Hardware & Embedded System – Electronics Technician

Irov

Ernakulam

Presencial

INR 250 000 - 450 000

Tempo integral

14 dias+

Recebe uma resposta deste empregador

O teu currículo e carta de apresentação, adaptados exatamente ao que estão a contratar.

Ultrapassa os filtros ATS

Resumo da oferta

Irov in Kerala is seeking a hands-on Electronics Technician for hardware and embedded systems in ROV and marine-electronics projects.

Role focuses on PCB assembly, SMD and through-hole soldering, rework, debugging and validation of complex boards. Experience with diagnostic tools and lab procedures is essential, with travel for field trials possible.

Qualificações

  • Diploma in Electronics or related field required.
  • 1–3 years hands-on PCB assembly, soldering, testing and hardware debugging preferred.
  • Freshers with exceptional practical soldering and debugging skills may be considered.
  • Experience in marine electronics, robotics, ROVs or embedded systems is a plus.

Responsabilidades

  • Assemble prototype and production PCBs with high-quality soldering.
  • Inspect solder joints for defects and perform rework as needed.
  • Troubleshoot hardware faults down to component level using test equipment.
  • Build cable harnesses and connector terminations for assemblies.

Conhecimentos

SMD soldering
Through-hole soldering
PCB debugging
Schematics reading
Microcontrollers
Signal integrity
UART/RS232/RS485
Ethernet interfaces

Formação académica

Diploma in Electronics
Electronics & Communication
Electrical

Ferramentas

Soldering station
Hot-air rework station
Oscilloscope
Multimeter
Logic analyzer

Descrição da oferta de emprego

Job Description – Hardware & Embedded System – Electronics Technician
Job Purpose

To support the R&D Embedded team in the assembly, testing, debugging, modification, repair and validation of electronic circuits, PCBs and cable assemblies used in ROVs and other advanced marine-electronics systems. The technician must be comfortable with fine-pitch SMD and through-hole components, prototype and high-density boards, and must be able to identify and resolve hardware issues independently.

Key Requirement: Hands-on expertise is the primary requirement for this position. Candidates with strong practical PCB soldering, rework, testing and component-level debugging skills will be given high preference.

Key Responsibilities

PCB Assembly & Soldering

  • Perform high-quality SMD and through-hole soldering on prototype and production PCBs.
  • Solder and rework fine-pitch ICs – QFN, QFP, SOIC, TSSOP, 0603 / 0402 and other small SMD components.
  • Perform component replacement, wiring modifications and PCB rework.
  • Inspect solder joints for defects such as bridging, insufficient solder, cold joints, lifted pads, tombstoning and solder shorts.
  • Perform PCB cleaning and post-solder inspection.
  • Handle sensitive electronic components using appropriate ESD protection procedures.

Hardware Debugging & Troubleshooting

  • Perform component-level troubleshooting and debugging of analog, digital, power, communication and mixed-signal circuits.
  • Identify faults using multimeters, oscilloscopes, electronic loads, DC power supplies, function generators, logic analyzers and other laboratory equipment.
  • Trace power rails and signal paths to identify faulty components and circuit-level issues.
  • Troubleshoot problems such as power supply failures, short circuits and excessive current consumption, incorrect voltage levels, communication failures, component overheating, signal integrity issues, intermittent faults and PCB assembly defects.
  • Perform systematic root-cause analysis and implement corrective actions.

PCB Rework & Repair

  • Carry out component-level PCB repair and rework on prototype and assembled boards.
  • Replace damaged or defective ICs, capacitors, resistors, connectors, diodes, MOSFETs, regulators and other components.
  • Perform pad / track repair and wire modifications where required.
  • Use hot-air rework stations, soldering stations, preheaters / hot plates, microscopes and other rework equipment safely.
  • Support R&D engineers during prototype modifications and design validation.

Testing & Validation

  • Perform functional testing of electronic circuits and PCB assemblies according to test procedures.
  • Conduct power-up testing, current-consumption measurements, load testing, communication testing and voltage / signal verification.
  • Assist engineers in prototype validation and debugging.
  • Record test results, observations, failures and corrective actions.
  • Support environmental and reliability testing when required.

Cable Harness, Sealing & ROV Integration

  • Build and terminate cable harnesses, tethers and connector assemblies, including crimping, heat-shrink and sealing of waterproof / underwater connectors.
  • Carry out potting, encapsulation and conformal coating of electronics as per process instructions.
  • Integrate electronics into ROV sub-assemblies (pressure housings, thrusters, cameras, lights, sensors) and support system-level, tank and field trials.

R&D Support

  • Work closely with hardware design engineers during prototype development and bring-up.
  • Assist in PCB assembly and testing of new designs.
  • Support engineering teams in troubleshooting field-returned or failed boards.
  • Provide practical feedback on PCB assembly, solderability, component placement, accessibility and reworkability.
  • Maintain proper documentation of modifications and rework performed on prototype boards.

