Senior RF & Radar Front-End Engineer - X-/W-Band Targeting Sensors

Promethion Industries

Berlin

On-site

EUR 110,000 - 160,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Promethion Industries in Berlin seeks a Senior RF & Radar Front-End Engineer to lead rapid prototyping of X-/W-band radar front ends for airborne targeting and relative sensing.

You will design fixed-aperture sensors, dielectric lens-fed apertures, and RF chains, working with mechanical and embedded teams to deliver flight-ready prototypes. The role requires hands-on RF lab work and bench-to-airborne validation.

Qualifications

  • Strong hands-on microwave or mmWave RF engineering
  • Practical experience building and debugging RF front ends
  • Strong understanding of antennas, apertures and complete Tx/Rx signal chains
  • Experience with radar or RF sensing systems beyond simulation
  • Hands-on with RF lab equipment including VNAs, spectrum analyzers, signal generators and power measurement
  • Strong understanding of gain, noise figure, dynamic range, losses, impedance matching and calibration
  • Experience integrating RF transceivers and commercial RF components into working prototypes
  • Ability to translate EM/RF concepts into manufacturable hardware
  • Strong experimental mindset and ability to diagnose RF behaviour
  • Comfortable working across RF, mechanical, embedded and software interfaces

Responsibilities

  • Lead the rapid prototyping of compact X- and W-band radar front ends for airborne targeting applications.
  • Develop and evaluate fixed-aperture / staring radar sensor architectures optimized for compact, SWaP-constrained platforms.
  • Design and prototype dielectric lens-fed apertures, including 3D-manufactured dielectric lens concepts and compact antenna feeds.
  • Develop practical Tx/Rx RF chains using commercial components and evaluation hardware before moving toward custom electronics.
  • Work hands‑on with antennas, waveguides, feeds, LNAs, PAs, filters, mixers, synthesizers, transceivers and RF interconnects.
  • Evaluate the trade‑offs between X-band and W-band for aperture size, angular resolution, integration effort, losses, range performance and manufacturability.
  • Characterize RF performance through simulation, bench measurements and field testing.
  • Own calibration and measurement procedures for RF front ends and complete sensor assemblies.
  • Work closely with mechanical and systems engineers on packaging, thermal management, structural integration and lens geometry.
  • Integrate the radar front end with embedded compute and downstream target‑tracking / sensor‑fusion systems.
  • Move quickly from block diagram to physical prototype and from bench testing to airborne validation.
  • Build the hardware foundation for subsequent custom RF, embedded‑processing and radar‑signal‑processing development.

Skills

Microwave RF engineering
mmWave RF
Antenna design
RF front ends
Dielectric lens-fed apertures
RF measurement calibration
RF transceivers integration
EM/RF concepts to hardware
Embedded interfaces
Laboratory instrumentation (VNAs, SAs)

Job description

About Promethion Industries

Promethion Industries is a European defence technology company building autonomous supremacy systems for aerial and multi-domain operations. We design tightly integrated autonomy stacks in Europe to enable decisive autonomy for NATO-aligned forces, focusing on defensive and counter-system capabilities including anti-UAS and resilient autonomy under contested conditions. Alongside this, our team explores open code libraries and hardware platforms for robotics vision and perception A.I. powered by synthetic data, challenging corner paradigms to make autonomous robotics more accessible.

We are looking for a Senior RF & Radar Front-End Engineer — X-/W-Band Targeting Sensors to lead the rapid development of compact fixed-aperture radar front ends for airborne targeting and relative sensing applications.

Your mission with us
  • Lead the rapid prototyping of compact X- and W-band radar front ends for airborne targeting applications.

  • Develop and evaluate fixed-aperture / staring radar sensor architectures optimized for compact, SWaP-constrained platforms.

  • Design and prototype dielectric lens-fed apertures, including 3D-manufactured dielectric lens concepts and compact antenna feeds.

  • Develop practical Tx/Rx RF chains using commercial components and evaluation hardware before moving toward custom electronics.

  • Work hands‑on with antennas, waveguides, feeds, LNAs, PAs, filters, mixers, synthesizers, transceivers and RF interconnects.

  • Evaluate the trade‑offs between X-band and W-band for aperture size, angular resolution, integration effort, losses, range performance and manufacturability.

  • Characterize RF performance through simulation, bench measurements and field testing.

  • Own calibration and measurement procedures for RF front ends and complete sensor assemblies.

  • Work closely with mechanical and systems engineers on packaging, thermal management, structural integration and lens geometry.

  • Integrate the radar front end with embedded compute and downstream target‑tracking / sensor‑fusion systems.

  • Move quickly from block diagram to physical prototype and from bench testing to airborne validation.

  • Build the hardware foundation for subsequent custom RF, embedded‑processing and radar‑signal‑processing development.

Your contribution to the team (required)
  • Strong hands‑on experience in microwave or mmWave RF engineering.

  • Practical experience building and debugging RF front ends.

  • Strong understanding of antennas, apertures and complete Tx/Rx signal chains.

  • Experience with radar or RF sensing systems beyond simulation‑only work.

  • Hands‑on experience with RF laboratory equipment including VNAs, spectrum analyzers, signal generators and power measurement.

  • Strong understanding of gain, noise figure, dynamic range, losses, impedance matching and calibration.

  • Experience integrating RF transceivers and commercial RF components into working prototypes.

  • Ability to translate EM/RF concepts into manufacturable physical hardware.

  • Strong experimental mindset and ability to diagnose unexpected RF behaviour.

  • Comfortable working across RF, mechanical, embedded and software interfaces.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Lead Systems Engineer - Active RF Sensing
Lead Systems Engineer - Active RF Sensing

EngineersOfAI • München

On-site
EUR 70,000 - 90,000
Senior Radar Firmware Engineer
Senior Radar Firmware Engineer

Xneural GmbH • Dresden

Hybrid
EUR 90,000 - 120,000
RF Engineer - Space Antenna (gn) @ DefenceTech Venture, Munich
RF Engineer - Space Antenna (gn) @ DefenceTech Venture, Munich

atlantic.vc • München

On-site
EUR 90,000 - 150,000
Senior Radar Firmware Engineer Engineering Dresden, Germany
Senior Radar Firmware Engineer Engineering Dresden, Germany

Xneural GmbH • Dresden

On-site
EUR 90,000 - 120,000
Firmware ownership
Radar/Embedded/AI/Cloud work
Direct collaboration
+1
Lead Systems Engineer - Active RF Sensing
Lead Systems Engineer - Active RF Sensing

Helsing • München

On-site
EUR 70,000 - 90,000
Competitive compensation and VSOP options
Relocation support
Social and education allowances
Radar Firmware Engineer Engineering Dresden, Germany
Radar Firmware Engineer Engineering Dresden, Germany

Xneural GmbH • Dresden

On-site
EUR 70,000 - 110,000
Programme Manager - Radar and Fire-Control Systems
Programme Manager - Radar and Fire-Control Systems

Onodrim Industries • München

On-site
EUR 90,000 - 130,000
Radar Modelling & Simulation Engineer
Radar Modelling & Simulation Engineer

Cambridge Aerospace • München

On-site
EUR 90,000 - 130,000
Lead Systems Engineer - Active RF Sensing Market Munich
Lead Systems Engineer - Active RF Sensing Market Munich

helsing.ai • München

On-site
EUR 75,000 - 95,000
Competitive compensation
Relocation support
Social and education allowances
Radar Firmware Engineer
Radar Firmware Engineer

Xneural GmbH • Dresden

On-site
EUR 65,000 - 95,000