To research, design, develop, integrate and validate electronic solutions for acoustics and ultrasound projects, from concept and feasibility assessment through prototyping, laboratory and field validation, and transfer to production.
The role combines hands-on engineering and applied research with technical leadership. The engineer develops analog, digital and mixed-signal electronics, evaluates transducers and signal chains, conducts experimental research, and converts results into practical engineering solutions. The engineer works across electronics, firmware, mechanical, software, data-processing, manufacturing and operations teams, providing technical guidance, design reviews and knowledge sharing.
- Research and Concept Development
- Conduct applied research in active acoustics, electroacoustic transducers, acoustic sensing, signal generation and signal acquisition.
- Translate project objectives, customer needs and operational constraints into measurable system and subsystem requirements.
- Review relevant technologies, technical literature, patents and available solutions.
- Develop and evaluate system concepts through analytical calculations, simulations, laboratory experiments and proof-of-concept prototypes.
- Define key performance parameters, including frequency range, sensitivity, signal-to-noise ratio, dynamic range, distortion and measurement accuracy.
- Plan experiments, define variables and acceptance criteria, analyse measurement data and correlate results with theoretical and simulation models.
- Identify technical risks and limitations, document research findings and provide recommendations for further development.
- Electronic Hardware Development
- Develop electronics for generation, transmission, reception, conditioning and acquisition of acoustic signals.
- Design low-noise analog front ends, filters, amplifiers, impedance-matching circuits and transmitter/power-amplifier circuits.
- Develop analog, digital, mixed-signal and power-supply circuits in accordance with system requirements.
- Select ADCs, DACs, operational amplifiers, drivers, converters, power components, processors, microcontrollers, DSP devices and other electronic components.
- Perform circuit calculations, simulation, tolerance and noise analysis, power budgeting and thermal assessment.
- Perform schematic capture, defining requirements for grounding, shielding, signal/power integrity, controlled impedance, isolation and EMC.
- Perform and review PCB placement and routing, particularly for sensitive analog, high-current, high-voltage and mixed-signal sections.
- Generate and maintain schematics, BOMs, PCB manufacturing files and engineering specifications.
- Ensure designs meet reliability, maintainability, DFM/DFT requirements and consider component availability and obsolescence.
- Electroacoustic Transducers and Sensor
- IntegrationEvaluate and select suitable acoustic emitters and receivers, including piezoelectric, electromagnetic or other applicable transducer technologies.
- Design interfaces between transducers and signal-generation/acquisition electronics.
- Characterise transducer parameters, including impedance, resonance, sensitivity, bandwidth, efficiency, non-linearity and temperature dependence.
- Define excitation waveforms, voltage and current requirements, operating duty cycles and protection requirements.
- Develop signal-conditioning solutions for low-level acoustic and vibration measurements.
- Support the development of transducer packaging, mounting, acoustic coupling and environmental protection methods.
- Analyse mechanical, thermal and environmental effects on electroacoustic performance and contribute to calibration, error budgeting and compensation.
- Participate in the design of calibration methods and reference measurement arrangements.
- Work with firmware and software engineers on digital correction, filtering, calibration and signal-processing functions.
- Modelling and Signal Analysis
- Develop analytical and numerical models of electronic and electroacoustic subsystems.
- Perform DC, AC, transient, noise and tolerance analyses.
- Analyse acoustic measurements in time and frequency domains using spectral analysis, filtering, correlation and other signal-processing methods.
- Estimate SNR, frequency response, harmonics, distortion, phase response and system stability.
- Develop scripts and engineering tools for measurement processing, test automation and comparison of experimental results.
- Support signal-processing algorithm development and maintain traceability between requirements, models, measurements and design decisions.
- Prototype Bring-up, Testing and Validation
- Plan and conduct electronic board bring-up, debugging and functional testing.
- Develop verification and validation plans, test conditions, acceptance criteria and test configurations.
- Design and assemble laboratory test setups, fixtures and calibration arrangements.
- Use oscilloscopes, spectrum analysers, signal generators, network or impedance analysers, logic analysers, data-acquisition equipment and precision measurement instruments.
- Perform electrical, acoustic, functional, environmental and reliability testing, including frequency response, noise, distortion, sensitivity and impedance measurements as applicable.
- Investigate hardware, transducer, firmware and system-integration issues using structured root-cause analysis.
- Compare experimental results against requirements, simulations and expected theoretical behaviour, maintaining appropriate test records and traceability.
- Prepare test reports and recommend corrective actions or design improvements and support qualification, field trials and acceptance testing where required.
- Ensure safe handling of laboratory equipment, high-voltage circuits, power amplifiers and acoustic test systems.
- Project Development
- Participate in all project stages from requirements and feasibility assessment through design, prototyping, verification, validation and release.
- Prepare technical work breakdowns, estimates, schedules and resource requirements for assigned activities.
