Manual Machinist

Boundary Equipment Co. Ltd.; Port Coquitlam; Presencial; CAD 60.000 - 90.000; Jornada completa

Descripción de la vacante

Bridge Machine, part of the Boundary group, seeks an experienced Manual Machinist for challenging, repair-oriented work on hydraulic and heavy industrial components. You will set up and operate manual lathes and mills, read engineering drawings, and ensure tight tolerances while collaborating with welders and mechanics.

You should bring 5+ years of industrial machining experience, proficiency with precision measuring tools, and the ability to plan setups independently.

Formación

• 5+ years of manual machining experience in industrial, repair, or manufacturing settings.
• Experience operating manual lathes and mills.
• Experience machining large components.
• Knowledge of tolerances, fits, and surface finishes.
• Read and interpret engineering drawings and specs.
• Ability to plan setups and sequences independently.
• Experience with overhead cranes and rigging.
• A Red Seal is an asset.

Responsabilidades

• Set up and operate manual lathes, mills, boring equipment, and other conventional tools.
• Machine components to specified dimensions and tolerances.
• Repair and rebuild hydraulic cylinders and large components.
• Read drawings, specs, and work orders.
• Determine tooling, speeds, feeds, and sequences.
• Inspect parts using micrometers, calipers, bore gauges.
• Maintain a clean, safe work area and document work.

Conocimientos

Manual machining

Lathes

Mills

Hydraulic cylinder repair

Reading drawings

Precision measurement

Overhead cranes

Independent planning

Team collaboration

Quality workmanship

Educación

Red Seal Machinist (asset)

Descripción del empleo

Big Parts. Challenging Repairs. Precision Work That Matters.

Some machinists want to push a button and run the same part all day.

This isn't that job.

At Bridge Machine, we're looking for an experienced Manual Machinist who enjoys challenging work, understands the craft behind machining, and takes pride in figuring out how to repair, restore, and manufacture components properly.

Our work is varied. One day you may be machining a component for a hydraulic cylinder repair; the next, you're working with a large industrial part that requires you to think through the setup, determine the best approach, and work to tight tolerances.

Bridge Machine specializes in machining, hydraulic cylinder repair, manufacturing, and rebuild services for demanding industrial applications.

We're also proud to be part of the Boundary group of companies — a Canadian group of specialized industrial businesses serving the mining, heavy equipment, manufacturing, and resource sectors across Canada and around the world.

If you're a skilled manual machinist who still enjoys the art of machining, we'd like to meet you.

What You'll Do

As a Manual Machinist, you'll work on a variety of repair, rebuild, and manufacturing projects involving hydraulic and heavy industrial components.

You’ll be responsible for:

• Setting up and operating manual lathes, mills, boring equipment, and other conventional machine tools
• Machining new and repair components to specified dimensions and tolerances
• Working with large and heavy industrial components
• Performing machining associated with hydraulic cylinder repair and rebuilding
• Reading and interpreting engineering drawings, sketches, specifications, and work orders
• Determining appropriate setups, tooling, speeds, feeds, and machining sequences
• Measuring and inspecting components throughout the machining process
• Using micrometers, calipers, bore gauges, and other precision measuring equipment
• Working to close tolerances and required surface finishes
• Inspecting existing components to determine wear, damage, and repair requirements
• Troubleshooting machining challenges and determining practical repair solutions
• Working collaboratively with welders, honing machinists, mechanics, and other members of the shop team
• Safely rigging, positioning, and moving components using overhead cranes and material-handling equipment
• Completing required job, production, and inspection documentation
• Performing routine equipment checks and basic preventative maintenance
• Maintaining a clean, organized, and safe work area
• Following Bridge Machine's quality and safety standards

What You Bring

We're looking for someone who knows their way around a manual machine and doesn't need every step of a job laid out for them.

Ideally, you'll bring:

• 5+ years of manual machining experience in an industrial, repair, or manufacturing environment
• Strong experience operating manual lathes and mills
• Experience machining large components is a strong asset
• Hydraulic cylinder repair or heavy industrial machining experience is highly desirable
• Strong understanding of machining principles, tolerances, fits, and surface finishes
• Ability to independently plan machining setups and sequences
• Ability to read and interpret engineering drawings and technical specifications
• Strong competency using precision measuring and inspection equipment
• Mechanical aptitude and practical troubleshooting ability
• Experience safely using overhead cranes and rigging equipment
• Ability to work independently while contributing to a collaborative shop environment
• Strong attention to detail and commitment to quality workmanship

A Red Seal Machinist certification is an asset, but not required. We recognize that some of the strongest manual machinists have built their expertise through years of hands‑on experience.

The Person Who Will Do Well Here

You're a machinist who likes figuring things out.

You understand that repair machining isn't always straightforward. The part in front of you may be worn, damaged, oversized, or unlike anything you worked on yesterday.

You know how to assess the job, develop a setup, choose the right tooling, take accurate measurements, and make adjustments as you go.

You also understand the importance of getting it right.

You take pride in your workmanship, look after your equipment, communicate when something doesn't make sense, and enjoy working with other experienced tradespeople to solve problems.

Why Bridge Machine?

At Bridge Machine, you won't spend every day producing the same part.

You’ll have the opportunity to:

• Work on large, challenging, and varied industrial components
• Perform true manual and repair machining
• Apply your experience and judgment rather than simply following a repetitive process
• Work on hydraulic cylinders and equipment used in demanding industrial environments
• Work alongside experienced machinists and tradespeople
• See projects move through repair and manufacturing from start to finish
• Continue developing specialized heavy machining and repair skills
• Be part of a company backed by the broader Boundary group of companies

Being part of Boundary gives Bridge the strength and opportunities of a growing group of specialized industrial companies while maintaining the hands‑on environment and team culture of a dedicated machine shop.

Join Bridge Machine

If you're an experienced Manual Machinist who enjoys challenging work, takes pride in precision, and wants more variety than repetitive production machining, we want to hear from you.

Bring Your Skill. Bring Your Experience. Bring Your Craftsmanship.