Sensor Hardware Engineer – Tactile, Audio & Vision (human)

Neura Robotics

Freising

On-site

EUR 70,000 - 100,000

Full time

4 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Job summary

NEURA Robotics is seeking a sensor hardware engineer to own the sensing stack from concept to production release. You will design tactile, acoustic and optical sensors for the humanoid hand, and specify the analog front-ends to deliver accurate measurements.

You will work with electronics, firmware, perception and mechanical engineers to bring sensors up, calibrate them, and hand them to EMS partners for series production. Fluent English is required; German is a strong advantage.

Qualifications

  • Education in electrical engineering or related field.
  • 3+ years with sensor hardware from concept to production.
  • Analog/mixed-signal front-end design and sensor conditioning.
  • Experience with tactile, acoustic or optical modalities preferred.
  • Sensor interfaces and timing protocols (I2S, SPI, I2C, MIPI).
  • Measurement and calibration experience for repeatable results.
  • PCB/flex design experience with compact assemblies.
  • Fluent English; good German is a plus.

Responsibilities

  • Sensor architecture: select and benchmark tactile, acoustic and optical sensors.
  • Design and integrate tactile arrays and force sensing for fingertips, palm and joints.
  • Run measurement campaigns, build fixtures and repeat lab procedures in production.
  • Lead sensor bring-up in the lab and trace issues end-to-end.
  • Design or co-design sensor PCBs and flex assemblies for series production.
  • Firmware collaboration: understand drivers and time-stamping; support data formats.

Skills

Sensor architecture
Tactile sensing
Characterization
Bring-up & debugging
Hardware design
Firmware interface
Fluent English
German knowledge

Education

Degree in Electrical Engineering, Electronics, Mechatronics, Physics or a comparable field

Tools

Altium Designer

Job description

You own the sensing stack, from first signal to production release. NEURA Robotics builds robots that have to feel, hear and see. A large part of that sits in the humanoid hand: tactile sensing in fingertips and palm, force and torque in the joints, all in a space that leaves no room for a comfortable design. Around it come microphone arrays for speech and acoustic events, and camera and depth modules that survive vibration, heat and tight packaging. You take these sensors from concept to a characterized, calibrated, production-released design, together with our electronics, firmware, perception and mechanical engineers.

Your mission & challenges
  • Sensor architecture: You select, specify and benchmark tactile, acoustic and optical sensors against what the robot actually needs: resolution, noise floor, latency, power, cost and supply risk.

  • Tactile and force sensing for the hand: You design and integrate tactile arrays and force/torque sensing for fingertips, palm and joints, including the low-noise analog front-ends behind them. You make sure they fit, mechanically and thermally.

  • Characterization and calibration: You run the measurement campaigns, build the fixtures, and turn your lab procedure into something production can repeat on every unit.

  • Bring-up and debugging: You lead sensor bring-up in the lab and trace problems end-to-end, from a noisy supply rail through the front-end to a perception result that looks wrong.

  • Hardware design and transfer to production: You design or co-design the sensor PCBAs and flex assemblies (depending on the product, both happen here). You own the manufacturing documentation and work with EMS partners and sensor vendors to release them for series production.

  • Firmware and perception interface: Firmware development is not your main job, but you can read it, write enough of it to bring a sensor up, and support the firmware team on drivers, timestamping and synchronization. With perception, you agree on what the data has to look like for their models to work.

What we can look forward to

You know sensors inside out, and you trust measurements over datasheets. You are hands-on, as comfortable with an analog front-end schematic as with a measurement setup, and you treat characterization and calibration as part of the design.

  • Education: Degree in Electrical Engineering, Electronics, Mechatronics, Physics or a comparable field.

  • Experience: 3+ years with sensor hardware, with ownership from concept through characterization to production release.

  • Analog & mixed-signal design: Low-noise front-end design with instrumentation and charge amplifiers, capacitive and bridge conditioning, ADC selection, grounding and shielding.

  • Modalities: Hands-on experience with at least two of the three modalities (tactile/force, audio, vision/depth), and the willingness to own all three.

  • Sensor interfaces & timing: I²S/TDM/PDM, MIPI CSI-2, SPI, I²C, and synchronization across sensors.

  • Measurement in practice: You design the experiment, build the fixture, and know a real effect from a measurement artifact.

  • PCB & flex design: Working knowledge of Altium Designer or comparable tools for compact sensor assemblies.

  • Languages: Fluent English; good German is a strong advantage.

A strong plus:
  • Robotic hands or grippers: Tactile skins, slip detection, sensing in very tight packaging.

  • Acoustics or optics: Arrays, beamforming, anechoic measurement, or lens selection, illumination and depth.

  • Sensors in harsh conditions: Vibration, thermal cycling, cable and flex fatigue.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sensor Hardware Engineer – Tactile, Audio & Vision (Mensch)
Sensor Hardware Engineer – Tactile, Audio & Vision (Mensch)

Neura Robotics • München, Freising

On-site
EUR 70,000 - 110,000
Senior Sensor Engineer (f/m/d)
Senior Sensor Engineer (f/m/d)

TACTILIA robotics • München

On-site
EUR 90,000 - 120,000
Software Support L2 Engineer – Robotic Hands (human)
Software Support L2 Engineer – Robotic Hands (human)

NEURA Robotics • München

On-site
EUR 70,000 - 95,000
Software Support L2 Engineer – Robotic Hands (human)
Software Support L2 Engineer – Robotic Hands (human)

NEURA Robotics • Freising

On-site
EUR 60,000 - 90,000
(Senior) Electronics Engineer, Hardware & Firmware (f/m/d)
(Senior) Electronics Engineer, Hardware & Firmware (f/m/d)

TACTILIA robotics • München

On-site
EUR 70,000 - 110,000
(Senior) Electronics Engineer, Hardware & Firmware (f/m/d)
(Senior) Electronics Engineer, Hardware & Firmware (f/m/d)

Tactiliarobotics • München

On-site
EUR 90,000 - 120,000
Senior Mechatronics Engineer - Humanoid HeadMunich, Limassol
Senior Mechatronics Engineer - Humanoid HeadMunich, Limassol

Vesoma • München

On-site
EUR 90,000 - 130,000
Senior Mechatronics Engineer - Humanoid Head
Senior Mechatronics Engineer - Humanoid Head

Vesoma • München

On-site
EUR 95,000 - 130,000
Software Support L2 Engineer – Robotic Hands (human)
Software Support L2 Engineer – Robotic Hands (human)

Neura Robotics • München

On-site
EUR 65,000 - 90,000
Robotic Perception Expert - Arms (human)
Robotic Perception Expert - Arms (human)

Neura Robotics • Riederich

On-site
EUR 70,000 - 110,000