System & Solution Integration Engineer

THE HI-TECH ROBOTIC SYSTEMZ LIMITED; Pune District; In loco; INR 900.000 - 1.300.000; Tempo pieno

Descrizione del lavoro

THE HI-TECH ROBOTIC SYSTEMZ LIMITED in Pune, India seeks an AMR Deployment Engineer to deploy, configure, integrate, validate and commission mobile robots in customer facilities.

The role involves site assessments, deployment planning, and hands-on testing, with travel up to 90% to customer sites and close collaboration with engineering and operations.

You will train operators, produce deployment docs, monitor performance metrics, and contribute to reliability improvements through field feedback.

Competenze

• Hands-on experience with mobile robots/AMRs deployment.
• Familiarity with ROS1.
• Understanding of navigation/localization (SLAM, costmaps, sensor fusion).
• Basic networking and system integration knowledge (IP, subnets, VPNs).
• Experience with sensors (LiDAR, cameras, IMUs, encoders).
• Ability to read electrical/mechanical interfaces.
• Strong troubleshooting methodology.
• Good communication for cross-functional/customer-facing work.

Mansioni

• Survey facility layout, floor conditions, robot path patterns and constraints.
• Install and configure Autonomous Mobile Robots at customer sites.
• Calibrate and optimize navigation/control.
• Perform safety validation and tests.
• Set up wireless network and test robot communications.
• Train operators and hand over deployment docs.
• Monitor initial deployments and collect metrics; feedback to engineering.

Conoscenze

Mobile AMR deployment

ROS1

Navigation & localization

Basic networking

Sensors (LiDAR, cameras, IMUs)

Electrical/mechanical interfacing

Troubleshooting

Cross-functional communication

Strumenti

ROS1

MQTT

OPC-UA

CAN/Ethernet

Wi‑Fi

Descrizione del lavoro

We are looking for a AMR Deployment Engineer. The engineer is responsible for deploying, configuring, integrating, validating, and commissioning mobile robots (AMRs/AGVs) in a customer facility. They bridge the gap between the robot system (hardware + software) and the operational environment, ensuring reliable, safe, and efficient operation.

This role would require travelling upto 90% of time.

Key Responsibilities

Site Assessment & Preparation

• Survey facility layout, floor conditions, robot path patterns and complications, and infrastructure.
• Identify environmental constraints such as space requirements, movement blockers etc
• Recommend and help implement necessary site modifications (markings, safety zones, access point configuration).

Deployment & Integration

• Install and configure Autonomous Mobile Robots at customer sites.
• Calibrate and optimize navigation/control.
• Perform tests to ensure safety and performance.
• Setup wireless network and test communication between Robots in the environment
• Configure networking, localization anchors/markers, AMR Maps and Operations
• Develop and execute deployment test plans: functional, performance, safety, edge-case scenarios, payload handling & safety stops
• Tune navigation and control parameters for the specific environment
• Perform safety validation (emergency stop, zone enforcement, human-robot interaction limits).

Training & Handover

• Train operators/maintenance staff on daily operation, basic troubleshooting, and safety procedures.
• Produce and deliver deployment documentation: site-specific configuration, SOPs, failure modes, recovery steps.
• Monitor initial deployments for anomalies, collect metrics (uptime, navigation success rate, intervention frequency).
• Feedback insights to engineering/R&D for reliability improvements.
• Perform root-cause analysis on field issues and implement corrective actions.

Required Skills & Experience

• Hands-on experience with mobile robots / AMRs, preferably in deployment or integration roles.
• Familiarity with ROS1
• Understanding of Navigation/localization (SLAM, costmaps, sensor fusion).
• Basic networking (IP, subnets, Wi-Fi reliability, VPNs) and system integration (MQTT, OPC-UA, etc.).
• Experience with sensors commonly used on AMRs: LiDAR, cameras, IMUs, encoders.
• Ability to read and validate electrical/mechanical interfaces (e.g., verifying power, encoder signals, communication buses like CAN/Ethernet).
• Strong troubleshooting methodology (logs, metrics, repeatable reproduction of issues).
• Good communication skills for cross-functional coordination and customer-facing work.

Nice-to-Have

• Exposure to PLC, Ladder Diagram configurations (Siemens / Mitshibushi) .
• Exposure to Safety Sensor Configuration and Safety Standards (SICK Sensors).
• Experience with warehouse/facility automation systems (WMS, conveyor control).
• Basic programming (Python/C++) for small integration tweaks or diagnostics scripts.
• Data collection and simple analytics (uptime, mean time between interventions).