair Technician, APAC
Capital Equipment Repair Technician, APAC

Boston Scientific • Penang

On-site
MYR 48,000 - 72,000
Senior Manufacturing Engineer
Senior Manufacturing Engineer

BOSTON SCIENTIFIC MEDICAL DEVICE (MALAYSIA) SDN. BHD. • Batu Kawan

On-site
MYR 120,000 - 180,000
Manufacturing Equipment Technician (Electrical/Electronic) - Salary up to RM4k
Manufacturing Equipment Technician (Electrical/Electronic) - Salary up to RM4k

BOSTON SCIENTIFIC MEDICAL DEVICE (MALAYSIA) SDN. BHD. • Batu Kawan

On-site
MYR 41,000 - 49,000
Daily Meal Allowance
Wellness Allowance RM1500 cash after 

EPF 15%
+5
Quality Engineer
Quality Engineer

BOSTON SCIENTIFIC MEDICAL DEVICE (MALAYSIA) SDN. BHD. • Batu Kawan

On-site
MYR 60,000 - 100,000
Manufacturing Equipment Technician (Electrical/Electronic)
Manufacturing Equipment Technician (Electrical/Electronic)

BOSTON SCIENTIFIC MEDICAL DEVICE (MALAYSIA) SDN. BHD. • Batu Kawan

On-site
MYR 67,000 - 100,000
Manufacturing Process Engineer
Manufacturing Process Engineer

BOSTON SCIENTIFIC MEDICAL DEVICE (MALAYSIA) SDN. BHD. • Batu Kawan

On-site
MYR 56,000 - 100,000
Capital Equipment Repair Technician — APAC (Penang)
Capital Equipment Repair Technician — APAC (Penang)

Boston Scientific Medical Device (Malaysia) Sdn. Bhd. • Penang

On-site
MYR 52,000 - 86,000
Business Systems Analyst III, APAC
Business Systems Analyst III, APAC

Boston Scientific Medical Device (Malaysia) Sdn. Bhd. • Penang

On-site
MYR 90,000 - 150,000
Medical Equipment Repair Technician – APAC (Penang)
Medical Equipment Repair Technician – APAC (Penang)

Boston Scientific • Penang

On-site
MYR 48,000 - 72,000
Senior Indirect Sourcing Manager
Senior Indirect Sourcing Manager

Boston Scientific Medical Device (Malaysia) Sdn. Bhd. • Penang

On-site
MYR 180,000 - 280,000