Composite Technician

AQUAAIRX AUTONOMOUS SYSTEMS

Karnataka

On-site

INR 260,000 - 420,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

AQUAAIRX AUTONOMOUS SYSTEMS, a Bengaluru-based deep-tech startup, seeks a Composite Technician to manufacture fibre-reinforced parts for UAVs with strict quality and traceability. The role emphasizes following layup schedules, materials handling, and precise workmanship on carbon, glass, and aramid fabrics.

The ideal candidate has ITI/ diploma training with 1–3 years in composites, able to read drawings, and perform cure processes. Freshers with aptitude may be considered.

Qualifications

  • ITI / Diploma in Mechanical, Aerospace, Composites, Plastics, or related; degree is a plus.
  • 1–3 years in composite manufacturing; freshers with strong training may be considered.
  • Hands-on prepreg or wet layup, vacuum bagging, and oven/autoclave curing.
  • Ability to read engineering drawings and ply books including fibre orientation symbols.
  • Use of measuring tools and knowledge of carbon, glass, and aramid fabrics, resins.

Responsibilities

  • Follow layup procedures and ensure correct ply order and orientation.
  • Prepare molds, lay up carbon/glass/aramid fabrics; cure with oven/autoclave.
  • Perform debulking, bagging, cure cycle monitoring, demold and finish.
  • Carry out quality checks, documentation, and traceability.
  • Maintain clean room practices and safety compliance.

Skills

Read engineering drawings
Layup techniques
Vacuum bagging
Autoclave curing
Measuring tools
Composite materials
Safety procedures

Education

ITI / Diploma in Mechanical or related field
Diploma in Composite Technology

Tools

Measuring tools (vernier caliper, micrometer)
Oven/Autoclave equipment

Job description

We're AquaAirX Autonomous Systems - a Bengaluru-based deep-tech startup building autonomous underwater and amphibious robots. Think inspection-class hovering AUVs that map dams and offshore assets (NEXOR), amphibious platforms that transition between air and water (AVATAAR), and an AI-native ocean data platform (DeepNimbus).

"Oh, and we're funded by Rainmatter (Zerodha) — so yes, the people who backed us know a thing or two about building for the long haul."

We work with defence, energy, and maritime customers on problems that genuinely matter, underwater infrastructure that nobody can see, but everybody depends on. Our founders are Forbes Asia 30 Under 30. Our robots have real deployments behind them, not just renders. The vibe is: small team, huge ambition, zero tolerance for "that's not my job."

If "I built a wing skin that actually flew" sounds like a flex you want on your bio — keep reading.

The role, minus the corporate fluff

We need a Composite Technician who is equal parts craftsperson, quality inspector, and clean-room stickler. You'll manufacture fibre-reinforced composite parts for our UAVs — wing skins, fuselage shells, spars, booms, and fairings — and make sure every one is accurate, lightweight, and fully traceable.

This is not a "lay it up and hope" role. This is a follow-the-ply-book, record-every-lot, stop-work-if-something's-off role at a company where the part you cure today ends up flying tomorrow.

1. The Layup Artist — Production (Every ply, in the right order, at the right angle. No shortcuts.)

Read and follow drawings, ply books, route cards, and work instructions.

Receive, store, and thaw prepreg and other materials, and record lot numbers and out-time.

Prepare molds and tools: clean, inspect, and apply release agent. Cut and kit plies, and lay up carbon, glass, or aramid fabric in the correct sequence and fibre orientation.

Place core, inserts, adhesives, and potting compounds as specified. Perform debulking, vacuum bagging, and bag leak checks.

Load and unload parts from the autoclave or oven, set up cure cycles, and monitor thermocouples and data loggers. Demold, trim, drill, and finish parts using hand tools and machines.

Carry out bonding and secondary assembly of composite parts.

Perform minor repairs only under an approved repair scheme.

2. The Quality Keeper — Quality & Documentation (If it isn't recorded, it did not happen. If it's out of spec, it does not ship.)