- Deliver assigned engineering tasks in accordance with agreed quality, cost and schedule objectives.
- Track technical actions, risks, assumptions, dependencies and open issues.
- Coordinate interfaces between electronics, acoustics, firmware, software and mechanical subsystems.
- Participate in design, prototype readiness and test readiness reviews.
- Provide evidence-based recommendations on architecture, design alternatives, component selection and qualification strategy.
- Proactively manage technical risks and support suppliers or external laboratories where specialised components, testing or expertise are required.
- Manufacturing and Product Support
- Support prototype assembly and transfer of developed solutions to manufacturing.
- Investigate assembly, component, PCB and test-related issues with manufacturing and maintenance teams.
- Develop assembly, inspection, calibration and test procedures, fixtures and engineering tools as required.
- Ensure designs support manufacturability, testability, serviceability and cost efficiency.
- Support failure analysis, corrective actions, component replacement, redesign and obsolescence management.
- Provide technical support during pilot production and initial deployment, incorporating manufacturing and field feedback into design revisions.
- Technical Documentation and Quality
- Prepare and maintain requirements, design descriptions, calculations, schematics, interface documents and engineering specifications.
- Produce research, feasibility, test and validation documentation.
- Maintain accurate BOMs, component specifications and manufacturing documentation.
- Ensure configuration control and traceability of design data, prototypes and test results.
- Follow applicable product-development, document-control and engineering-change and quality-management processes.
- Contribute to internal engineering standards and protect company intellectual property and confidential technical information.
- Team Collaboration and Technical Leadership
- Collaborate with electronics, firmware, mechanical, software, data-processing and test engineers throughout the development lifecycle
- Provide technical guidance and support to other engineers and team members in electronics, acoustics, measurement and experimental methods.
- Mentor less-experienced engineers by sharing practical knowledge, design approaches, test methods and lessons learned.
- Review design concepts, schematics, calculations, test methods and engineering documentation, providing constructive technical feedback.
- Contribute to design reviews, technical discussions and cross-disciplinary problem solving
- Support the decomposition of complex technical problems into clearly defined engineering tasks and coordinate their technical interfaces with other team members.
- Promote knowledge sharing within the R&D team by documenting design approaches, experimental methods, test results, lessons learned and reusable technical solutions.
- Support colleagues during prototype bring-up, troubleshooting and root-cause investigations, and communicate technical risks and decisions clearly to project stakeholders.
Qualifications/Requirements
- Bachelor’s or Master’s degree in Electronics Engineering, Electrical Engineering, Radio Engineering, Instrumentation, Applied Physics, Acoustics or a suitable equivalent technical discipline.
- Postgraduate degree or demonstrated research experience is advantageous.
- Minimum 7 years of relevant experience in electronics hardware development, instrumentation, acoustic systems, sensor development or applied RnD.
- Demonstrated experience developing electronic or experimental systems from requirements through prototyping, testing and validation.
- Strong experience in analog/mixed-signal design, laboratory measurements, debugging and experimental data analysis.
- Experience with acoustic, ultrasonic, vibration or sensor systems and high-performance/high-reliability systems is advantageous
- Follow all company HSE procedures and laboratory safety requirements.
Special Skills & Knowledge:
- Electronics
- Analog, digital and mixed-signal circuit design
- Low-noise amplification, precision measurement, filtering and data-acquisition circuits.
- ADC/DAC interfaces, power supplies, power amplifiers and transducer drivers.
- Signal/power integrity, grounding, shielding and EMC.
- PCB schematic design and layout review.
- DFM, DFA and DFT principles.
- Acoustics/Ultrasonic and measurement
- Fundamentals of acoustics, vibration and wave propagation.
- Electroacoustic transducers and their equivalent electrical characteristics.
- Acoustic signal generation, reception and acquisition.
- Noise sources, distortion, dynamic range and SNR.
- Measurement uncertainty, repeatability and calibration principles.
- Time-domain and frequency-domain signal analysis.
- Engineering tools
- Proficiency in electronic design tools such as Altium Designer, OrCAD, KiCad or equivalent.
- Experience with circuit simulation tools such as PSpice, LTspice or equivalent.
- Excel, MATLAB and/or Python for engineering calculations, data processing and test automation.
- Practical use of oscilloscopes, spectrum analysers, signal generators and other equipment.
- Acoustic/multiphysics simulation, version control, requirements-management and PLM/PDM systems are advantageous.
- Research, Communication and Technical Leadership
- Ability to formulate hypotheses, develop structured experimental programmes, analyse complex technical problems and identify root causes.
- Ability to convert research findings into practical engineering requirements and designs.
- Ability to prepare clear technical calculations, design documents and test/research reports.
- Ability to work independently and communicate technical conclusions across multidisciplinary teams
- Ability to provide technical guidance, constructive reviews and mentoring to less-experienced engineers.