Mazak Technician

Optima UK Inc Ltd

Coventry

On-site

GBP 26,000 - 32,000

Full time

2 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Rotating shift pattern
Hourly rate £19–£23
Full-time, permanent
Mazak machinery experience

Job summary

Optima UK Inc Ltd in Exhall, Coventry, is seeking an experienced CNC Machinist to operate Mazak CNC machine tools with Smooth controller. The role requires reading engineering drawings, setting up tooling and ensuring parts meet tight tolerances in a high-precision environment.

The successful candidate will contribute to production through quality inspections, process monitoring and collaborative teamwork, while adhering to safety and cleanliness standards within a rotating shift pattern.

Qualifications

  • Experience operating Mazak CNC machine tools in a precision manufacturing setting.
  • Experience using the Mazak Smooth controller.
  • Ability to read and interpret engineering drawings and tolerances.
  • Knowledge of tooling, workholding, offsets and machining parameters.
  • Competent with precision measuring equipment and inspection procedures.
  • Strong focus on health & safety, quality and attention to detail.

Responsibilities

  • Set up and operate Mazak CNC machine tools, including turning and machining-centre equipment.
  • Load/unload components, verify part, material, tooling and programme before machining.
  • Monitor cycles, respond to alarms and wear; adjust within authorised limits.
  • Read engineering drawings and program numbers; edit programmes as needed.
  • Carry out first-off, in-process and final inspections; record results.

Skills

Mazak CNC
Mazak Smooth controller
Engineering drawings
Tooling
Workholding
Precision measuring
Health & Safety
Record keeping

Education

CNC machining apprenticeship

Tools

Mazatrol
ISO/G-code

Job description

CNC Machinist - Mazak (Smooth Controller)

Location: Exhall, Coventry, CV7 9FT

Salary: £19.00 - £23.00 per hour (depending on experience)

Hours: Rotating weekly shift pattern

Employment Type: Full Time / Permanent

About the Opportunity

We are recruiting an experienced CNC Machinist to join an established engineering and manufacturing business based in Exhall, Coventry.

This is an excellent opportunity for a skilled CNC machinist with hands‑on experience operating Mazak machinery and using the Mazak Smooth controller within a precision engineering environment.

The successful candidate will have a strong understanding of machining processes, tooling, workholding and quality inspection, with the ability to work independently while maintaining high standards of safety, accuracy and productivity.

The Role

You will be responsible for setting up and operating Mazak CNC machine tools, ensuring components are manufactured accurately and efficiently in line with engineering drawings and production requirements.

Working with Mazak Smooth controls, you will monitor machining processes, make authorised adjustments, carry out quality inspections and work closely with production and engineering teams to maintain manufacturing standards.

Key Responsibilities
Machine Operation & Set‑Up
  • Set up and operate Mazak CNC machine tools, including turning and machining‑centre equipment.
  • Safely load and unload components, checking the correct part, material, tooling and programme before machining.
  • Monitor machine cycles and respond to alarms, tool wear and abnormal operating conditions.
  • Carry out tool changes and routine adjustments within authorised limits.
CNC Programmes & Process Control
  • Read and interpret engineering drawings, route cards, setup sheets and technical specifications.
  • Understand Mazatrol and/or applicable ISO/G-code programmes.
  • Make authorised programme edits and tooling offset adjustments where competent.
  • Check programme numbers, revisions and work offsets before starting production.
  • Escalate programme, tooling or machining issues requiring engineering support.
Quality & Inspection
  • Use precision measuring equipment, including micrometers, verniers, bore gauges and height gauges.
  • Carry out first‑off, in‑process and final inspections in line with quality requirements.
  • Accurately record inspection results and maintain production traceability.
  • Identify, segregate and report non‑conforming components.
  • Support root‑cause investigations and corrective actions where required.
Safety, Maintenance & Housekeeping
  • Follow all site Health & Safety, environmental and quality procedures.
  • Maintain machine guarding and follow safe isolation procedures.
  • Carry out routine machine cleaning, operator care and maintenance checks.
  • Maintain a clean and organised working environment.
  • Handle swarf, coolant, oils and materials in accordance with site procedures.
Performance & Teamwork
  • Work towards production targets for output, cycle times, scrap and rework.
  • Report machine downtime, recurring faults, tooling issues and material shortages.
  • Work collaboratively with production, engineering, quality, maintenance and planning teams.
  • Contribute to 5S, continuous improvement and manufacturing efficiency initiatives.
  • Share knowledge and support the development of colleagues where appropriate.
The Ideal Candidate

