Cnc Milling Machinist

Jvr Software

South Africa

On-site

ZAR 240,000 - 360,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Jvr Software in South Africa is seeking a CNC Machinist with milling programming and setting expertise. You will read engineering drawings, select tooling, and operate CNC Milling machines using Fanuc and Siemens controls.

The role requires Edgecam and SolidWorks experience, GD&T proficiency, and the ability to load, align, and clamp heavy castings up to 2 tons. It's a single-shift site with safety protocols and occasional overtime by exception.

Qualifications

  • Reading engineering drawings, dimensions and tolerances.
  • Selecting tooling, speeds, feeds and machining methods.
  • Inspecting components with measuring equipment.
  • Troubleshooting machining issues and adjusting programs or setups.
  • Interpreting GD&T on drawings.

Responsibilities

  • Program, set up and operate CNC Milling machines.
  • Machining a range of materials including steel, stainless steel, copper, brass, plastic and aluminium.
  • Load, align, and clamp heavy castings up to 2 tons using overhead cranes and fixtures.
  • Ensure tasks meet operational procedures and safety protocols.
  • Maintain daily production quantities and record times in the system.

Skills

CNC Milling programming
GD&T interpretation
Measurement skills
Teamwork
Communication

Education

Matric or NQF equivalent
Qualified Turner (Red Seal)

Tools

Edgecam
SolidWorks
Fanuc controls
Siemens controls

Job description

CNC Machinist - Milling Programmer and Setter
  • Edgecam and SolidWorks Experience, solid foundation in CNC Milling programming and setting
  • Program, set up and operate CNC Milling machines
  • Read and interpret engineering drawings, dimensions and tolerances
  • Select suitable tooling, cutting speeds, feeds and machining methods
  • Inspect components using appropriate measuring equipment
  • Troubleshoot machining issues and adjust programs or setups as needed
  • Machine a range of materials, including steel, stainless steel, copper, brass, plastic and aluminium
  • Practical experience in CNC Milling program and machine setting
  • Interpret engineering drawings with GD&T specifications in order to understand machining requirements.
  • Securely load, align, and clamp heavy castings and steel structures (up to 2 tons) onto the 360-degree rotating work table using overhead cranes, hoists, and precision fixture setups.
  • Setup up components and tool geometry for jobs which are either pre-machined, raw casting or welded up for machining to within 0.01 mm using approved Job Card routings and/or first principles.
  • Make use of Fanuc and Siemens controls to operate the machine.
  • Ensure that machining tasks are completed in line with operational procedures.
  • Observe machine operations to protect tooling or machine malfunctions and adjust where necessary
  • Machining of components to the approved CNC Programs, completing first off and in process checks as per job routing requirements.
  • Ensure daily production quantities are maintained and capture job times on production computers.
  • Perform daily operator-level maintenance checks, including checking oil sights, coolant condition, monitoring central lubrication systems, and reporting mechanical variations.
  • Maintain a clean work area and strictly follow all applicable safety protocols, especially regarding crane operation and large machine guards.
DUTIES & RESPONSIBILITIES
  • Edgecam and SolidWorks Experience, solid foundation in CNC Milling programming and setting
  • Program, set up and operate CNC Milling machines
  • Read and interpret engineering drawings, dimensions and tolerances
  • Select suitable tooling, cutting speeds, feeds and machining methods
  • Inspect components using appropriate measuring equipment
  • Troubleshoot machining issues and adjust programs or setups as needed
  • Machine a range of materials, including steel, stainless steel, copper, brass, plastic and aluminium
  • Practical experience in CNC Milling program and machine setting
  • Interpret engineering drawings with GD&T specifications in order to understand machining requirements.
  • Securely load, align, and clamp heavy castings and steel structures (up to 2 tons) onto the 360-degree rotating work table using overhead cranes, hoists, and precision fixture setups.
  • Setup up components and tool geometry for jobs which are either pre-machined, raw casting or welded up for machining to within 0.01 mm using approved Job Card routings and/or first principles.
  • Make use of Fanuc and Siemens controls to operate the machine.
  • Ensure that machining tasks are completed in line with operational procedures.
  • Observe machine operations to protect tooling or machine malfunctions and adjust where necessary
  • Machining of components to the approved CNC Programs, completing first off and in process checks as per job routing requirements.
  • Ensure daily production quantities are maintained and capture job times on production computers.
  • Perform daily operator-level maintenance checks, including checking oil sights, coolant condition, monitoring central lubrication systems, and reporting mechanical variations.
  • Maintain a clean work area and strictly follow all applicable safety protocols, especially regarding crane operation and large machine guards.
Secondary duties
  • Ensure the use of the correct PPE at all times.
  • Ensure that all health and safety regulations are adhered to at all times.
  • Operate other CNC Lathe and Milling machines occasionally.
  • Ensure correct and safe use of all the tools and equipment, any defected tools to be reported immediately to the line manager.
  • Assist in training, sharing your knowledge to assist others in the production environment.
Qualifications & Skills
  • Matric or NQF equivalent
  • Qualified Turner (Red Seal)
  • 5+ years machining experience (Milling specifically, Horizontal advantageous)
  • Strong understanding of GD&T when interpreting engineering blueprints
  • Ability to accurately measure and record using various measuring equipment including vernier callipers, micrometers, bore gauges, etc
  • Strong communication and team work skills
Working Conditions
  • Metal manufacturing workshop environment
  • PPE to be worn at all times as required
  • Ability to stand, bend, and reach around large machine beds for extended periods
  • Ability to lift and manoeuvre heavy tooling independently
  • Non-smoking environment
  • Single shift. Mon Thurs: 07h00 16h15, Fri: 07h00 to 12h00
  • Occasional overtime or weekend work by exception only
  • December (Christmas) Shutdown
The Opportunity

