Design Release Engineer (DRE) – HVAC Airflow Loop (Fuel & Thermal Integration)

Segula Technologies

Courbevoie

On-site

MXN 600,000 - 900,000

Full time

6 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Segula Technologies seeks a Design Release Engineer (DRE) for HVAC Airflow Loop to own end-to-end design, packaging, development, validation, and production release of cabin and underhood airflow components. You will interface with Tier-1 suppliers, CAE teams, Fuel Systems, and Vehicle Packaging to meet NVH, thermal, and program milestones.

The role emphasizes cross-functional collaboration, on-site launch support, DFMEA/DVP&R execution, and ensuring thermal/airflow performance without impacting

Qualifications

  • Bachelor-level engineering degree required in Mechanical/Aerospace/Automotive or closely related field.
  • MS degree preferred with focus on fluids/thermodynamics/heat transfer or automotive engineering.

Responsibilities

  • Lead the design, 3D CAD packaging, tooling kick-off, and production release of HVAC airflow loop components.
  • Partner with Thermal/CFD CAE teams to optimize airflow velocity, pressure drop, and thermal shielding.
  • Translate vehicle HVAC performance, NVH, water management, and evaporative proximity standards into CTS/STS.
  • Manage Tier-1 suppliers from sourcing through EDR, tooling readiness, and PPAP milestones.
  • Author, maintain, and execute DFMEA, DVP&R, and GD&T stack-ups.
  • Provide on-site engineering support at plants, wind tunnels, and proving grounds.
  • Lead structured problem-solving (8D, Shainin Red X, 3L5Y) for issues.

Skills

3D CAD
Siemens NX
Teamcenter
Packaging studies
Cross-functional collaboration

Education

Bachelor of Science in Mechanical Engineering, Aerospace Engineering, or Automotive Engineering
Master of Science in Mechanical Engineering (fluids/thermodynamics/heat transfer)

Tools

Siemens NX
Teamcenter

Job description

Job Overview

The Design Release Engineer (DRE) – HVAC Airflow Loop (Fuel & Thermal Integration) is responsible for the end-to-end design, packaging, development, validation, and production release of cabin and underhood airflow distribution components specifically focusing on intake ducts, air distribution plenums, exhauster vents, and thermal isolation pathways that interface with fuel system routing and evaporative emissions architecture. Acting as the primary technical interface between Tier-1 suppliers, Aerodynamics/Thermal CAE, Fuel Systems, and Vehicle Packaging teams, you will ensure all airflow loop components meet Stellantis NVH, thermal management, cabin air quality, packaging, and program milestone targets.

The Design Release Engineer (DRE) – HVAC Airflow Loop (Fuel & Thermal Integration) is responsible for the end-to-end design, packaging, development, validation, and production release of cabin and underhood airflow distribution components specifically focusing on intake ducts, air distribution plenums, exhauster vents, and thermal isolation pathways that interface with fuel system routing and evaporative emissions architecture. Acting as the primary technical interface between Tier-1 suppliers, Aerodynamics/Thermal CAE, Fuel Systems, and Vehicle Packaging teams, you will ensure all airflow loop components meet Stellantis NVH, thermal management, cabin air quality, packaging, and program milestone targets.

