Inverter Control & Firmware Engineer (d/f/m)

TK Elevator GmbH

Móstoles

Remoto

EUR 65.000 - 95.000

Tempo integral

Há 2 dias
Seja uma das primeiras pessoas a se candidatar

Receba uma resposta desta empresa empregadora

Seu currículo e carta de apresentação personalizados exatamente para o que estão contratando.

Passe pelos filtros ATS

Benefícios oferecidos por esta vaga

Health & safety
Flexible working hours
Diversity & inclusion
Training & development
Creative environment
Sustainability
Modern workplace facilities

Resumo da vaga

TK Elevator GmbH is seeking an engineer to translate elevator drive requirements into robust control architectures and firmware. You will design and tune current, torque and speed control for induction and permanent-magnet motors, and model these systems using MATLAB/Simulink or PLECS.

You will implement deterministic firmware on real-time MCU/DSP platforms and validate performance on test rigs. You will work with hardware, controls and firmware teams across Spain (Mostoles) and Germany

Qualificações

  • Degree in Electrical, Industrial, Electronics, Automation or comparable discipline.
  • Strong foundations in control theory, signal processing, power electronics, electrical machines and motor-drive dynamics.
  • Practical experience with motor-control algorithms (FOC, PWM, current/torque/speed regulation), modelling and real-time implementation.
  • Knowledge of MATLAB/Simulink or PLECS, model-based development, automatic code generation and embedded C/C++.
  • Experience with MCU/DSP platforms, ADC/PWM, interrupts, timing, numerical robustness and lab inverter-motor testing.
  • Ability to work across hardware, controls and firmware teams and communicate in English; HIL, elevator drives, CAN or IEC 61800/EN 81 are valued.

Responsabilidades

  • Translate elevator drive requirements into control architecture, algorithms, interfaces and acceptance criteria, considering motor-inverter dynamics.
  • Design and tune current, torque and speed control for induction and permanent-magnet motors, including PWM, estimation and fault response.
  • Model and simulate motors, inverters and control loops using MATLAB/Simulink, PLECS or equivalent, supporting MIL/SIL/HIL verification.
  • Implement control firmware in embedded C/C++ or automatically generated code on real-time MCU/DSP platforms, ensuring deterministic execution.
  • Integrate sensing, ADC/PWM synchronization, feedback, communications and protections, considering DC-link, regeneration, power-stage and thermal limits.
  • Validate inverter-motor performance on test rigs and elevator prototypes, diagnose hardware/control issues and coordinate solutions with multidisciplinary teams.

Conhecimentos

Control theory
Motor-drive dynamics
FOC & PWM
Real-time implementation
English communication

Formação

Electrical/Industrial/Electronics/Automation degree or comparable

Ferramentas

MATLAB/Simulink
PLECS
Embedded C/C++
MCU/DSP platforms

Descrição da vaga

  • You translate elevator drive requirements into control architecture, algorithms, interfaces and acceptance criteria, considering motor-inverter dynamics.
  • You design and tune current, torque and speed control for induction and permanent-magnet motors, including PWM, estimation and fault response.
  • You model and simulate motors, inverters and control loops using MATLAB/Simulink, PLECS or equivalent, supporting MIL/SIL/HIL verification.
  • You implement control firmware in embedded C/C++ or automatically generated code on real-time MCU/DSP platforms, ensuring deterministic execution.
  • You integrate sensing, ADC/PWM synchronization, feedback, communications and protections, considering DC-link, regeneration, power-stage and thermal limits.
  • You validate inverter-motor performance on test rigs and elevator prototypes, diagnose hardware/control issues and coordinate solutions with multidisciplinary teams.
What We Expect
  • You translate elevator drive requirements into control architecture, algorithms, interfaces and acceptance criteria, considering motor-inverter dynamics.
  • You design and tune current, torque and speed control for induction and permanent-magnet motors, including PWM, estimation and fault response.
  • You model and simulate motors, inverters and control loops using MATLAB/Simulink, PLECS or equivalent, supporting MIL/SIL/HIL verification.
  • You implement control firmware in embedded C/C++ or automatically generated code on real-time MCU/DSP platforms, ensuring deterministic execution.
  • You integrate sensing, ADC/PWM synchronization, feedback, communications and protections, considering DC-link, regeneration, power-stage and thermal limits.
  • You validate inverter-motor performance on test rigs and elevator prototypes, diagnose hardware/control issues and coordinate solutions with multidisciplinary teams.
Who we are looking for
  • Degree in Electrical, Industrial, Electronics, Automation or Control Engineering, or a comparable discipline.
  • Strong foundations in control theory, signal processing, power electronics, electrical machines and motor-drive dynamics.
  • Practical experience with motor-control algorithms (FOC, PWM, current/torque/speed regulation), modelling and real-time implementation.
  • Knowledge of MATLAB/Simulink or PLECS, model-based development, automatic code generation and embedded C/C++.
  • Experience with MCU/DSP platforms, ADC/PWM, interrupts, timing, numerical robustness and laboratory inverter-motor testing.
  • Ability to work across hardware, controls and firmware teams and communicate in English; HIL, elevator drives, CAN or IEC 61800/EN 81 are valued.

