Composite Technician

AquaAirx Autonomous Systems

Bengaluru

On-site

INR 350,000 - 520,000

Full time

16 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

AquaAirX Autonomous Systems, based in Bengaluru, seeks a Composite Technician to manufacture fibre-reinforced parts for UAVs and amphibious platforms. You will follow ply books, manage cure cycles, and ensure traceability of every part.

This role blends craft, inspection, and clean-room rigor. Ideal candidates have ITI/ diploma in related fields, 1–3 years in composites, and hands-on experience with prepreg layup, vacuum bagging, and curing.

Qualifications

  • ITI / Diploma in Mechanical, Aerospace, Composites, Plastics, or related field.
  • Engineering degree is a plus but not required.
  • 1–3 years in composite manufacturing, preferably aerospace/UAV/marine.
  • Hands-on prepreg layup, vacuum bagging, and curing.
  • Ability to read engineering drawings and ply books.

Responsibilities

  • Follow layup instructions for fibre orientation and sequence.
  • Prepare molds, lay up carbon/glass/aramid fabrics as specified.
  • Operate autoclave/oven curing and monitor cure cycles.
  • Demold, trim, drill, and finish parts to spec.
  • Maintain clean-room discipline and safety procedures.
  • Document lot numbers, traceability, and inspection data.

Skills

Prepreg layup
Vacuum bagging
Autoclave curing
Reading drawings
Ply books
Attention to detail
Teamwork

Education

ITI / Diploma in Mechanical, Aerospace, Composites, Plastics
Engineering degree is a plus

Tools

Vernier caliper
Micrometer
Steel rule
Weighing scale

Job description

We're AquaAirX Autonomous Systems - a Bengaluru-based deep-tech startup building autonomous underwater and amphibious robots. Think inspection-class hovering AUVs that map dams and offshore assets (NEXOR), amphibious platforms that transition between air and water (AVATAAR), and an AI-native ocean data platform (DeepNimbus).

"Oh, and we're funded by Rainmatter (Zerodha) — so yes, the people who backed us know a thing or two about building for the long haul."

We work with defence, energy, and maritime customers on problems that genuinely matter, underwater infrastructure that nobody can see, but everybody depends on. Our founders are Forbes Asia 30 Under 30. Our robots have real deployments behind them, not just renders. The vibe is: small team, huge ambition, zero tolerance for "that's not my job."

If "I built a wing skin that actually flew" sounds like a flex you want on your bio — keep reading.

The role, minus the corporate fluff

We need a Composite Technician who is equal parts craftsperson, quality inspector, and clean-room stickler. You'll manufacture fibre-reinforced composite parts for our UAVs — wing skins, fuselage shells, spars, booms, and fairings — and make sure every one is accurate, lightweight, and fully traceable.

This is not a "lay it up and hope" role. This is a follow-the-ply-book, record-every-lot, stop-work-if-something's-off role at a company where the part you cure today ends up flying tomorrow.

1. The Layup Artist — Production (Every ply, in the right order, at the right angle. No shortcuts.)

Read and follow drawings, ply books, route cards, and work instructions.

Receive, store, and thaw prepreg and other materials, and record lot numbers and out-time.

Prepare molds and tools: clean, inspect, and apply release agent. Cut and kit plies, and lay up carbon, glass, or aramid fabric in the correct sequence and fibre orientation.

Place core, inserts, adhesives, and potting compounds as specified. Perform debulking, vacuum bagging, and bag leak checks.

Load and unload parts from the autoclave or oven, set up cure cycles, and monitor thermocouples and data loggers. Demold, trim, drill, and finish parts using hand tools and machines.

Carry out bonding and secondary assembly of composite parts.

Perform minor repairs only under an approved repair scheme.

2. The Quality Keeper — Quality & Documentation (If it isn't recorded, it did not happen. If it's out of spec, it does not ship.)

