Battery Test & Diagnostics Engineer

Contechs

England

On-site

GBP 77,000 - 100,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Contechs Consulting Limited is seeking a Battery Test & Diagnostics Engineer to support HV battery and power-system commissioning, diagnostics and fault resolution on contract in Banbury, Oxfordshire.

The role involves hands-on testing during PEOL/EOL phases, isolating complex failures and driving corrective actions across battery hardware, BMS, and test systems. Relevant HV safety training and practical fault-injection experience are essential.

Qualifications

  • Hands-on experience with HV battery packs, BMS and EV energy-storage systems.
  • Ability to fault-find complex electrical/system issues and perform root-cause analysis.
  • Understanding of battery pack architecture, HV safety and fault/protection strategies.

Responsibilities

  • Diagnose HV battery pack, BMS and power-system faults including contac­tors, pre-charge and HVIL.
  • Interpret wiring diagrams, CAN/XCP logs, diagnostic codes and DAQ data to locate faults.
  • Lead systematic fault investigations from hypothesis to corrective action and verification.

Skills

HV battery packs
BMS fault diagnosis
Diagnostics & testing
CAN/XCP analysis
Root-cause analysis

Education

Electrical Engineering Degree

Tools

Vector CANoe
CANalyzer
CANape
Oscilloscope

Job description

Position Title: Battery Test & Diagnostics Engineer

Duration: Contract

Location: Banbury, Oxfordshire.

  • Our Client is seeking a technically capable Battery Test & Diagnostics Engineer to support high-voltage battery and power-system commissioning, diagnostics, validation and engineering fault resolution.
  • This hands-on role supports prototype and production build phases, with PEOL/EOL testing providing the environment for proactive engineering investigation rather than routine test execution alone.
  • The engineer will independently isolate complex failures, test engineering hypotheses and drive corrective action across battery hardware, BMS, electrical interfaces and test systems.

Key Responsibilities:

  • Diagnose HV battery pack, BMS and power-system faults covering contactors, pre-charge circuits, HVIL, insulation monitoring, voltage/current sensing, thermal management and control interfaces.
  • Interpret electrical schematics, CAN/XCP logs, diagnostic codes, oscilloscope traces and DAQ measurements to isolate hardware, software, calibration, network or test-equipment faults.
  • Own systematic fault investigations from symptom reproduction and hypothesis development through root cause confirmation, corrective action and verification of resolution.
  • Apply structured RCA methods including 5 Whys, 8D and fault-tree analysis; investigate intermittent, repeatable and operating-condition-dependent failures.
  • Develop and perform controlled fault-injection and abnormal-condition tests to verify BMS diagnostics, fault detection thresholds, protective actions, interlocks and recovery behaviour.
  • Use approved risk assessments, authorised equipment and safe test methods for all HV and fault-injection activities.
  • Execute and technically assess PEOL/EOL commissioning and performance tests; investigate failed results rather than simply repeat or reset test sequences.
  • Distinguish genuine product failures from false failures, test-rig limitations, incorrect limits, communications faults and calibration issues.
  • Analyse trends in test data, identify recurring defects and recommend improvements to test coverage, test limits, diagnostic methods and production robustness.
  • Develop or adapt diagnostic routines, test scripts, data acquisition and engineering test procedures to support investigation and validation.
  • Work with battery design, BMS software, validation and manufacturing engineering teams to agree engineering fixes and verify their effectiveness.
  • Produce clear test evidence, technical investigation reports, root-cause findings and practical recommendations; proactively elevate safety or delivery risks.

Key Requirements:

  • Strong hands-on engineering experience with HV battery packs, battery management systems or closely related EV energy-storage and power systems.
  • Proven ability to independently fault-find complex electrical, electronic and system-level issues and deliver evidence-based root cause analysis.
  • Sound understanding of battery pack architecture, contactors, pre-charge, HVIL, insulation monitoring, sensors and BMS fault/protection strategies.
  • Practical experience in fault injection, diagnostic validation, abnormal-condition testing or equivalent controlled fault simulation.
  • Competence interpreting wiring diagrams, electrical schematics, system architectures, CAN signals and diagnostic data.
  • Experience using oscilloscopes, multimeters, DAQ systems and CAN/XCP tools such as Vector CANoe, CANalyzer or CANape.
  • Ability to analyse data, develop diagnostic hypotheses, challenge test outcomes and independently drive technical problems to closure.
  • Formal HV training, safe-isolation competence and disciplined adherence to HV safety procedures and risk controls.
  • Degree, HND or equivalent relevant experience in Electrical, Electronic, Automotive, Mechatronics or Systems Engineering.

Tools & Knowledge (Desirable):

  • Lithium-ion battery module/pack validation, thermal management and BMS calibration experience.
  • PEOL/EOL test development and engineering support in prototype, low-volume or production EV environments.
  • Test scripting and automation using Python, MATLAB, LabVIEW or similar tools.
  • Knowledge of DFMEA, DVP&R, fault coverage, diagnostic thresholds and software/hardware integration.

Candidate Profile:

  • A proactive, technically inquisitive engineer who does not stop when an EOL test reports a failure.
  • The successful candidate can explain why the system failed, safely reproduce and isolate the issue, establish the root cause and drive an effective engineering resolution.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Battery Test & Diagnostics Engineer
Battery Test & Diagnostics Engineer

Contechs • Banbury

On-site
GBP 50,000 - 70,000
Battery Test & Diagnostics Engineer
Battery Test & Diagnostics Engineer

Contechs Consulting • Banbury

On-site
GBP 55,000 - 75,000
HV Battery Test & Diagnostics Engineer
HV Battery Test & Diagnostics Engineer

Contechs Consulting Limited • Banbury

On-site
GBP 50,000 - 70,000
High-Voltage Battery Test & Diagnostics Engineer
High-Voltage Battery Test & Diagnostics Engineer

Contechs • England

On-site
GBP 77,000 - 100,000
Battery Engineer
Battery Engineer

Expleo Group • Coventry, Gaydon

On-site
GBP 40,000 - 65,000
Battery Test Technician
Battery Test Technician

Contechs • Banbury

On-site
GBP 28,000 - 36,000
Battery Test Technician
Battery Test Technician

Contechs Consulting • Banbury

On-site
GBP 32,000 - 42,000
Battery Test Technician in Banbury
Battery Test Technician in Banbury

Energy Jobline CVL • Banbury

On-site
GBP 33,000 - 48,000
Battery Engineer
Battery Engineer

Baker and Baker Recruitment Limited • Southam CP

On-site
GBP 41,000 - 50,000
HV Battery Test & Diagnostics Engineer (Contract)
HV Battery Test & Diagnostics Engineer (Contract)

Contechs Consulting • Banbury

On-site
GBP 55,000 - 75,000