Turbomachinery Engineer

NordSpace Corp.; Markham; Hybrid; CAD 75,000 - 95,000; Full time

Job summary

NordSpace Corp. in Markham, ON seeks a Turbomachinery Engineer to design, analyze, and develop turbopumps and rotating machinery for liquid rocket engines.

You will tackle components spinning at tens of thousands of RPM while pumping cryogenic propellants at extreme pressures, spanning concept to hardware, testing, and failure investigation. The role suits a hands-on, fast-paced environment, with collaboration across disciplines and strong emphasis on CFD/FEA analysis, CAD design, and test

Qualifications

• Bachelor's degree in Aerospace, Mechanical, Nuclear or related engineering; Master’s degree is an asset.
• 3+ years hands-on turbomachinery or rotating equipment design experience.
• Demonstrated experience owning design, analysis, and delivery from concept to hardware.
• Working knowledge of rotordynamics, bearing/seal design, and rotating structural analysis.
• Strong background in fluid dynamics, heat transfer, combustion, and structural mechanics for high pressure/high temperature hardware.
• Proficiency with 3D CAD tools for complex assemblies and GD&T compliant drawings.
• Experience with simulation/analysis tools (FEA, CFD) for structural, thermal and fluid performance.
• Familiarity with high-speed rotating machinery failure modes and design margins.

Responsibilities

• Design and analyze turbopumps for liquid rocket engines.
• Perform rotordynamic analysis, including critical speed prediction and whirl stability.
• Conduct structural analysis (FEA) of rotating and static components.
• Perform/Review CFD analysis of pump and turbine flow paths to optimize efficiency.
• Develop component-level and system-level performance models.
• Select and size bearings, seals, and dampers for cryogenic or hot-gas environments.
• Support hardware fabrication, assembly, and instrumentation planning.
• Support hot-fire and component testing; analyze test data and compare predictions.
• Investigate anomalies and drive root-cause corrective actions.
• Collaborate cross-functionally with other engineering teams.
• Contribute to design reviews, documentation, and requirements verification.
• Work with suppliers on custom hardware procurement.

Skills

Turbomachinery design

Rotordynamics

FEA analysis

CFD analysis

GD&T drawings

3D CAD

Manufacturing support

Education

Bachelor's degree in Aerospace or Mechanical

Master’s degree is an asset

Tools

CAD tools

CFD software

FEA software

Job description

Engineering - Launch Systems Full Time Markham, ON $75,000 - $95,000 CAD per year

NordSpace(https://nordspace.com) is a Canadian startup with the mission to advance life on Earth, from space.NordSpaceis committed to extremely rapid innovation and development of the most ambitious aerospace projects with the most ambitious team. With divisions spanning everything fromspace robotics to satellites torockets,NordSpaceis driven to bring space closer to Earth and inspire generations of space explorers.

Role purpose:

As a Turbomachinery Engineer you will design, analyze, and develop turbopumps and related rotating machinery for liquid rocket engines. You'll work on components that spin at tens of thousands of RPM while pumping cryogenic propellants at extreme pressures, this is one of the most demanding mechanical design challenges in aerospace. This role spans the full lifecycle: concept design, detailed analysis, hardware build, test support, and failure investigation.

The role is idealfor someone who thrives in a fast-paced, hands-on environment and wants to see their designs tested, iterated, and flown.

Core responsibilities

• Design and analyze turbopumps (inducers, impellers, turbines, manifolds) for liquid propellant rocket engines.
• Perform rotordynamic analysis, including critical speed prediction, bearing/seal dynamics, and whirl stability.
• Conduct structural analysis (FEA) of rotating and static components under thermal, pressure, and centrifugal loads.
• Perform/Review CFD analysis of pump and turbine flow paths to optimize efficiency and predict cavitation, stall, and off-design performance.
• Develop component-level and system-level performance models (pump/turbine maps, cycle balance).
• Select and size bearings, seals, and dampers for high-speed cryogenic or hot-gas environments.
• Support hardware fabrication, assembly, and instrumentation planning.
• Support hot-fire and component testing; analyze test data and correlate against predictions.
• Investigate anomalies and failures and drive root-cause corrective actions.
• Collaborate cross-functionally with combustion devices, structures, mechanical, and systems engineering teams.
• Contribute to design reviews, technical documentation, and requirements verification.
• Work closely with suppliers and vendors on custom hardware procurement when needed.

Qualifications

• Bachelor’s degree in Aerospace, Mechanical, Nuclear or a closely related engineering discipline;Master’sdegree is an asset.
• 3+ years ofhands onexperience in turbomachinery, rotating equipment, or fluid machinery design (e.g., gas turbines, high pressure chemical process equipment, combustion systems).
• Demonstrated experience owning design, analysis, and delivery from concept to hardware.
• Working knowledge of rotordynamics, bearing/seal design, and rotating structural analysis.
• Strong background in fluid dynamics, heat transfer, combustion, and structural mechanics as applied to high pressure,high temperaturehardware.
• Proficiencywith 3D CAD tools for complex assemblies and detailedcomponentdesign, and fluency with GD&T compliant engineering drawings.
• Experience with simulation and analysis tools (e.g., FEA, CFD, analytical modeling) for structural, thermal, and fluid performance.
• Familiarity with high-speed rotating machinery failure modes and design margins.
• Experience defining and supporting manufacturing processes for precision hardware (e.g., machining, welding/brazing, additive manufacturing, surface treatments) in a development or production environment, including design for manufacturability and testability.
• Proactive mindset:identifiesblockers (technical, schedule, resource, or process) early and drives them to resolution to keep the program moving.

This posting is for an existing vacancy. Thank you to all who apply. Candidates who are successfully selected for an interview will be notified by email.

Applicants must be legally authorized to work in Canada and able to obtain and maintain a security assessment under the Controlled Goods Program (Defence Production Act) as a condition of their employment.

Compensation will be determined at the Company’s discretion, based on job-related factors, which may include, but are not limited to, relevant knowledge, skills, experience, and education and/or training. NordSpace encourages all qualified applicants to apply, even if the posted salary range does not align with their expectations.

NordSpace is an equal opportunity employer and welcomes applications from all qualified candidates; all hiring decisions are based on merit and job-related qualifications, without discrimination on any ground protected by the Ontario Human Rights Code. Accommodations are available on request at any stage of the selection process — please contact [e-mail] .