This role lets you use your programming expertise in a supportive,

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Cnc Machinist - Horizontal Milling
Cnc Machinist - Horizontal Milling

Esg Recruitment • Johannesburg

On-site
ZAR 350,000 - 520,000
CNC Machinist - Horizontal Milling 2027
CNC Machinist - Horizontal Milling 2027

ESG Recruitment • Johannesburg

On-site
ZAR 300,000 - 420,000
Cnc Operator: Laser, Punch & Combo Master
Cnc Operator: Laser, Punch & Combo Master

The Recruitment Pig • South Africa

On-site
ZAR 83,000 - 124,000
Overtime opportunities
Medical aid
Retirement fund contributions
+3
Cnc Machinist - Milling & Turning Specialist
Cnc Machinist - Milling & Turning Specialist

Placements24 • Klerksdorp

On-site
ZAR 360,000 - 480,000
Overtime pay
State-of-the-art CNC machinery
Training & development
+1
Cnc Milling Machinist
Cnc Milling Machinist

Jendamark • Gqeberha

On-site
ZAR 201,000 - 312,000
5-Axis CNC Milling Programmer (Supervisory) â East Rand
5-Axis CNC Milling Programmer (Supervisory) â East Rand

Jobs 4 All • Gauteng

On-site
ZAR 420,000 - 650,000
MILLING & TURNING OPERATOR
MILLING & TURNING OPERATOR

Professional Resources Partners Pty Ltd • Roodepoort

On-site
ZAR 190,000 - 210,000
Production Foreman - Machine Shop
Production Foreman - Machine Shop

Frankwen Forge • Germiston

Remote
ZAR 600,000 - 900,000
Production Machine Operator (Cnc Specialist)
Production Machine Operator (Cnc Specialist)

Placements24 • East London

On-site
ZAR 83,000 - 124,000
Competitive pay
Overtime opportunities
Medical aid contributions
+4
Machine Operator - CNC Machining
Machine Operator - CNC Machining

Placements24 • Soweto

On-site
ZAR 180,000 - 300,000