FM - Technician Mechanical

Fluor Corporation

Geldern

On-site

EUR 42,000 - 62,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Fluor Corporation in Germany seeks a skilled crafts worker to support rigging, maintenance and mechanical tasks. You will follow health, safety, and environmental requirements, perform cleanup, material handling, and operate hand and power tools as required.

The role involves inspecting rigging equipment, applying basic crane signals, and assisting with setup of metalworking machines. Candidates should follow diagrams and manuals and maintain compliance with safety standards.

Qualifications

  • Understand and follow oral and written work instructions.
  • Work at varying heights and identify safety hazards.
  • Operate equipment and power tools safely.

Responsibilities

  • Follow health, safety, and environmental requirements.
  • Perform cleanup, material handling, and storage duties.
  • Inspect rigging equipment and use common hand tools.
  • Set up and operate metalworking machines and test equipment.

Skills

Safety culture
Rigging basics
Knot tying
Machining understanding

Tools

Lathe
Drill press
Grinder
Pneumatic tools

Job description

At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role.

Job Description

Follow all health, safely, and environmental requirements ; Perform cleanup duties ; Perform material handling and storage duties ; Identify, use, and care of common hand and power tools ; Use and care of craft specific tools and equipment ; Knowledge and application of craft related mathematics ; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware ; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks ; Ensure all certification and training is in accordance with the requirements ; Assists in repairs and maintenance, in accordance with diagrams, sketches, operation manuals, and manufacturer’s specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment using hand tools, power tools, and precision‑measuring and testing instruments ; Observes mechanical devices in operation and listens to their sounds to locate causes of trouble ; Dismantles devices to gain access to and remove defective parts, using hoists, cranes, hand tools, and power tools ; Examines form and texture of parts to detect imperfections ; Inspects used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, and other measuring instruments ; Adjusts functional parts of devices and control instruments, using hand tools, levels, plumb bobs, and straight edges ; May assist with set up and operation of lathe, drill press, grinder, and other metalworking tools to make and repair parts ; Repairs or replaces defective parts, using hand tools, and power tools ; Installs special functional and structural parts in devices using hand tools ; Starts devices to test their performance ; Lubricates and cleans parts ; Repairs and maintains, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment. ; Observes mechanical devices in operation and listens to their sounds to locate causes of trouble. ; Dismantles devices to gain access to and remove defective parts, using hoists, cranes, hand tools, and power tools. ; Examines form and texture of parts to detect imperfections. ; Inspects used parts to determine changes in dimensional requirements, using rules, callipers, micrometers, and other measuring instruments. ; Adjusts functional parts of devices and control instruments, using hand tools, levels, plumb bobs, and straightedges. ; Repairs or replaces defective parts, using hand tools and power tools. ; Installs special functional and structural parts in devices, using hand tools. ; Starts devices to test their performance. ; Lubricates and cleans parts. ; May set up and operate lathe, drill press, grinder, and other metalworking tools to make and repair parts. ; May initiate purchase order for parts and machines. ; Change reverse osmosis membranes. ; Repair leaks. ; Replace pump seals. ; Perform LOTO activities as needed.

Job Requirements
Mental Demands

Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools

Physical Demands

See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks

Working Conditions

Work in extreme heat or cold; Work where noise level is above 85 decibels; Work in wet/humid environment; Work in cramped quarters; Work in environment of fluctuating ventilation; Work inside and outside.

We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law.

Salary is based upon experience. Base Salary:

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Water and Maintenance Technician in Birkenfeld
Water and Maintenance Technician in Birkenfeld

Energy Jobline ZR • Birkenfeld

On-site
EUR 45,000 - 77,000
HVAC Technician 4 - Wiesbaden, Germany
HVAC Technician 4 - Wiesbaden, Germany

M.C. Dean, Inc. • Wiesbaden

On-site
EUR 45,000 - 65,000
Competitive salary
Medical, dental, vision, life and long
Paid time off
+2
Technical Services Personnel
Technical Services Personnel

TechnipFMC • Germany

On-site
EUR 42,000 - 54,000
Electrician, Licensed
Electrician, Licensed

Hollingsworth & Vose • Berlin

On-site
EUR 45,000 - 64,000
Manager, Project Management
Manager, Project Management

FLOWSERVE CORPORATE • Dortmund

On-site
EUR 90,000 - 130,000
Site Manager - Erneuerbare Energien (m/w/d)
Site Manager - Erneuerbare Energien (m/w/d)

Fluence • Erlangen

On-site
EUR 90,000 - 130,000
Electro-Mechanical Technician
Electro-Mechanical Technician

Rogers Corporation • Rauschenhammermühle

On-site
EUR 42,000 - 65,000
Industrial Maintenance Mechanic
Industrial Maintenance Mechanic

Rogers Corporation • Rauschenhammermühle

On-site
EUR 45,000 - 65,000
Reliability Engineer II – Fixed Equipment
Reliability Engineer II – Fixed Equipment

Westlake • Burgkirchen an der Alz

On-site
EUR 50,000 - 70,000
xPL Mechanical Engineer
xPL Mechanical Engineer

Turner Construction Company • Germany

Remote
EUR 60,000 - 80,000