In-Process Quality Control Engineer

Larsen & Toubro Ltd; Coimbatore; On-site; INR 300,000 - 540,000; Full time

Job summary

Larsen & Toubro Ltd in Coimbatore is seeking an Engineer - Quality IPQC to ensure process compliance and defect prevention across SMT, THT, assembly and testing stages. You will conduct first-off inspections, monitor SPI, placement accuracy and reflow quality.

The role requires hands-on IPQC experience, proficiency with SPC/MSA, PFMEA and CAPA, along with IPC-A-610 guidance and ISO/IATF quality standards.

Qualifications

• Experience in IPQC and in-process quality control.
• Knowledge of SPC, MSA, PFMEA and CAPA.
• Familiar with IPC-A-610 (Class 3) and ISO 9001/IATF 16949.
• Proficient in using precision measuring instruments.
• Ability to ensure traceability and process audits.

Responsibilities

• Perform first-off inspection before mass production release.
• Monitor solder paste height (SPI), placement accuracy, reflow quality.
• Conduct in-process visual inspection as per IPC-A-610 (Class 3 for automotive).
• Monitor critical process parameters (Printing, Reflow profile, Torque values in EPS assembly).
• Verify changeover correctness (Feeder setup, BOM, Program version).
• Ensure traceability scanning at every stage.
• Conduct patrol inspection during production.
• Record and monitor process rejection trends.
• Ensure ESD and MSL compliance on shop floor.
• Stop line in case of major deviation (Quality Gate Authority)

Skills

IPQC

SPC

MSA

PFMEA

CAPA

Root cause analysis

IPC-A-610

ISO 9001

IATF 16949

First-off inspection

Job description

Engineer - Quality IPQC

IPQC – In-Process Quality Control Role Purpose: Ensure process compliance and defect prevention during SMT, THT, Assembly, Testing stages. Experienced in In-Process Quality Control (IPQC), process monitoring, patrol inspection, first piece approval, defect analysis, SPC, MSA, PFMEA, CAPA, root cause analysis, process audits, quality documentation, and implementation of continuous improvement initiatives. Proficient in using precision measuring instruments and ensuring compliance with ISO 9001/IATF 16949 quality standards." Key Responsibilities:

• Perform first-off inspection before mass production release.
• Monitor solder paste height (SPI), placement accuracy, reflow quality.
• Conduct in-process visual inspection as per IPC-A-610 (Class 3 for automotive).
• Monitor critical process parameters (Printing, Reflow profile, Torque values in EPS assembly).
• Verify changeover correctness (Feeder setup, BOM, Program version).
• Ensure traceability scanning at every stage.
• Conduct patrol inspection during production.
• Record and monitor process rejection trends.
• Ensure ESD and MSL compliance on shop floor.
• Stop line in case of major deviation (Quality Gate Authority)