Complete route cards, ply verification sheets, material traceability, and cure records accurately and on time.

Carry out visual inspection and basic dimensional checks, and report defects immediately.

Support NDT (tap test, ultrasonic) and witness coupon preparation when required.

Stop work and inform the supervisor if materials, tools, or conditions are out of specification.

Segregate and tag non-conforming material and assist with NCR investigation.

3. The Clean Room Guardian — Housekeeping, Safety & Equipment (A contamination-free workspace is half the part.)

Maintain a clean, contamination-free work area and follow clean room rules.

Use PPE correctly, including gloves, respirator or dust mask, safety glasses, and protective clothing.

Handle resins, solvents, and release agents safely, and dispose of waste as per procedure.

Perform daily care of tools, vacuum pumps, ovens, and cutting equipment, and report faults.

Follow safety rules for pressure vessels, hot surfaces, sharp tools, and dust.

4. The Team Player — Handovers & Improvement (Cure cycles don't stop at shift change. Neither does good communication.)

Hand over work clearly between shifts.

Support process improvement, reduce waste and rework, and help train new team members.

What you bring

The hard skills:

ITI / Diploma in Mechanical, Aerospace, Composites, Plastics, or a related field (or equivalent). A degree in Engineering is a plus but not required.

1 to 3 years in composite manufacturing, preferably in aerospace, UAV, motorsport, or marine. Freshers with strong training and aptitude may be considered at a lower grade.

Hands-on prepreg or wet layup, vacuum bagging, and oven or autoclave curing.

Ability to read engineering drawings and ply books, including fibre orientation symbols.

Use of measuring tools: vernier caliper, micrometer, steel rule, and weighing scale.

Knowledge of composite materials: carbon, glass, and aramid fabrics, epoxy resins, core materials, and adhesives.

Safe handling of cutting tools, routers, and drilling equipment for composites.

The human skills (non-negotiable):

Attention to detail — patience for precise, repetitive work.

Discipline — you follow procedures and record data honestly.

Honesty about mistakes — you report them early, not late.

Clear communication and teamwork — on the floor and at shift handover.

Flexibility — you work to deadlines and adapt to shift or schedule changes.

Required Skills

Manufacturing methods Glass Fabric Wet layup

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Composite Technician
Composite Technician

AQUAAIRX AUTONOMOUS SYSTEMS • Karnataka

On-site
INR 260,000 - 420,000
Composite Technician
Composite Technician

Ubifly Technologies • Chennai District

On-site
INR 550,000 - 900,000
Competitive salary and benefits
Growth opportunities
Challenging projects
Composite Technician
Composite Technician

ePlane Company • Chennai District

On-site
INR 500,000 - 800,000
Competitive salary
Benefits package
Growth opportunities
Composite Technician
Composite Technician

ePlane Company • Chennai

On-site
INR 600,000 - 900,000
Composite Engineer
Composite Engineer

IG Defence • Dadri

On-site
INR 800,000 - 1,500,000
Attractive salary package
Internship + probation training
Assistant Manager III - Manufacturing
Assistant Manager III - Manufacturing

NewSpace Research and Technologies • Bengaluru

On-site
INR 1,200,000 - 1,800,000
UAV Composite Design Engineer
UAV Composite Design Engineer

Yali Aerospace • Thanjavur

On-site
INR 600,000 - 1,000,000
Annual recognition bonus based on performance
Supportive team culture
Hyderabad - Advanced Composites (JSW UAV Defence)
Hyderabad - Advanced Composites (JSW UAV Defence)

JSW Defence • Hyderabad

On-site
INR 900,000 - 1,500,000
Manufacturing Engineer - Composites(assembly)
Manufacturing Engineer - Composites(assembly)

ePlane Company • Chennai District

On-site
INR 900,000 - 1,400,000
Quality Engineer
Quality Engineer

skyroot.in • Hyderabad

On-site
INR 900,000 - 1,200,000