Chemical and Materials Engineer (Facility)

3D Glass Solutions, Inc.; Khordha; On-site; INR 1,500,000 - 2,800,000; Full time

Job summary

3D Glass Solutions, Inc. in Bhubaneswar, Odisha, seeks a Chemical and Materials Engineer to lead process chemistry on a high-variation wet-chemistry line, ensure safe handling, and guide cross-functional teams across process, facilities, and EHS.

You will own analytical lab setup, bath analytics, and data management to protect yield and the environment. In this hands-on role, you will evaluate chemical selections, ensure tool compatibility, manage wastewater treatment, and support

Qualifications

• Master's degree in Chemistry or Chemical Engineering (Ph.D. preferred) with 7+ years industrial experience.
• Hands-on experience with panel-level manufacturing processes.
• Working knowledge of chemistry–tool and chemistry–material compatibility in a wet-process environment.
• Experience with wastewater/effluent treatment chemistry and with chemical delivery/bulk-dispense systems.
• Proven track record setting up and running an analytical chemistry laboratory, including instrumentation selection and method development.

Responsibilities

• Advise the process-engineering team on chemical selection across unit processes while balancing performance, cost, safety, and environmental impact.
• Evaluate and qualify chemistry compatibility with tools, wetted materials, and system components; identify risks and mitigations.
• Own the chemistry of wastewater and effluent treatment, ensuring discharge permits and regulatory compliance.
• Specify, qualify, and support chemical-delivery and bulk-dispense systems for reliable supply to tools.
• Establish and lead the site's analytical chemistry laboratory, including data management and staff training.

Skills

Process chemistry

Industrial experience

Panel-level manufacturing

Analytical laboratory setup

SDS/MSDS safety

Education

Master's degree in Chemistry or Chemical Engineering

Ph.D. preferred

Tools

ICP‑OES/AA

Ion chromatography

HPLC

Titration

Cyclic voltammetry

FTIR/UV‑Vis

Job description

Chemical and Materials Engineer

Facility - Bhubaneswar, Odisha

The Process Chemist is the factory's chemistry authority, supporting a panel-level advanced-packaging line that runs a wide range of wet chemistries — cleans, etches, electroless and electrolytic plating baths, develop and strip chemistries, desmear, and surface finish. You will guide the engineering teams on which chemicals to select and use, ensure those chemistries are compatible with the tools and materials they touch, own the safe delivery and disposal of chemicals across the facility, and be the go‑to resource for safety data and handling requirements.

This is a hands‑on, cross‑functional role at the intersection of process engineering, facilities, and environmental health and safety (EHS). The chemistries on this line are demanding and, in several cases, hazardous, so sound chemical judgment directly protects yield, uptime, the environment, and the people on the floor.

Responsibilities

• Chemical selection and process support. Advise the process-engineering team on which chemicals and formulations to select and use across each unit process — cleans, etches, plating baths, develop/strip, desmear, and surface finish — balancing performance, cost, reliability, safety, and environmental impact, and supporting bath make‑up, replenishment, analytics, and troubleshooting.
• Chemistry and tool compatibility. Evaluate and qualify the compatibility of chemistries with process tools, wetted materials, plumbing, seals, and the glass panels and package materials themselves; identify corrosion, contamination, and material‑degradation risks and recommend compatible alternatives or mitigations.
• Wastewater treatment. Own the chemistry of wastewater and effluent treatment — neutralization, metals precipitation/recovery, fluoride treatment, and abatement — ensuring the facility meets discharge permits and environmental regulations, and partnering with facilities on treatment‑system design, operation, and monitoring.
• Chemical delivery units (CDS). Specify, qualify, and support chemical‑delivery and bulk‑dispense systems (chemical delivery units, blending/dosing, and point‑of‑use delivery), ensuring accurate, safe, and reliable supply of chemistries to the tools, and defining maintenance and change‑out procedures.
• Analytical laboratory setup and operation. Establish and lead the site's analytical chemistry laboratory from the ground up — defining the lab layout and safety infrastructure, specifying and qualifying instrumentation (e.g., ICP‑OES/AA, ion chromatography, HPLC, titration and cyclic‑voltammetric stripping for bath analytics, pH/conductivity, FTIR/UV‑Vis), and developing, validating, and documenting the analytical and bath‑analysis methods that enable real‑time process and quality control. Own calibration, sampling protocols, data management, and lab staffing/training as the capability scales.
• Safety data and hazard management. Serve as the site expert on safety data sheets (SDS/MSDS), chemical hazard classification, storage segregation and compatibility, personal‑protective‑equipment requirements, exposure controls, and emergency response — with particular rigor for high‑hazard chemistries used on the line.
• Cross‑functional partnership and documentation. Work closely with process, equipment, facilities, EHS, and supply‑chain teams and with external chemical suppliers; maintain approved‑chemical lists, specifications, and handling procedures, and support incident investigation, audits, and regulatory reporting.

Minimum Qualifications

• Master's degree in Chemistry, Chemical Engineering, or a closely related field (Ph.D. preferred).
• More than 7 years of relevant industrial experience in process chemistry, wet‑chemical manufacturing, or a comparable environment.
• Hands‑on experience with panel‑level manufacturing processes is required.
• Working knowledge of chemistry–tool and chemistry–material compatibility in a wet‑process manufacturing environment.
• Direct experience with wastewater / effluent treatment chemistry and with chemical delivery / bulk‑dispense systems.
• Demonstrated experience setting up and/or running an analytical chemistry laboratory, including selecting instrumentation and developing/validating analytical and bath‑analysis methods.
• Strong command of safety data sheets (SDS/MSDS), chemical hazard management, and industrial chemical‑safety practices.

Preferred Qualifications

Any of the following are a strong plus:

• Experience working with glass substrates or glass‑based panel processes.
• D. in Chemistry or Chemical Engineering.
• Experience with hydrofluoric acid (HF) and other high‑hazard chemistries, including handling, exposure control, and emergency‑response protocols.
• Experience with electroless and electrolytic plating chemistry, bath analytics, and additive control.
• Familiarity with environmental permitting and regulatory standards (e.g., EPA, OSHA, local discharge and air‑emission requirements) and with EHS management systems.
• Ability to automate data collection, bath‑analytics tracking, or reporting using Python, MATLAB, or AI‑based tools.
• Preference to someone has related experience as mentioned in the JD "responsibilities"