Lab, Inventory & Quality

  • Maintain the lab inventory of components, consumables and tools; raise material requests and support BOM kitting with Stores.
  • Keep the electronics lab organised and ESD-safe, and keep track of equipment calibration and maintenance.
  • Follow quality procedures, using IPC workmanship standards as the reference for solder joint acceptance.
Required Qualifications & Experience
  • Education: Diploma in Electronics, Electronics & Communication, Electrical or a related field.
  • Experience: 1-3 years of hands-on experience in PCB assembly, soldering, electronics testing and hardware debugging preferred. Freshers with exceptional practical soldering and debugging skills may also be considered.
  • Preferred Experience: Prototype PCBs and R&D hardware; fine-pitch SMD soldering and PCB rework; component-level fault diagnosis; debugging power electronics and communication interfaces.
  • Industry Exposure: Marine electronics, robotics, ROVs, industrial electronics or embedded systems will be an added advantage.
Skills & Competencies

Technical / Functional Skills (Must Have)

  • Excellent SMD and through-hole soldering, including fine-pitch ICs
  • Strong PCB debugging and component-level fault-finding
  • Good understanding of electronic components and their operation
  • Reading and understanding schematics, PCB layouts and datasheets
  • Working knowledge of digital and analog circuits, DC-DC converters and power supplies, microcontrollers and embedded hardware
  • Interfaces: UART, RS232, RS485, I2C, SPI and Ethernet
  • Connectors, protection circuits and power distribution
  • Measurement of voltage, current, resistance, continuity and power
  • Effective use of multimeter and oscilloscope for hardware debugging
  • PCB inspection and rework techniques
  • Cable harness making, crimping and connector termination
  • ESD handling and electronic laboratory safety

Tools & Equipment

  • Soldering station, hot-air rework station, hot plate / preheater
  • Digital multimeter, oscilloscope, LCR meter
  • DC power supply, electronic load, function / signal generator, logic analyzer
  • Microscope or magnifying inspection system
  • Crimping tools, wire strippers and heat gun
  • ESD-safe workstations and tools

Good to Have

  • Potting / encapsulation and conformal coating
  • Flashing firmware on microcontroller boards (Arduino / STM32)
  • Safe handling of Li-ion battery packs, motors and ESCs

Behavioral / Soft Skills

  • Analytical and systematic approach to fault finding
  • Attention to detail
  • Ability to work independently on hardware failures
  • Good documentation skills
  • Ability to work effectively with R&D engineers; able to handle requests from multiple engineers
  • Ownership and reliability
  • Willingness to work on prototype and experimental hardware
  • Willingness to support tank / field trials and occasional travel
  • Strong safety and ESD awareness
Key Performance Indicators (KPIs)
  • First-pass yield of assembled PCBs and harnesses (defects caught at inspection / testing)
  • Turnaround time for assembly, rework and debug requests vs agreed timelines
  • Rework or failure rate attributable to workmanship
  • Time-to-diagnose and fix rate for failed and field-returned boards
  • Completeness and accuracy of test records, rework logs and modification documentation
  • Lab inventory accuracy; no builds blocked by missed material requests
  • Compliance with ESD and safety audits

Performance Expectations – the candidate should be able to independently:

  • Assemble prototype PCBs with high-quality soldering
  • Inspect PCBs and identify assembly defects
  • Power up and safely test new hardware
  • Debug hardware faults down to component level
  • Perform SMD component replacement and PCB rework
  • Use laboratory instruments to diagnose electrical and signal-level problems
  • Document failures, modifications, test results and corrective actions
  • Support engineers during prototype development and hardware validation
Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Hardware & Embedded System – Electronics Technician
Hardware & Embedded System – Electronics Technician

Eyerov- • Índia

Presencial
INR 240 000 - 360 000
Hardware & Embedded System - Electronics Technician
Hardware & Embedded System - Electronics Technician

Eyerov • Ernakulam

Presencial
INR 150 000 - 210 000
Electronics Engineer Intern
Electronics Engineer Intern

IROV • Ernakulam

Presencial
INR 100 000 - 167 000
Stipend as per policy
Hardware Pcb Design Engineer
Hardware Pcb Design Engineer

Akira Controls • Coimbatore

Presencial
INR 600 000 - 1 000 000
Electronics Engineer Intern
Electronics Engineer Intern

Eyerov • Ernakulam

Presencial
INR 100 000 - 167 000
Soldering Operator
Soldering Operator

Cyient Limited • Hyderabad

Presencial
INR 250 000 - 350 000
Electronics Lab Technician
Electronics Lab Technician

Defendron Technologies • Maharashtra

Presencial
INR 300 000 - 600 000
Competitive compensation
Paid annual leave
Health & medical insurance
+2
Senior Lab technician (Lab In-Charge – Rework & Assembly)
Senior Lab technician (Lab In-Charge – Rework & Assembly)

UST • Bengaluru Urban

Presencial
INR 900 000 - 1 300 000
Project Engineer – Electrical Hardware
Project Engineer – Electrical Hardware

Husco • Maharashtra

Presencial
INR 800 000 - 1 200 000
Lab Technician - Rework & Assembly
Lab Technician - Rework & Assembly

UST • Bengaluru Urban

Presencial
INR 600 000 - 900 000