Key Responsibilities
  • Component & Subsystem Ownership: Lead the design, 3D CAD packaging, tooling kick-off, and production release of HVAC airflow loop components (air intake plenums, defroster/floor/panel ducts, cowl screens, and pressure-relief exhausters) while maintaining required thermal and physical clearances to fuel lines, vapor canisters, and tank assemblies.
  • Thermal & Airflow Integration: Partner with Thermal/CFD CAE teams to optimize airflow velocity, pressure drop, and thermal shielding so cabin and underhood air paths do not negatively impact fuel tank thermal loads or evaporative vapor generation.
  • Requirements & Architecture: Translate vehicle-level HVAC performance, NVH (airflow whistle/rumble), water management, and fuel/evaporative proximity standards into detailed component Technical Specifications (CTS/STS).
  • Supplier Management: Manage Tier-1 suppliers from sourcing through Engineering Design Reviews (EDR), tooling readiness, and Production Part Approval Process (PPAP) milestones.
  • Quality & Reliability Engineering: Author, maintain, and execute Design Failure Mode & Effects Analyses (DFMEA), Design Verification Plans & Reports (DVP&R), and Geometric Dimensioning & Tolerancing (GD&T) stack-ups.
  • Build & Launch Support: Provide on-site engineering support at assembly plants, climatic wind tunnels, and proving grounds during prototype builds, pilot runs, and vehicle launch.
  • Root Cause & Warranty Resolution: Lead structured problem-solving initiatives (8D, Shainin Red X, 3L5Y) to resolve assembly fitment issues, airflow leaks, NVH concerns, and post-launch warranty claims.
Education Requirements
  • Required (Basic Qualification): Bachelor of Science (B.S.) degree in Mechanical Engineering, Aerospace Engineering, Automotive Engineering, or a closely related engineering discipline from an accredited institution (ABET or equivalent).
  • Preferred Qualification: Master of Science (M.S.) degree in Mechanical Engineering (with focus on Fluid Mechanics, Thermodynamics, or Heat Transfer) or Automotive Engineering.
Basic Qualifications
  • Experience: Minimum of 3–5+ years of automotive engineering experience in HVAC airflow distribution, thermal management, underbody/underhood packaging, or fuel systems integration. (Note: Adjust to 5–8+ years if hiring for a Senior/Lead DRE level).
  • Technical Knowledge: Strong understanding of fluid dynamics, pressure-drop optimization, plastic injection/blow-molding manufacturing processes, foam/elastomer sealing, and underbody thermal shielding.
  • Engineering Tooling: Proficiency in 3D CAD and PLM environments (specifically Siemens NX and Teamcenter) for packaging studies, clearance checks, and tolerance stack-ups.
  • Soft Skills: Strong cross-functional collaboration, supplier management, and communication skills with the ability to manage multiple vehicle programs simultaneously.
Preferred Qualifications
  • Direct experience releasing automotive HVAC ducting, cowl air inlets, cabin exhausters, or underbody thermal/fuel routing interfaces.
  • Working familiarity with CFD airflow/thermal simulation interpretation, climatic wind tunnel testing, and acoustic/NVH airflow testing.
  • Experience with Stellantis engineering systems (e.g., EBOM, CoDeP, PRAS/GIMS, NX/Teamcenter) and warranty databases.
  • Design for Six Sigma (DFSS) Green/Black Belt or Shainin Red X certification.

SEGULA Technologies is a global engineering group, boosting the competitiveness of all major industrial sectors: automotive, aerospace, energy, rail, naval, life sciences, and telecoms. With a presence in more than 30 countries and 140 locations worldwide, the Group prioritizes close relationships with its clients, driven by the expertise of its 15,000 employees. As a leading engineering player putting innovation at the heart of its strategy, SEGULA Technologies manages large-scale projects, ranging from initial studies to industrialization and production. SEGULA TECHNOLOGIES is dedicated to gender balance and diversity, recognizing and recruiting talent of all backgrounds.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mechatronics Design Release Engineer (DRE)
Mechatronics Design Release Engineer (DRE)

Segula Technologies • Courbevoie

On-site
MXN 800,000 - 1,100,000
HVAC Airflow Release Engineer – Thermal & Fuel Integration
HVAC Airflow Release Engineer – Thermal & Fuel Integration

Segula Technologies • Courbevoie

On-site
MXN 600,000 - 900,000
PRODUCT REACTIVE QUALITY
PRODUCT REACTIVE QUALITY

Stellantis NV • Poissy

On-site
EUR 90,000 - 135,000
Hardware Design Architect
Hardware Design Architect

Stellantis NV • Paris

On-site
EUR 120,000 - 190,000
Electric & Electronics Validation Project Leader - Belchamp M/F
Electric & Electronics Validation Project Leader - Belchamp M/F

Stellantis NV • Bourgogne-Franche-Comté

On-site
EUR 75,000 - 110,000
Thermal Principal Engineer in , us
Thermal Principal Engineer in , us

Energy Jobline ATTB • Île-de-France

On-site
EUR 149,000 - 205,000
Senior Principal Engineer-Thermal Controls Strategy and Architecture in , us
Senior Principal Engineer-Thermal Controls Strategy and Architecture in , us

Energy Jobline ATTB • Théméricourt

On-site
EUR 60,000 - 90,000
Mechanical/Thermal Principal Engineer-Data Center IT Rack Solutions in , us
Mechanical/Thermal Principal Engineer-Data Center IT Rack Solutions in , us

Energy Jobline ATTB • Théméricourt

On-site
EUR 137,000 - 189,000
Pilote Convergence Conformité Produit / Process H/F
Pilote Convergence Conformité Produit / Process H/F

Segula Technologies • Colmesnil-Manneville

On-site
EUR 42,000 - 62,000
RTT
Carte Swile
Mutuelle / prévoyance
+1
Ingénieur Conception de composants fluides Moteur H/ F
Ingénieur Conception de composants fluides Moteur H/ F

Segula Technologies • Saint-Priest

On-site
EUR 55,000 - 75,000