Embedded Hardware Designer

Price Industries Limited

Winnipeg

On-site

CAD 70,000 - 100,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Price Electronics is hiring an Embedded Hardware Designer to own electronic designs from concept through production: schematic capture, PCB layout, board bring-up and low-level driver development. You will use modern test equipment and AI-assisted tools to identify and fix problems.

The role reports to the Hardware Lead within Engineering - Embedded Hardware and requires a proactive, hands-on engineer who can work across firmware, mechanical and test teams.

Qualifications

  • Bachelor's degree or diploma in Electrical, Electronics or Computer Engineering (or equivalent).
  • 2+ years designing embedded hardware with at least one product in volume production.
  • Experience with schematic capture and PCB layout tools.

Responsibilities

  • Schematic development and component selection.
  • PCB layout of 2-8 layer boards with high-speed signals.
  • Drive firmware integration and low-level drivers.
  • Board bring-up, testing and debugging.
  • Support certification and changes with documentation.

Skills

Schematic capture
PCB layout
C programming for MCUs
Debugging with test tools
AI-assisted debugging

Education

Bachelor's degree in Electrical/ Electronics or Computer Engineering

Tools

Altium Designer
KiCad
OrCAD/ Allegro

Job description

Embedded Hardware Designer

Role summary


Price Electronics is hiring an Embedded Hardware Designer to own electronic designs from concept through production: schematic capture, PCB layout, board bring-up, low-level driver development and circuit troubleshooting. You will use modern test equipment and AI-assisted tools to find and fix problems.


Department: Engineering - Embedded Hardware


Reports to: Hardware Lead, Electronics


Employment type: Full-time, permanent


Experience level: Intermediate (2+ years)


Location: Winnipeg, MB (on-site)


Key responsibilities

Schematic development

  • Define system architecture and translate product requirements into block diagrams and detailed schematics.

  • Select components (MCUs, power, sensors, ICs) balancing cost, availability, lifecycle and compliance.

  • Design power supplies, analog front ends, digital interfaces (SPI, I2C, UART, CAN, USB, Ethernet) and wireless circuits.

  • Run design calculations, worst-case and tolerance analysis, and participate in schematic design reviews.


PCB layout design

  • Lay out multilayer boards (2-8 layers), including high-speed, mixed-signal and power sections.

  • Own stack-up definition, impedance control, grounding, thermal management and EMI/EMC mitigation.

  • Apply design for manufacturing, test and assembly (DFM/DFT/DFA) rules; produce Gerbers, BOMs, assembly drawings and fabrication documents.

  • Work with contract manufacturers on panelization, yield issues and engineering changes.


Driver and firmware development

  • Write low-level drivers and board support packages in C for peripherals, sensors and communication interfaces.

  • Bring up new boards: power sequencing, clocks, bootloaders and peripheral verification.

  • Work with firmware engineers on hardware abstraction layers and RTOS or bare-metal integration.


Troubleshooting with test tools and AI

  • Debug circuits using oscilloscopes, logic and protocol analyzers, spectrum analyzers, DMMs, programmable loads and thermal cameras.

  • Use debuggers and in-circuit tools to isolate hardware and firmware faults.

  • Apply AI-assisted tools to speed up root-cause analysis: reviewing schematics and layouts, interpreting waveforms and logs, summarizing datasheets and generating test scripts.

  • Assist in designing automated test fixtures and scripts (Python) for design verification and production test.

  • Document failures, root causes and corrective actions.


Administration and compliance

  • Work with other embedded designers to improve hardware design standards and review checklists.

  • Submit and manage change orders.

  • Work with manufacturing engineers to release assembly instructions.

  • Prepare designs for certification (CSA, UL, CE, FCC) and support pre-compliance testing.

  • Maintain design documentation, revision control and change records.


Required qualifications


  • Bachelor's degree or diploma in Electrical, Electronics or Computer Engineering (or equivalent experience).

  • 2+ years designing embedded hardware, with at least 1 product taken from concept to volume production.

  • Experience in schematic capture and PCB layout with Altium Designer, KiCad, OrCAD/Allegro or similar.

  • Experience with C programming for microcontrollers (ARM Cortex-M, ESP32, STM32, NXP or similar), including register-level driver work.

  • Hands-on skill with oscilloscopes, logic analyzers, spectrum analyzers, DMMs, programmable loads and thermal cameras.

  • Practical use of AI tools in day-to-day engineering.

  • Solid grasp of analog and digital design, power electronics and common serial protocols.

  • Ability to travel in Canada and the United States.


Soft skills

  • Clear technical writing and design-review communication.

  • Methodical, data-driven approach to debugging.

  • Comfortable leading projects.

  • Works well across firmware, mechanical, test and manufacturing teams.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Embedded Software Designer
Embedded Software Designer

Jobgether • Canada

On-site
CAD 100,000 - 150,000
Medical, dental, and vision coverage
RRSP contributions
Profit-sharing bonus
+1
Embedded Developer (Hardware/Firmware Engineer)
Embedded Developer (Hardware/Firmware Engineer)

IQ PARTNERS • London

On-site
CAD 85,000 - 120,000
Senior Electrical Hardware Engineer
Senior Electrical Hardware Engineer

Aversan • Mississauga

Hybrid
CAD 70,000 - 100,000
Electronics Hardware Engineer
Electronics Hardware Engineer

Algo Communication Products Ltd. • Burnaby

On-site
CAD 90,000 - 130,000
Concepteur de cartes électroniques PCB (Intermédiaire)
Concepteur de cartes électroniques PCB (Intermédiaire)

SII Group • Canada

On-site
CAD 90,000 - 115,000
Electronics Hardware Engineer
Electronics Hardware Engineer

Algo Communication Products • Burnaby

On-site
CAD 90,000 - 120,000
Electrical Engineer / Circuit Designer
Electrical Engineer / Circuit Designer

HubSpoke, Inc. • Ottawa

On-site
CAD 85,000 - 110,000
Embedded & Electrical Systems Engineer
Embedded & Electrical Systems Engineer

NordSpace Corp. • Markham

On-site
CAD 90,000 - 105,000
Hardware Engineer - Electrical
Hardware Engineer - Electrical

Lockheed Martin Corporation • Ottawa

On-site
CAD 80,000 - 110,000
Senior Embedded Software Designer
Senior Embedded Software Designer

Go Fractional • Canada

Remote
CAD 120,000 - 180,000
Competitive compensation
Equity plan
Health, dental, vision insurance
+8