Production Engineer

Solid State Group

South Somerset

On-site

GBP 40,000 - 55,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

EV Salary Sacrifice Scheme
26 Days Annual Leave Plus Bank Holiday
Pensions Plan
Life Assurance Scheme
Profit Share Scheme
All Employee Share Plan

Job summary

Solid State Group, Custom Power division, seeks a proactive Production Engineer to join the Crewkerne, Somerset team. You will own defined manufacturing processes, provide hands-on shop-floor support, and work with Quality, Maintenance and Design Engineering to ensure robust controls and continuous improvement.

You will lead investigations, support NPI and manufacturing transfers, and deliver practical solutions that improve quality, yield and efficiency on the shop floor.

Qualifications

  • A relevant engineering qualification, such as an apprenticeship, HNC, HND or degree, or equivalent practical industry experience.
  • Proven experience in a production or process engineering role within a controlled manufacturing environment.
  • Hands-on experience troubleshooting manufacturing processes, reducing defects and improving production performance.
  • Working knowledge of manufacturing process controls, PFMEA, control plans, SPC, process capability and structured root-cause analysis.
  • Experience creating and maintaining manufacturing documentation, technical work instructions and process specifications.
  • Understanding of process validation, qualification activities and engineering change control.
  • Experience supporting NPI, production transfers or manufacturing process improvements.
  • Strong analytical and problem-solving skills, with the ability to interpret production data and implement practical solutions.
  • Good communication skills and the confidence to work collaboratively with operators, technicians and engineering colleagues.
  • Competence with Microsoft 365 applications and familiarity with ERP or document-control systems.

Responsibilities

  • Manufacturing process improvement: Developing, maintaining and optimising manufacturing processes to improve quality, productivity, repeatability and cost performance.
  • Hands-on production support: Investigating and resolving process problems, equipment and tooling issues, test failures and recurring production defects.
  • Process control and documentation: Creating and maintaining manufacturing process flows, PFMEAs, control plans, technical work instructions and process specifications.
  • Root-cause analysis: Leading structured investigations using techniques such as 5 Why, fishbone analysis and 8D to identify and implement lasting solutions.
  • Process validation: Supporting process characterisation, equipment qualification and validation activities, including IQ/OQ/PQ, ensuring manufacturing processes remain controlled and compliant.
  • New Product Introduction (NPI): Supporting the transfer of new and modified products into production, including manufacturing readiness, process development and engineering changes.
  • Tooling and fixtures: Designing and developing production aids, jigs, fixtures and gauges to improve manufacturing efficiency, accuracy and consistency.
  • Continuous improvement: Using production data, process capability and performance trends to identify opportunities for defect reduction, improved yield and operational efficiency.
  • Cross-functional collaboration: Working with engineering, production and quality teams to resolve technical issues, implement improvements and maintain manufacturing standards.
  • Training and technical guidance: Supporting operators and technicians with process requirements, standard working practices and the implementation of technical changes.

Skills

Problem solving
Analytical skills
Communication
Team collaboration

Education

Engineering qualification or equivalent practical experience

Tools

Microsoft 365
ERP systems

Job description

Whether it’s industrial embedded computing, custom lithium battery packs, secure communication systems, antennas, or imaging technology we design, manufacture and supply it.

From the ocean floor to the edge of space, Custom Power innovation is making sure that vital technology operates consistently, reliably, and above all safely, around the clock. Our products can be found gathering scientific insight in the cold and crushing depths at the ocean floor, transmitting high bandwidth data across hostile terrain, processing colossal amounts of traffic data, and enabling secure ticket sales on board a train.

From the first day of your employment with us, you will be part of an organisation that strives every day to make your work rewarding and cares for your safety and wellbeing.

The Solid State Group is committed to creating a diverse environment and is proud to be an equal opportunity employer. We are committed to providing an inclusive and accessible recruitment process. If you require any reasonable adjustments or support during the application process or interview, please let us know, and we will make the necessary arrangements.

Are you a hands-on Production Engineer who enjoys solving manufacturing challenges, improving processes and making a real difference on the shop floor?

At Custom Power, we're looking for a skilled and proactive Production Engineer to join our Production Engineering team in Crewkerne, Somerset. This is an opportunity to work in a technically challenging manufacturing environment, supporting the production of specialist battery solutions where quality, reliability and precision are essential. You will play a key role in ensuring our manufacturing processes are safe, efficient, consistent and capable of delivering high-quality products. From troubleshooting production issues to introducing improvements and supporting new products into manufacture, you'll have the opportunity to make a tangible impact.

The Role

Reporting to the Lead Production Engineer, you will take ownership of defined manufacturing processes, combining practical shop-floor engineering support with process development, validation and continuous improvement. Working closely with Production, Quality, Maintenance and Design Engineering, you will help maintain robust manufacturing controls, resolve technical challenges and support the successful introduction of new and improved products.

