Workshop Technician in Hydraulics and Pneumatic Workshop

The Emirates Group; Dubai; On-site; AED 70,000 - 100,000; Full time

Job summary

A leading aviation company seeks a Workshop Technician responsible for aircraft maintenance and calibration. The technician will handle components in compliance with procedures, work as part of a team, and ensure operational efficiency in a safe environment. Candidates should possess a degree in Engineering and extensive experience in aviation workshops.

Qualifications

• 5+ years experience in aviation, with a minimum of 2 years in a workshop environment.
• Knowledge of hydraulic and pneumatic systems.
• Familiar with maintenance documentation (SPM, CMM).

Responsibilities

• Perform maintenance and calibration on aircraft components and tools.
• Assist engineers in troubleshooting and defect rectifications.
• Ensure safety protocols are followed and work areas are clean.

Skills

Teamwork

Attention to detail

Troubleshooting

Education

Degree in Engineering (Aeronautical, Mechanical, Avionics, Electronics or equivalent)

Tools

Aircraft Maintenance Manual (AMM)

Illustrated Parts Catalogue (IPC)

Component Maintenance Manual (CMM)

Job description

As a Workshop Technician you will be responsible for carrying out maintenance/ calibration tasks on Emirates and third party aircraft components/ tools and equipment in accordance with company procedures and regulations. The job holder works as part of a team under the direction and guidance of the assigned supervisor/ Engineer within the appropriate trade/cross trade disciplines for which they have been trained.

In this role you will

• Carry out routine component/ tools servicing and calibration/ maintenance /modification and, or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures.
• Complete any component / tools maintenance and other tasks as assigned by immediate Supervisor/Engineers. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM), standard Practice Manual (SPM), Quality Manual ISO/IEC 17025 or other approved documentation required to carry out the task.
• Assist supervisor/ Engineers in trouble shooting, defect rectifications and carrying out modifications while performing instructions contained in the job card.
• Ensure all work locations are kept clean and maintain excellent housekeeping.
• Participate and promote in creating a safety culture in an effort to minimise accidents and highlight any deficiencies/failures that can lead to such accidents. This includes being aware and communicating safety shortfalls.
• Maintain vigilance in ensuring work areas (including the ramp), vehicles, stands, lockers are free of FOD and that toolboxes are regularly audited, maintained and kept clean.
• Ensure prompt attendance to all allocated tasks with the intent to reduce TAT and avoid operational delays/disruptions. Should be able to communicate any aircraft/ component/ structural defects found to the supervisor/ Engineer in an expedient manner and ensure during shift handovers all required information is clearly passed to the staff taking over.
• Enable to perform testing, verifications, services to monitor, assist and support all Overhaul/Repair/Refurbishment/Inspection & Calibration tasks required as per special procedures and manuals used in respective workshop.

Hydraulic Workshop Specific

- Understand the function and operation of aircraft hydraulic components.

- Ability to perform repair as per SPM/CMM and be familiar with the hydraulic component maintenance process.

- Knowledge of hydraulic test bench operation and component testing, ability to perform testing and fault isolation of different types of hydraulic component.

- Familiar with the standard and special tooling and equipment required for the hydraulic component maintenance.

Pneumatic Workshop Specific

- Understand the function and operation of aircraft pneumatic components, for example Pneumatic Valve, Solenoid Valve, Check Valve, Bleed Valve, Regulator Valve, Torque motor, Servo Actuator Valve, Narrow Body Starter, Flow Control Valve, Wide Body Starter, PDU (Power Drive Unit) and ACM (Air Cycle Machine).

- Ability to perform repair as per SPM/CMM and be familiar with the pneumatic component maintenance process.

- Knowledge of pneumatic test bench operation and component testing, ability to perform testing and fault isolation of different types of pneumatic component.

- Familiar with the standard and special tooling and equipment required for the pneumatic component maintenance.

Qualification

Job Purpose

As a Workshop Technician you will be responsible for carrying out maintenance/ calibration tasks on Emirates and third party aircraft components/ tools and equipment in accordance with company procedures and regulations. The job holder works as part of a team under the direction and guidance of the assigned supervisor/ Engineer within the appropriate trade/cross trade disciplines for which they have been trained.

In this role you will

• Carry out routine component/ tools servicing and calibration/ maintenance /modification and, or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures.
• Complete any component / tools maintenance and other tasks as assigned by immediate Supervisor/Engineers. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM), standard Practice Manual (SPM), Quality Manual ISO/IEC 17025 or other approved documentation required to carry out the task.
• Assist supervisor/ Engineers in trouble shooting, defect rectifications and carrying out modifications while performing instructions contained in the job card.
• Ensure all work locations are kept clean and maintain excellent housekeeping.
• Participate and promote in creating a safety culture in an effort to minimise accidents and highlight any deficiencies/failures that can lead to such accidents. This includes being aware and communicating safety shortfalls.
• Maintain vigilance in ensuring work areas (including the ramp), vehicles, stands, lockers are free of FOD and that toolboxes are regularly audited, maintained and kept clean.
• Ensure prompt attendance to all allocated tasks with the intent to reduce TAT and avoid operational delays/disruptions. Should be able to communicate any aircraft/ component/ structural defects found to the supervisor/ Engineer in an expedient manner and ensure during shift handovers all required information is clearly passed to the staff taking over.
• Enable to perform testing, verifications, services to monitor, assist and support all Overhaul/Repair/Refurbishment/Inspection & Calibration tasks required as per special procedures and manuals used in respective workshop.

Hydraulic Workshop Specific

- Understand the function and operation of aircraft hydraulic components.

- Ability to perform repair as per SPM/CMM and be familiar with the hydraulic component maintenance process.

- Knowledge of hydraulic test bench operation and component testing, ability to perform testing and fault isolation of different types of hydraulic component.

- Familiar with the standard and special tooling and equipment required for the hydraulic component maintenance.

Pneumatic Workshop Specific

- Understand the function and operation of aircraft pneumatic components, for example Pneumatic Valve, Solenoid Valve, Check Valve, Bleed Valve, Regulator Valve, Torque motor, Servo Actuator Valve, Narrow Body Starter, Flow Control Valve, Wide Body Starter, PDU (Power Drive Unit) and ACM (Air Cycle Machine).

- Ability to perform repair as per SPM/CMM and be familiar with the pneumatic component maintenance process.

- Knowledge of pneumatic test bench operation and component testing, ability to perform testing and fault isolation of different types of pneumatic component.

- Familiar with the standard and special tooling and equipment required for the pneumatic component maintenance.

Qualification

Qualifications:

Degree or Honours (12+3 or equivalent)

Experience:

Engineering / Other 5+ Years

Knowledge/Skills:

Degree in Engineering in Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering OR Aircraft Maintenance Engineering Licence OR Engineering Apprenticeship.

- 5+ Years of post qualification experience in aviation field, out of which minimum 2 years should be in workshop environment e.g. (Hydraulic, Pneumatic).

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at [e-mail]