Millwright Apprentice

Canada Pump & Power; Fort Saskatchewan; On-site; CAD 25,000 - 34,000; Full time

Job summary

Canada Pump and Power is seeking an Apprentice Millwright Mechanic (1st–4th Year) to join our Fort Saskatchewan maintenance team. The role focuses on inspection, repair, rebuilding, and maintenance of industrial pumps, engines and equipment in a hands‑on setting.

Earn practical skills under experienced tradespeople while contributing to safe, efficient operations. This position is based at our Fort Saskatchewan facility with standard 40-hour weeks and overtime as needed.

Qualifications

• Must be at least 18 years of age.
• High school diploma or equivalent.
• Ability to read, write, speak, and understand English.
• Registered 1st–4th Year Industrial Mechanic (Millwright) Apprentice preferred.
• Candidates with strong mechanical aptitude and relevant hands-on experience may be considered.
• Previous experience with industrial pumps, engines, or machinery is an asset.
• Valid driver’s licence with acceptable driving record.
• Ability to follow technical instructions and work safely under supervision.
• Must report to Canada Pump and Power facility in Fort Saskatchewan, Alberta, 7:30 AM start.

Responsibilities

• Assist with inspection, disassembly, repair, rebuilding and reassembly of industrial pumps and equipment.
• Support preventative and corrective maintenance activities on equipment and assets.
• Learn to identify worn, damaged, or defective components.
• Install and replace bearings, seals, shafts, couplings, gaskets and other components.
• Develop skills in alignment, fitting, measurement and assembly.
• Troubleshoot mechanical issues under guidance of experienced tradespeople.
• Interpret drawings, manuals, specifications and repair procedures.
• Inspect and test repaired equipment to ensure quality and operation.
• Maintain maintenance records and complete work orders.

Skills

Mechanical aptitude

Hands-on experience

Reading/writing English

Education

High school diploma

Tools

Hand tools

Power tools

Job description

Apprentice Millwright Mechanic – Fort Saskatchewan, AB

Canada Pump and Power | Fort Saskatchewan, Alberta

Are you an aspiring Millwright looking to build your skills, gain hands‑on experience, and develop your career in the mechanical trades?

Do you enjoy working with your hands, solving mechanical problems, and learning how different types of equipment operate? Are you looking for an opportunity to work alongside experienced tradespeople while gaining exposure to industrial pumps, engines, and mechanical equipment?

Canada Pump and Power is looking for a motivated Apprentice Millwright Mechanic (1st–4th Year) to join our Maintenance team at our Fort Saskatchewan facility.

This is an excellent opportunity for an apprentice who is eager to learn, takes pride in their work, and wants to develop practical skills in an industrial maintenance environment.

We are looking for someone who brings a positive attitude, strong mechanical aptitude, a willingness to learn, and a commitment to working safely.

Schedule & Location

Schedule: Monday to Friday

Hours: 7:30 AM – 4:00 PM

40 hours per week

Home every night!

Occasional approved overtime may be required based on operational demand.

Occasional field/site work may be required to support equipment maintenance and repairs.

Job Statement

The Apprentice Millwright Mechanic supports the Maintenance team with the inspection, disassembly, repair, rebuilding, and maintenance of industrial pumps, engines, mechanical equipment, and company assets.

Working under the guidance and supervision of experienced Millwrights and Maintenance personnel, the successful candidate will develop their technical knowledge, troubleshooting abilities, and practical trade skills while contributing to the safe and efficient operation of company equipment.

Key areas of performance include safety, willingness to learn, efficiency, effectiveness, and quality workmanship.

Key Responsibilities

Mechanical Maintenance & Repairs

Assist with the inspection, disassembly, repair, rebuilding, and reassembly of industrial pumps and mechanical equipment.

Support preventative and corrective maintenance activities on company equipment and assets.

Learn to identify worn, damaged, or defective mechanical components.

Assist with the installation and replacement of bearings, seals, shafts, couplings, gaskets, and other mechanical components.

Develop skills in mechanical alignment, fitting, measurement, and equipment assembly.

Assist experienced tradespeople with troubleshooting mechanical issues and identifying potential causes of equipment failure.

Learn to interpret mechanical drawings, equipment manuals, specifications, and repair procedures.

Inspect and test repaired equipment to ensure quality and operational requirements are met.

Maintain accurate maintenance records and complete assigned work orders.