Complete route cards, ply verification sheets, material traceability, and cure records accurately and on time.

Carry out visual inspection and basic dimensional checks, and report defects immediately.

Support NDT (tap test, ultrasonic) and witness coupon preparation when required.

Stop work and inform the supervisor if materials, tools, or conditions are out of specification.

Segregate and tag non-conforming material and assist with NCR investigation.

3. The Clean Room Guardian — Housekeeping, Safety & Equipment (A contamination-free workspace is half the part.)

Maintain a clean, contamination-free work area and follow clean room rules.

Use PPE correctly, including gloves, respirator or dust mask, safety glasses, and protective clothing.

Handle resins, solvents, and release agents safely, and dispose of waste as per procedure.

Perform daily care of tools, vacuum pumps, ovens, and cutting equipment, and report faults.

Follow safety rules for pressure vessels, hot surfaces, sharp tools, and dust.

4. The Team Player — Handovers & Improvement (Cure cycles don't stop at shift change. Neither does good communication.)

Hand over work clearly between shifts.

Support process improvement, reduce waste and rework, and help train new team members.

What you bring

The hard skills:

ITI / Diploma in Mechanical, Aerospace, Composites, Plastics, or a related field (or equivalent). A degree in Engineering is a plus but not required.

1 to 3 years in composite manufacturing, preferably in aerospace, UAV, motorsport, or marine. Freshers with strong training and aptitude may be considered at a lower grade.

Hands-on prepreg or wet layup, vacuum bagging, and oven or autoclave curing.

Ability to read engineering drawings and ply books, including fibre orientation symbols.

Use of measuring tools: vernier caliper, micrometer, steel rule, and weighing scale.

Knowledge of composite materials: carbon, glass, and aramid fabrics, epoxy resins, core materials, and adhesives.

Safe handling of cutting tools, routers, and drilling equipment for composites.

The human skills (non-negotiable):

Attention to detail — patience for precise, repetitive work.

Discipline — you follow procedures and record data honestly.

Honesty about mistakes — you report them early, not late.

Clear communication and teamwork — on the floor and at shift handover.

Flexibility — you work to deadlines and adapt to shift or schedule changes.

Required Skills

Manufacturing methods Glass Fabric Wet layup

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Composite Technician
Composite Technician

AquaAirx Autonomous Systems • Bengaluru

On-site
INR 350,000 - 520,000
Composite Technician
Composite Technician

Ubifly Technologies • Chennai District

On-site
INR 550,000 - 900,000
Competitive salary and benefits
Growth opportunities
Challenging projects
Composite Technician
Composite Technician

ePlane Company • Chennai District

On-site
INR 500,000 - 800,000
Competitive salary
Benefits package
Growth opportunities
Composite Technician
Composite Technician

ePlane Company • Chennai

On-site
INR 600,000 - 900,000
Composite Engineer
Composite Engineer

IG Defence • Dadri

On-site
INR 800,000 - 1,500,000
Attractive salary package
Internship + probation training
Assistant Manager III - Manufacturing
Assistant Manager III - Manufacturing

NewSpace Research and Technologies • Bengaluru

On-site
INR 1,200,000 - 1,800,000
UAV Composite Design Engineer
UAV Composite Design Engineer

Yali Aerospace • Thanjavur

On-site
INR 600,000 - 1,000,000
Annual recognition bonus based on performance
Supportive team culture
Composite Manufacturing
Composite Manufacturing

Naveria Space Technologies Pvt Ltd • India

On-site
INR 350,000 - 520,000
Hyderabad - Advanced Composites (JSW UAV Defence)
Hyderabad - Advanced Composites (JSW UAV Defence)

JSW Defence • Hyderabad

On-site
INR 900,000 - 1,500,000
Manufacturing Engineer - Composites(assembly)
Manufacturing Engineer - Composites(assembly)

ePlane Company • Chennai District

On-site
INR 900,000 - 1,400,000