Mechanical MD

Red Bear Tech

Österreich

On-site

EUR 120,000 - 180,000

Full time

19 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Red Bear Tech seeks a Gewerberechtlicher Geschäftsführer für Metalltechnik, a state-regulated role overseeing compliance with Austrian authorities. The Trade MD acts as the registered managing director for regulated trades and coordinates with Gewerbebehörde and Arbeitsinspektorat on-site at the Kronstorf project near Linz.

The position requires an engineering degree and senior project management experience, fluent German and professional English, and a track record in large-scale piping and

Qualifications

  • EU/EEA/Swiss national or valid Austrian residence/work permit.
  • Residence near Linz for on-site supervision at Kronstorf site.
  • University degree in Mechanical, Process, or HVAC Engineering or equivalent with Individual Qualification (Individuelle Befähigung).
  • 5–7 years of post-qualification experience in large-scale mechanical/piping projects.
  • Fluent German (B2/C1) and professional English proficiency.

Responsibilities

  • Audit and authorize compliance with Austrian codes and ÖNORM/EN standards.
  • Coordinate inspections by Arbeitsinspektorat and maintain safety files.
  • Sign off on Level-2 pre-energization testing sequences and pneumatic leak tests.
  • Oversee Level-3 testing activities and boundary isolation with the main contractor.
  • Maintain regulatory governance and act as primary technical contact with authorities.

Skills

Project management
German language
English language

Education

Engineering degree (Mechanical/Process/HVAC) or equivalent

Job description

The position of Gewerberechtlicher Geschäftsführer für Metalltechnik is a formal, state-regulated appointment under Austrian public law. As the registered Trade Managing Director in the Austrian Trade Register (GISA), the successful candidate manages compliance vis-à-vis the Austrian Trade Authority (Gewerbebehörde) and the Labour Inspectorate (Arbeitsinspektorat).
In a data center construction environment, the Trade MD aligns international engineering designs with localized statutory execution. Under Section 39 and Section 94 No. 59 of the Austrian Trade Regulation Act (Gewerbeordnung 1994), this role holds the statutory regulatory and civil responsibility for ensuring that the company’s complete mechanical, industrial piping, and structural support footprint complies with local legislation, federal ordinances, and provincial frameworks.
The regulatory mandate for this position focuses on the execution, containment, and quality-control of the Primary Process Cooling Water (PCW) & Mechanical Systems Loop ('Brooklyn'). The Trade MD ensures that all mechanical framework elements, piping distributions, and valve assemblies strictly comply with the Pressure Equipment Directive (Druckgeräteverordnung), the Workplace Ordinance (AStV), and referenced ÖNORM / EN standards.

Required Qualifications & Legal CredentialsTo satisfy the stringent entry requirements of the Austrian Trade Authority, the candidate must possess the following credentials:

  • Academic/Engineering Equivalency: Alternatively, a university degree in Mechanical, Process, or HVAC Engineering combined with documented, multi-year senior project management experience in Austria satisfying the criteria for an "Individual Qualification" (Individuelle Befähigung).
  • Social Security & Residence Status: Must be an EU/EEA/Swiss national, OR a third-country national holding an Austrian residence/work permit that explicitly allows employment as a Trade MD. Must reside within a geographical location that allows for the practical fulfillment of regular on-site supervisory duties at the Kronstorf project site – near Linz.

Experience & Competencies

  • Minimum of 5–7 years of post-qualification experience managing large-scale commercial, industrial, or mission-critical (e.g., Data Center) heavy piping, structural steel, and fluid dynamics installation projects.
  • Deep knowledge of Austrian structural building regulations, the Pressure Equipment Directive (DGVO), and ÖNORM / EN standards for hydro-pneumatic network balancing.
  • Fluent in German (minimum B2/C1 level required for reading legal statutes, interacting with authorities, and signing official Prüfberichte) and professional proficiency in English (to coordinate with the Red Bear Tech group project team).

Operational Mandate & AuthorityTo fulfill this state-regulated mandate, the Trade MD is equipped with autonomous instructing and disciplinary power (selbstverantwortliche Anordnungsbefugnis) over Red Bear’s entire mechanical workforce on-site, including local hires, sub-contractors, and cross-border posted personnel.
The core operational mandate centers on providing technical oversight across the project life cycle, including:

  • Regulatory Governance: Serving as the primary technical contact person during inspections by the Arbeitsinspektorat, ensuring that all workforce welder qualifications, time-tracking records, and safety files conform to the Anti-Wage and Social Dumping Act (LSD-BG).
  • Technical Safeguarding (ÖNORM / EN Standards): Overseeing the physical installation of all mechanical systems to ensure compliance with Austrian codes. This includes verifying that chilled water infrastructure lines, modular bracket supports, and headers adhere to structural and pressure-bearing regulations.
  • Quality & Commissioning Sign-off: Serving as the sole authorized mechanical specialist to govern and sign off on Level-2 pre-energization testing sequences.
    • Red Bear holds sole execution responsibility for Level-2 Pneumatic Leak Testing (verifying site welding and flange seals at a stabilized 2.5 bar for 4 hours using nitrogen).
    • For Level-3 dynamic flushing, chemical water passivation, and Hydrostatic Testing (12 bar water pressure loop), the main base build contractor retains primary execution responsibility. Red Bear’s mechanical authority provides on-site engineering attendance, boundary isolation tracking, and reactive leak-rectification support during dynamic testing sequences.