This position can be filled in Spain (Mostoles) or Germany (Esslingen).

What We Offer
  • Health and Safety -Highest standards and a wide range of health promotion and healthcare activities
  • Flexibility -We support, for example, through flexible yet regulated working hours and remote working options
  • Collaboration & diversity -Collegiality is of huge importance – we treat everyone with respect and appreciation
  • Development -Individual support to help you get started in your new job as well as training and education programs to help you develop professionally and personally
  • Creative leeway -We offer an environment in which you can try out new solutions in a no-blame-culture
  • Sustainability -We act with responsibility and environmental awareness
  • Work environment -We have modern workplaces and IT equipment, subsidized lunchtime meals in the canteen, free parking and discounted public transport tickets
Who we are

We strive to make cities the best ever places to live, by advancing an industry that moves over 1 billion people each day. We are transforming our business by driving the industry norm and challenging ourselves, fostering a culture of internal and external collaboration, and building on our unique engineering capabilities to optimize existing and create new products and solutions for our customers that cater to real mobility needs.

TK Elevator (TKE) is a global leader in vertical transportation and urban mobility. We provide engineering that keeps the world moving, including design, installation, and maintenance of elevators, escalators, walkways, lifts, passenger boarding bridges, stairlifts, platform lifts and home elevators - including multi-brand modernization and service any place, any time. With TK Elevator's AI and digital solutions there are no longer any limits to urban mobility. TK Elevator became independent following its separation from the thyssenkrupp group in 2020. The company achieved sales of €9.2 billion in fiscal year 2024/2025. With around 50,000 employees, 25,000 service technicians and over 1,000 support centers globally, we are moved by what moves people. TKE - Move Beyond.

Obtenha sua revisão de currículo grátis e confidencial.

ou arraste e solte seu arquivo aqui.

Similar jobs

Vagas similares que valem a pena comparar

Junior Electronics / SW Engineer (d/f/m)
Junior Electronics / SW Engineer (d/f/m)

TK Elevator GmbH • Gijón

Presencial
EUR 42.000 - 66.000
Health & safety
Flexible hours
Remote work options
+4
Senior Test & Qualification Engineer (d/f/m)
Senior Test & Qualification Engineer (d/f/m)

TK Elevator GmbH • Gijón

Presencial
EUR 42.000 - 64.000
Health and Safety
Flexibility
Collaboration & diversity
+4
Backend Developer (d/f/m)
Backend Developer (d/f/m)

TK Elevator GmbH • Móstoles

Híbrido
EUR 55.000 - 75.000
Health and Safety
Flexible hours & remote
Collaborative culture
+3
(Senior) Global Product Owner – E2E IoT Solutions (d/f/m)
(Senior) Global Product Owner – E2E IoT Solutions (d/f/m)

TK Elevator GmbH • Madrid

Híbrido
EUR 90.000 - 120.000
Health & safety
Flexible working hours
Diversity & collaboration
+4
Senior Technical Product Owner – Embedded Components and Devices - Digital Emergency Services (DES) (d/f/m)
Senior Technical Product Owner – Embedded Components and Devices - Digital Emergency Services (DES) (d/f/m)

TK Elevator GmbH • Madrid

Híbrido
EUR 70.000 - 95.000
Remote working options
Flexible working hours
Health promotion and healthcare
+3
App Developer (d/f/m)
App Developer (d/f/m)

TK Elevator GmbH • Móstoles

Presencial
EUR 60.000 - 100.000
Health promotion programs
Flexible working hours
Remote working options
+5
Embedded Software Engineer (Application) (d/f/m)
Embedded Software Engineer (Application) (d/f/m)

TK Elevator GmbH • Madrid

Híbrido
EUR 40.000 - 60.000
Health promotion activities
Flexible working hours
Training and education programs
+1
Mechanical Draftsman
Mechanical Draftsman

TK Elevator GmbH • Mieres

Presencial
EUR 28.000 - 36.000
Competitive compensation
Continuous development
Work-life balance
+2
Transformation Lead - Commercial Excellence (d/f/m)
Transformation Lead - Commercial Excellence (d/f/m)

TK Elevator GmbH • Espanha

Presencial
EUR 90.000 - 140.000
Flexible working hours
Remote working options
Competitive compensation
+1
Senior Site Reliability Engineer (d/f/m) TK ELEVATOR IBERICA HOLDING, SL UNIPERSONAL
Senior Site Reliability Engineer (d/f/m) TK ELEVATOR IBERICA HOLDING, SL UNIPERSONAL

TK Elevator • Madrid

Híbrido
EUR 60.000 - 80.000
Health and Safety programs
Flexible working hours
Professional development programs
+2