Equipment Preparation & Shop Support

Gather, organize, and stage parts, tools, and materials required for maintenance and repair activities.

Assist with safely moving, positioning, and securing equipment and components using appropriate lifting and rigging equipment.

Clean, inspect, and prepare equipment and components for repairs.

Maintain a clean, organized, and safe shop environment.

Properly store tools, equipment, and materials.

Assist with equipment inspections and preparation for deployment to project sites.

Support general shop activities and other maintenance priorities as directed.

Safety & Quality

Follow Canada Pump and Power's Safe Work Procedures, Safe Work Practices, and company safety policies.

Complete Field Level Risk Assessments (FLRAs) and participate in required safety meetings.

Identify and report hazards, unsafe conditions, incidents, and near misses.

Use appropriate personal protective equipment (PPE).

Follow established lockout/tagout procedures and equipment isolation requirements.

Work within assigned competency levels and seek guidance when performing unfamiliar tasks.

Ensure repairs and maintenance activities meet company quality standards.

Participate in training and continuous improvement initiatives.

Willingness to Learn – Demonstrates curiosity, accepts coaching and feedback, asks questions, and actively works toward developing trade knowledge and practical skills.

Mechanical Aptitude – Shows an interest in understanding how mechanical systems operate and enjoys hands‑on troubleshooting, repairs, and equipment assembly.

Action Oriented – Takes initiative, remains productive, and approaches assigned tasks with a positive attitude.

Integrity & Accountability – Demonstrates reliability, honesty, professionalism, and ownership of assigned responsibilities.

Communication – Communicates effectively with supervisors and coworkers, asks questions when clarification is required, and provides updates on assigned work.

Problem Solving – Approaches mechanical challenges logically and develops troubleshooting skills through hands‑on experience and guidance.

Attention to Detail – Takes pride in quality workmanship and follows instructions, measurements, and procedures carefully.

Teamwork – Works collaboratively with experienced tradespeople, Maintenance personnel, and Operations to achieve shared goals.

Safety Conscious – Demonstrates an understanding of workplace hazards and a commitment to following safe work practices.

Requirements

Must be at least 18 years of age.

High school diploma or equivalent.

Ability to read, write, speak, and understand English.

Registered 1st, 2nd, 3rd, or 4th Year Industrial Mechanic (Millwright) Apprentice preferred.

Candidates with strong mechanical aptitude and relevant hands‑on experience who are interested in pursuing a Millwright apprenticeship may also be considered.

Previous experience working with industrial pumps, engines, mechanical equipment, or machinery is considered an asset.

Basic knowledge of hand tools, power tools, and mechanical components.

Ability to follow technical instructions and work safely under supervision.

Valid driver's licence with an acceptable driver's abstract.

Ability to complete required company and site‑specific orientations and training.

Ability to complete required drug and alcohol screening in accordance with company and/or client requirements.

Must be able to reliably report to the Canada Pump and Power facility in Fort Saskatchewan, Alberta, Monday through Friday for a 7:30 AM start.

Willingness to work occasional overtime and attend field/site locations when operationally required.

Primarily based at the Canada Pump and Power maintenance facility in Fort Saskatchewan, Alberta.

Hands‑on shop environment involving industrial pumps, mechanical equipment, tools, and machinery.

Occasional field/site work to support equipment maintenance and repairs.

Exposure to noisy, dusty, wet, and industrial working conditions.

Occasional exposure to adverse weather conditions.

Regular collaboration with Maintenance, Operations, and other company personnel.

Physical Demands

Ability to safely perform physically demanding mechanical work.

Ability to stand, bend, kneel, crouch, and work in various positions throughout the workday.

Ability to safely move around industrial equipment and shop environments.

Ability to lift and handle loads up to approximately 18 kg (40 lbs).

Ability to work extended shifts of up to 12 hours when operationally required.

Reports To

Maintenance Manager

Why Join Canada Pump and Power?

At Canada Pump and Power, you'll have the opportunity to develop your skills in a hands‑on industrial environment where no two days are exactly alike.

Our Maintenance team works with a wide range of industrial equipment supporting pumping, dredging, marine construction, and other specialized operations across Canada.

As an Apprentice Millwright, you'll gain valuable experience working alongside knowledgeable tradespeople, develop your mechanical troubleshooting abilities, and build a strong foundation for your future in the trades.

If you're mechanically inclined, eager to learn, and ready to build your career with a team that values safety, quality, and hard work, we encourage you to apply!