Key responsibilities will include:
  • Manufacturing process improvement: Developing, maintaining and optimising manufacturing processes to improve quality, productivity, repeatability and cost performance.
  • Hands-on production support:Investigating and resolving process problems, equipment and tooling issues, test failures and recurring production defects.
  • Process control and documentation:Creating and maintaining manufacturing process flows, PFMEAs, control plans, technical work instructions and process specifications.
  • Root-cause analysis:** Leading structured investigations using techniques such as 5 Why, fishbone analysis and 8D to identify and implement lasting solutions.
  • Process validation:Supporting process characterisation, equipment qualification and validation activities, including IQ/OQ/PQ, ensuring manufacturing processes remain controlled and compliant.
  • New Product Introduction (NPI):Supporting the transfer of new and modified products into production, including manufacturing readiness, process development and engineering changes.
  • Tooling and fixtures:Designing and developing production aids, jigs, fixtures and gauges to improve manufacturing efficiency, accuracy and consistency.
  • Continuous improvement:Using production data, process capability and performance trends to identify opportunities for defect reduction, improved yield and operational efficiency.
  • Cross-functional collaboration:Working with engineering, production and quality teams to resolve technical issues, implement improvements and maintain manufacturing standards.
  • Training and technical guidance:Supporting operators and technicians with process requirements, standard working practices and the implementation of technical changes.
About You

We are looking for someone who combines strong technical knowledge with a practical, problem-solving approach. You will be comfortable working directly with production teams, investigating issues and implementing improvements that deliver measurable results.

What you will bring:
  • A relevant engineering qualification, such as an apprenticeship, HNC, HND or degree, or equivalent practical industry experience.
  • Proven experience in a production or process engineering role within a controlled manufacturing environment.
  • Hands-on experience troubleshooting manufacturing processes, reducing defects and improving production performance.
  • Working knowledge of manufacturing process controls, including PFMEA, control plans, SPC, process capability and structured root-cause analysis.
  • Experience creating and maintaining manufacturing documentation, technical work instructions and process specifications.
  • Understanding of process validation, qualification activities and engineering change control.
  • Experience supporting NPI, production transfers or manufacturing process improvements.
  • Strong analytical and problem-solving skills, with the ability to interpret production data and implement practical solutions.
  • Good communication skills and the confidence to work collaboratively with operators, technicians and engineering colleagues.
  • Competence with Microsoft 365 applications and familiarity with ERP or document-control systems.
It would be particularly advantageous if you have:
  • Experience in battery-pack assembly, electronics, aerospace or medical-device manufacturing.
  • Knowledge of processes such as crimping, resistance welding, adhesive dispensing, potting, encapsulation or torque-controlled assembly.
  • Experience with electrical testing, automated test equipment, sensors or machine vision systems.
  • Practical experience of IQ/OQ/PQ validation, Gauge R&R, measurement system analysis or manufacturing capability studies.
  • Experience designing or developing manufacturing jigs, fixtures and gauges.
What Makes You a Great Fit?

You will be someone who enjoys being involved in the day-to-day manufacturing environment, takes ownership of challenges and is motivated by finding better ways of working.

You will bring a structured, quality-focused approach, balancing immediate production needs with long-term process improvements. Most importantly, you'll be a collaborative team player who takes pride in delivering results and maintaining high manufacturing standards.

Why Join Custom Power?

At Custom Power, you will have the opportunity to apply your engineering expertise to specialist battery manufacturing, working alongside experienced colleagues and contributing to products where quality and reliability really matter. You will be part of a team that values technical expertise, continuous improvement, collaboration and practical innovation.

If you are a Production Engineer who enjoys solving technical challenges, improving manufacturing performance and seeing your ideas make a difference on the shop floor, we would love to hear from you.

Benefits For You
  • EV Salary Sacrifice Scheme
  • 26 Days Annual Leave Plus Bank Holidays + More For Length of Service
  • Pensions Plan
  • Company Sick Pay Scheme
  • Life Assurance Scheme
  • Profit Share Scheme
  • All Employee Share Plan

We are an equal opportunity employer fostering an inclusive recruitment experience for all candidates.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Lead Design Engineer
Lead Design Engineer

Solid State Group • South Somerset

On-site
GBP 65,000 - 90,000
EV Salary Sacrifice Scheme
26 Days Annual Leave Plus Bank Hol SP
Pensions Plan
+4
Lead Design Engineer
Lead Design Engineer

Custom Power • South Somerset

On-site
GBP 65,000 - 85,000
EV Salary Sacrifice Scheme
26 Days Annual Leave Plus Bank Holiday
Pensions Plan
+4
Project Manager
Project Manager

Custom Power • South Somerset

On-site
GBP 50,000 - 70,000
EV Salary Sacrifice Scheme
26 Days Annual Leave Plus Bank Holidys
Pensions Plan
+4
Production Engineer
Production Engineer

Redline Group • Lower Blandford St Mary

On-site
GBP 42,000 - 56,000
Producton Engineer
Producton Engineer

Simpson Recruitment Services • Newport

On-site
GBP 40,000 - 55,000
Production Engineer
Production Engineer

Deep Sea Electronics Ltd • Hunmanby

On-site
GBP 45,000 - 60,000
Holiday & Bank Holidays
Enhanced Maternity/Paternity pay
5% Pension contributions
+1
Production Engineer - Manufacturing & NPI - ID52111
Production Engineer - Manufacturing & NPI - ID52111

Humand Talent Ltd. • England

Hybrid
GBP 45,000 - 65,000
Production Engineer: Battery Manufacturing & Process Improvement
Production Engineer: Battery Manufacturing & Process Improvement

Solid State Group • South Somerset

On-site
GBP 40,000 - 55,000
EV Salary Sacrifice Scheme
26 Days Annual Leave Plus Bank Holiday
Pensions Plan
+3
Production Technician
Production Technician

Solid State PLC • Tewkesbury

On-site
GBP 26,000 - 32,000
EV Salary Sacrifice
Annual leave
Pensions plan
+4
Production Engineer - Manufacturing
Production Engineer - Manufacturing

Elix Sourcing Solutions • Bristol

Hybrid
GBP 40,000 - 45,000
5% bonus
Hybrid working after probation
Flexible hours
+7