Essential Skills & Experience:

Essential Skills & Experience
  • Demonstrable experience operating Mazak CNC machine tools within a precision manufacturing environment.
  • Experience using the Mazak Smooth controller.
  • Ability to interpret engineering drawings, tolerances and machining instructions.
  • Good understanding of tooling, workholding, offsets, tool wear and machining parameters.
  • Competent using precision measuring equipment and following inspection procedures.
  • Strong focus on Health & Safety, quality and attention to detail.
  • Accurate record-keeping skills.
  • Reliable, organised and able to work independently as well as part of a team.

Desirable Skills:

Desirable Skills
  • Experience with Mazatrol controls and/or ISO/G-code programming.
  • Experience of CNC turning, milling or multi‑tasking machines.
  • Experience with Mazak i‑Series multi‑tasking machines.
  • Recognised CNC machining qualification or engineering apprenticeship.
  • Knowledge of 5S, TPM and lean manufacturing principles.
  • Experience of structured problem‑solving and continuous improvement.
  • Previous experience working to demanding aerospace, automotive or similar quality standards.
Working Hours

The role operates on a rotating weekly shift pattern:

  • Week 1 - Days (37 hours)
  • Monday to Thursday: 7.00am - 3.30pm
  • Friday: 7.00am - 12.00pm
  • Week 2 - Nights (46 hours)
  • Monday to Thursday: 6.15pm - 6.15am

The shift pattern rotates weekly between days and nights.

What's on Offer
  • Hourly rate of £19.00 - £23.00, depending on experience.
  • Full-time, permanent position.
  • Rotating weekly shift pattern.
  • Opportunity to work with Mazak CNC machinery in a precision engineering environment.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mazak Machine Technician x2 - Nasmyth Coventry Ltd
Mazak Machine Technician x2 - Nasmyth Coventry Ltd

Nasmyth Group • Coventry

On-site
GBP 26,000 - 32,000
5 Weeks Annual Leave
Company Pension
On site parking
Manufacturing Technician - Mazak
Manufacturing Technician - Mazak

Career Makers Inc. • West Kirby

On-site
GBP 35,000 - 48,000
Pension plan
Life assurance
Ride to work
+4
Cnc Setter Operator
Cnc Setter Operator

South West Recruitment • Poole

On-site
GBP 32,000 - 45,000
25 days holiday
8% pension
Death in Service (5x)
+6
Mazak CNC Machinist - Smooth Controller (Rotating Shifts)
Mazak CNC Machinist - Smooth Controller (Rotating Shifts)

Optima UK Inc Ltd • Coventry

On-site
GBP 26,000 - 32,000
Rotating shift pattern
Hourly rate £19–£23
Full-time, permanent
+1
CNC Miller Setter Operator
CNC Miller Setter Operator

Workforce Recruitment and Training • Bilston

On-site
GBP 15,000 - 25,000
4% pension contribution
Death-in-service: 2x salary
Early finish every Friday
+2
CNC Machinist | Mazak / Mazatrol
CNC Machinist | Mazak / Mazatrol

Found Recruitment Solutions Ltd • Storrington

On-site
GBP 32,000 - 45,000
Mazatrol CNC Machinist (Weekend Shift)
Mazatrol CNC Machinist (Weekend Shift)

Morson Edge • Langstone

On-site
GBP 17,000 - 25,000
Accommodation
CNC Setter /Operator
CNC Setter /Operator

Prime Appointments Ltd • Essex

On-site
GBP 30,000 - 37,000
Health Care Cash Plan
Contributory Pension Scheme
Employee Assistance Programme
+5
CNC Machinist - Mazak
CNC Machinist - Mazak

AMETEK Inc. • Leicester Forest East

Remote
GBP 42,000 - 65,000
1pm Friday finish
25 days holiday including Christmas
Life assurance
+5
CNC Machinist - Turning
CNC Machinist - Turning

Hawk 3 • Tewkesbury

On-site
GBP 24,000 - 40,000