Winch Truck Driver

National Tank & Equipment; Geismar (LA); On-site; USD 60,000 - 85,000; Full time

Job summary

National Tank & Equipment is seeking a Winch Truck Driver to safely transport frac tanks and rental equipment between branches and customer sites. You will operate a winch truck, secure loads, complete DOT documentation, and support loading, unloading, and yard operations while upholding safety and quality.

The role requires a valid Class A CDL with 3+ years of experience and DOT compliance knowledge. Local Baton Rouge area work, with potential on-call and overtime, and a strong emphasis on

Qualifications

• Valid Class A CDL held for more than 3 years with clean driving record.
• Minimum of 3 years of experience operating commercial vehicles, preferably winch trucks, roll-off trucks, lowboys, flatbeds, or similar heavy equipment transport vehicles.
• Ability to pass and maintain a DOT physical and medical certification.
• Knowledge of DOT regulations, vehicle inspections, load securement requirements, and safe-driving practices.
• Strong mechanical aptitude with the ability to perform basic equipment and vehicle troubleshooting.
• Possess or obtain and maintain a valid TWIC card.
• Willingness to participate in an on-call rotation and respond to after-hours emergency service needs.
• Ability to work outdoors in varying weather and jobsite conditions.
• Ability to lift up to 50 pounds and safely climb, bend, stoop, and secure loads as required.
• Experience transporting pumps, tanks, hoses, piping, containment equipment, or other specialty rental equipment.
• Familiarity with refinery, petrochemical, industrial, construction, or municipal jobsite requirements.
• Basic knowledge of hydraulic systems, trailers, pumps, and rental equipment.
• Safety-first mindset with a commitment to DOT and company compliance.
• Strong customer service and communication skills.
• Ability to work independently with minimal supervision.
• Effective time management and route planning skills.
• Attention to detail when completing inspections, paperwork, and load securement.

Responsibilities

• Operate a winch truck to safely load, transport, deliver, and retrieve frac tanks and other rental equipment.
• Plan and complete assigned deliveries, pickups, and branch transfers safely, accurately, and on schedule.
• Review routes, customer instructions, equipment requirements, and shipping documents before departure.
• Communicate delays, site concerns, equipment issues, or changes in delivery status promptly.
• Inspect, prepare, and secure loads using proper securement methods, including chains, straps, binders, and other required equipment.
• Verify load securement before departure, during transit, and prior to unloading.
• Assist with loading, unloading, pumps, hoses, and forklift operations when trained and assigned.
• Complete pre-trip and post-trip inspections and immediately report vehicle or equipment deficiencies to the Branch Manager.
• Accurately complete DOT logs, inspection reports, delivery tickets, time records, mileage reports, and other required documentation.
• Maintain the cleanliness, appearance, and operational readiness of assigned vehicles and equipment.
• Follow all DOT regulations, company policies, customer site requirements, and safe-driving practices.
• Serve as a professional representative of NTE and provide exceptional customer service at customer locations and job sites.
• Maintain required licenses, certifications, and job-related training.
• Participate in overtime, on-call rotations, and after-hours emergency response assignments as business needs require.
• Use mechanical aptitude and basic troubleshooting skills to identify, communicate, and assist in resolving vehicle or equipment concerns.
• Perform basic inspections and troubleshooting; however, this position does not require the full duties of a mechanic.

Skills

CDL Class A

DOT regulations knowledge

Load securement knowledge

Customer service

Time management

Communication skills

Independent work

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Winch Truck Driver

FullTime Manual Labor Baton Rouge, LA, Geismar, LA, US 1 Attachments

2 days ago Requisition ID: 2933

Winch Truck Driver

As our Winch Truck Driver, your mission is to safely and efficiently transport frac tanks and other rental equipment between branch and customer locations. You will operate a winch truck, inspect and secure loads, maintain required DOT documentation, and support loading, unloading, delivery, pickup, and yard operations while protecting customers, coworkers, the public, and company assets.

