Welding Inspector

Bureau Veritas do Brasil; Abu Dhabi; On-site; AED 200,000 - 320,000; Full time

Job summary

Bureau Veritas Abu Dhabi is seeking a Welding Inspector with strong codes and NDT experience to lead inspection activities on major projects. The role requires rapid interpretation of technical standards, effective communication with clients, and strict adherence to BV procedures.

The candidate should hold CSWIP 3.1/3.2 or AWS-CWI, ASNT/PCN Level II in RT/UT/MT/PT, and a Mechanical Engineering background. Offshore site exposure and HSE compliance are essential.

Qualifications

• CSWIP 3.1 or 3.2 or AWS - CWI or an approved equivalent.
• ASNT / PCN Level II in RT, UT, MT & PT or an approved equivalent.

Responsibilities

• Review applicable contractual requirements and technical standards.
• Define and review Quality Plan and relevant procedures.
• Validate inspection assignment documentation and schedules.
• Select Bureau Veritas interventions and inspection techniques.
• Execute or supervise inspection per Quality Plan and procedures.
• Prepare inspection reports and address non-conformities.
• Maintain BV quality system compliance and evident workmanship.

Skills

CSWIP 3.1/3.2

AWS-CWI

ASNT Level II

PCN Level II

NDT Inspection

Education

Degree/Diploma in Mechanical Engineering or HNC

Job description

Job Description

Position

Welding Inspector

Office / Department

Abu Dhabi IND

Reporting to

Team Leader

Key Working Relationship

• Large Project Manager
• Administration Assistant
• Technical Manager
• Deputy Technical Manager
• Customers / Clients / Project Management Consultants
• He is expected to establish direct contact with Client and whenever necessary with other Bureau Veritas organization.

Specialty

CSWIP 3.1 or 3.2 or AWS - CWI or an approved equivalent.

ASNT / PCN Level II in RT, UT, MT & PT or an approved equivalent.

Education

Degree / Diploma in Mechanical Engineering or HNC

Training

CSWIP 3.1 or 3.2 or AWS - CWI or an approved equivalent.

ASNT / PCN Level II in RT, UT, MT & PT or an approved equivalent.

Site Safety Induction

Sea Survival Course for Offshore Sites

H2S Course if Required

Specific Technical Induction for Specific Projects.

Technical knowledge

Strong knowledge of the International Codes & Standards such as ASME, API, ANSI, ASTM and BS.

Experience with Welding / NDT Inspection according to relevant Codes.

Application of Codes and standards, project specifications and procedures.

Experience

Inspector/Technician : Minimum 5 years experience in similar field

Engineer Surveyor : Minimum 8 years experience in similar field

Senior Engineer Surveyor : Minimum 10 years experience in similar field

Responsibilities / Authorities / Accountabilities

Primary Functions

• Review of applicable contractual requirements (Technical standards, specifications etc.)
• Definition and review of Quality Plan and relevant procedures.
• Review and validation of inspection assignment documentation (technical aspects, reference documentation, schedule, milestones, reporting, etc.)
• Definition of Bureau Veritas interventions
• Selection of the most appropriate inspection techniques
• Execution or supervision of inspection according to pre-defined Quality Plan, and to the established inspection procedures / techniques
• Execution of inspection reporting including treatment of Non-conformities (NCR’s) and other applicable deliverables
• Ensuring quality of inspection according to BV Quality System
• Interpretation of results of inspections
• Treatment of Non-conformities / corrective actions
• Review and appraisal of inspection procedures
• Maintaining internal communication
• Promotes Bureau Veritas service portfolio to clients
• Respects security guidelines of Bureau Veritas and safeguards personal security in the working environment
• Actively participates in the sharing of knowledge and information (Knowledge Management)
• Witness welding procedure qualification tests
• Witness welder and welding operator’s performance tests.
• Ensure proper fit-up by checking edge preparation (bevel angles, root gap, land, overlap etc.)
• Monitor pre-heating temperature, welding consumables, parameters
• Ensure welding works are performed as per approved procedures (WPS) and welders
• In-process welding surveillance and visual inspection of weld finish.
• Monitor storage, handling and baking of welding consumable.
• Ensure that fabrication is carried out as per approved drawings / Inspection test plans.
• Monitor NDT / PWHT and review reports
• Review radiography films and endorse RT reports
• Prepare inspection reports on time and submit to Team Leader for review and further action.

Technical Expertise

• Application of codes and standards, project specifications and procedures
• Within his field of competency, the inspector is expected to conduct the activities stated in Primary functions.
• Fully conversant with relevant inspection techniques and able to select the most appropriate inspection technique.
• Able to verify and approve Non-conformities / corrective actions
• Able to identify required Bureau Veritas interventions, based on a pre-defined Quality Plan and according to specified standards.
• Able to review / appraise inspection procedures

Business Requirements

• Report to Team leader about day-to-day inspection, non-compliance /discrepancy to specification.

Self Management

• Maintains a high degree of expertise through permanent specialized training and knowledge management.
• Ensure that inspection is carried out as per approved drawings / Inspection test plans.
• Meet project development objectives
• Should be Results oriented, Service driven and Problem solving
• Comply with company regulations, procedures and Code of Ethics.

Customer Focus

• Ensure that Inspection is carried out as per approved drawings / Inspection test plans and other applicable Technical specifications.
• Maintain regular job related contact with clients and Liaises with client and/or Project Management Consultant with ease
• Understand client needs and work to achieve successful project outcomes.
• Develop trust and open communication with the client.

HSE Requirements

• Comply at all times with all applicable legal requirements, BV Abu Dhabi HSE Policies and procedures, client’s HSE procedures and code of practices.
• Maintain personal work areas tidy and hazard free and report any deviation/fault/hazard immediately to the location manager/line manager/supervisor
• Report immediately any newly identified hazard and participate in devising suitable operational control to eliminate/minimize the pertinent risk.
• Report immediately any HSE incident and cooperate in investigation
• Use appropriate PPE at work area and be aware of:
• the risks appropriate PPE will control or minimize
• Report immediately incase the PPE is worn off or lost.
• Communicate to their immediate manager any unsafe work practice or condition and opportunities for improvement of HSE practices.
• Take care of your own health and safety and that of people who may be affected by what you do (or do not do).
• Co-operate with others on health and safety, and not interfere with, or misuse, anything provided for your health, safety or welfare.

Continual Development

The opportunities for improvement in

• Technical and professional competencies through attending specialized training courses and seminars
• Stay updated on all welding & NDT related developments

KPI’s

• Time taken to deliver the report to the Team Leader
• Quality of report
• Inspection done within the allocated timeframe
• Share information, Best practice, Knowledge Management

Monitored By

Team Leader Site Inspection Services