Specific Project DeliverablesThe commercial mechanical scope legally governed and signed off under this trade appointment is limited to the Brooklyn 1.0.2 Module installation blueprint and includes:

  • Structural Mechanical Framing: Drilling anchor bolt paths, sliding free-issue shim packs, setting, and torquing Column Extension Frames (CEFTE / CEFME / CEFTD) and Upper/Lower cross beam structural trusses (PSCBB / STUCB / SBTMC).
  • Primary PCW Header Installation: Rigging, staging, and bolting the main PCW North and South Header pipe spools, straight extensions, drain trims, high-point air vents, and manual isolation valves.
  • Cooling Equipment Hook-up: Positioning, mechanical leveling, and connecting individual data center cooling modules (Rhino/CRAH units) to high-level header taps via dynamic flexible loop drops.
  • Pressurized Loop Isolation: Enforcing clean-end capping protocols, Nitrogen charge maintenance, and strict boundary isolation closures to eliminate particle contamination risks prior to system handovers.
  • Pneumatic Leak Testing Execution: Pre-drilling test ports, rigging calibrated EU-certified pressure gauges, executing and logging the mandatory Level-2 pneumatic (air/N2) leak tests at 2.5 bar absolute.
  • Sprinkler System Boundaries: Physical mounting and bracket alignment of defined DN25 sprinkler pipe sections attached to the modular legs (final system hydro-testing and code certification handled by others).

Key Responsibilities & Statutory Duties

  • Statutory Trade Compliance (Section 39 & Section 94 No. 59 GewO): Act as the company’s registered Trade Managing Director for the regulated trade of Metalltechnik für Metall- und Maschinenbau in the Austrian Trade Register (GISA). Maintain active technical communication with Upper Austrian structural and plant safety authorities.
  • Technical Supervision & Sign-off (Mechanical Frameworks): Audit and authorize on-site structural adjustments, welding logs, NDT inspection receipt checklists, and torque logs. Review, validate, and issue final statutory mechanical pre-functional inspection protocols (Abnahmeprotokolle / Prüfberichte) required by the General Contractor.
  • Operational Safety & Disciplinary Power: Exercise documented instructing power (Anordnungsbefugnis) over all local and posted mechanical fitters and rigging crews. Enforce health and safety regulations (ASchG) concerning crane platform rigging paths, heavy lifting maneuvers, pressurized lines, and concrete silica exposure limits.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Trade MD - Mechanical Systems Lead (Data Center)
Trade MD - Mechanical Systems Lead (Data Center)

Red Bear Tech • Austria

On-site
EUR 120,000 - 180,000
QA/QC Engineer
QA/QC Engineer

Red Bear Tech • Linz

On-site
EUR 55,000 - 85,000
Senior Lead Technician / Engineer HVAC with Austrian Trading License (m/f/d)
Senior Lead Technician / Engineer HVAC with Austrian Trading License (m/f/d)

Exyte • Wien

On-site
EUR 90,000 - 130,000
Senior Lead Technician / Engineer HVAC with Austrian Trading License (m/f/d)
Senior Lead Technician / Engineer HVAC with Austrian Trading License (m/f/d)

Exyte • Wien

On-site
EUR 70,000 - 110,000
Mechanical Owner's Representative
Mechanical Owner's Representative

Edison Smart® • Oberösterreich

On-site
EUR 75,000 - 110,000
Construction Manager Mechanical (m/f/d)
Construction Manager Mechanical (m/f/d)

Exyte • Wien

On-site
EUR 63,000 - 77,000
Quality & Commissioning Lead Datacenter (all genders)
Quality & Commissioning Lead Datacenter (all genders)

Zauner Anlagentechnik GmbH • Traiskirchen

Remote
EUR 43,000 - 65,000
International travel
Education and training
Home office
+5
Senior Project Manager (all genders) - Electrical & Construction, Complex Energy Projects
Senior Project Manager (all genders) - Electrical & Construction, Complex Energy Projects

CellCube Energy Storage • Wiener Neudorf

On-site
EUR 49,000 - 58,000
International travel allowances
Flexible hours & home office
Onboarding and training
Mechanical QA/QC
Mechanical QA/QC

g2 Recruitment • Wien

On-site
EUR 111,000 - 138,000
Project Engineer Data Center
Project Engineer Data Center

Zauner Anlagentechnik GmbH • Austria

Remote
EUR 37,000 - 42,000
Company bicycle
International environment
Choose your Hours
+7