What You Will Do

Transportation & Delivery

• Operate a winch truck to safely load, transport, deliver, and retrieve frac tanks and other rental equipment.
• Plan and complete assigned deliveries, pickups, and branch transfers safely, accurately, and on schedule.
• Review routes, customer instructions, equipment requirements, and shipping documents before departure.
• Communicate delays, site concerns, equipment issues, or changes in delivery status promptly.
• Inspect, prepare, and secure loads using proper securement methods, including chains, straps, binders, and other required equipment.
• Verify load securement before departure, during transit, and prior to unloading.
• Assist with loading, unloading, pumps, hoses, and forklift operations when trained and assigned.

Vehicle Inspection & Documentation

• Complete pre-trip and post-trip inspections and immediately report vehicle or equipment deficiencies to the Branch Manager.
• Accurately complete DOT logs, inspection reports, delivery tickets, time records, mileage reports, and other required documentation.
• Maintain the cleanliness, appearance, and operational readiness of assigned vehicles and equipment.

Safety & Customer Service

• Follow all DOT regulations, company policies, customer site requirements, and safe-driving practices.
• Serve as a professional representative of NTE and provide exceptional customer service at customer locations and job sites.
• Maintain required licenses, certifications, and job-related training.
• Participate in overtime, on-call rotations, and after-hours emergency response assignments as business needs require.

Mechanical Aptitude

• Use mechanical aptitude and basic troubleshooting skills to identify, communicate, and assist in resolving vehicle or equipment concerns.
• Perform basic inspections and troubleshooting; however, this position does not require the full duties of a mechanic.

To Succeed, You Will Need

• Valid Class A CDL held for more than 3 years with clean driving record.
• Minimum of 3 years of experience operating commercial vehicles, preferably winch trucks, roll-off trucks, lowboys, flatbeds, or similar heavy equipment transport vehicles.
• Ability to pass and maintain a DOT physical and medical certification.
• Knowledge of DOT regulations, vehicle inspections, load securement requirements, and safe-driving practices.
• Strong mechanical aptitude with the ability to perform basic equipment and vehicle troubleshooting.
• Possess or obtain and maintain a valid TWIC card.
• Willingness to participate in an on-call rotation and respond to after-hours emergency service needs.
• Ability to work outdoors in varying weather and jobsite conditions.
• Ability to lift up to 50 pounds and safely climb, bend, stoop, and secure loads as required.
• Experience transporting pumps, tanks, hoses, piping, containment equipment, or other specialty rental equipment.
• Familiarity with refinery, petrochemical, industrial, construction, or municipal jobsite requirements.
• Basic knowledge of hydraulic systems, trailers, pumps, and rental equipment.
• Safety-first mindset with a commitment to DOT and company compliance.
• Strong customer service and communication skills.
• Ability to work independently with minimal supervision.
• Effective time management and route planning skills.
• Attention to detail when completing inspections, paperwork, and load securement.

Job Location & Schedule

This position is based at our Baton Rouge location and requires local field service travel. Standard hours are Monday through Friday, 7:00 AM to 5:00 PM, with the possibility of overtime and participation in a rotating on-call schedule.

About the Company

National Tank & Equipment (NTE), part of the Power Technique division of Atlas Copco Group, is a leading specialty rental provider of fluid transfer, fluid storage, dewatering, filtration, and containment solutions. We support critical operations across the energy, petrochemical, industrial, infrastructure, environmental, municipal, mining, and construction sectors with a nationwide network of locations and equipment. NTE delivers engineered solutions including pumps, tanks, filtration systems, containment equipment, piping, and related accessories that help customers safely manage fluids and maintain productivity.

Because many of our customers operate around the clock and depend on us to respond to urgent operational challenges, NTE operates as a 24/7 emergency response and rental solutions provider. Our employees play a critical role in helping customers minimize downtime, maintain compliance, and keep operations running safely and efficiently whenever and wherever support is needed.

As part of Atlas Copco's Power Technique business area, we are backed by a global organization focused on innovative power and flow solutions, specialty rental services, and sustainable productivity. Our culture is built on safety, accountability, collaboration, customer success, and continuous development, empowering employees to grow while making a meaningful impact for our customers.