Welder/Fitter

Sabre Industries

Sioux City (IA)

Presencial

USD 34 000 - 40 000

Tempo integral

Há 3 dias
Torna-te num dos primeiros candidatos

Uma candidatura completa num minuto

Currículo e carta de apresentação personalizados, prontos a enviar.

Ultrapassa os filtros ATS

Vantagens oferecidas por esta oferta de emprego

401(k) with company match
Tuition reimbursement
Life and disability coverage
Paid time off & holidays
Health and wellness resources
Employee discounts

Resumo da oferta

Sabre Industries, Inc. in Sioux City, IA is seeking a dedicated Welder for production of large pole assemblies. You will read drawings, set up welding equipment, and perform FCAW and gas welding to join components, while maintaining safety and quality standards.

As a full-time, non-exempt position, you will train in the Welder program, handle varied tasks on a fast-paced line, and contribute to continuous improvement. Competitive benefits and opportunities for growth are offered.

Qualificações

  • Must complete Welder Training Program.
  • Ability to read and interpret complex drawings and specs.
  • Must be able to lift up to 50 pounds.
  • Proficient in using measurement tools and gauges.

Responsabilidades

  • Reads and interprets drawings to determine parts needed.
  • Welds components using Flux-Cored Arc Welding or Gas Metal Arc Welding.
  • Finish welds to meet specifications and quality standards.
  • Performs visual inspection and uses weld gauge to verify weld size.

Conhecimentos

Welding
FCAW welding
Reading blueprints
Safety awareness
Manual dexterity
Lift up to 50 lbs

Formação académica

High School diploma or GED

Ferramentas

Plasma torch
Oxy-fuel torch
Weld gauge
Measuring tape

Descrição da oferta de emprego

  • Base Pay $24.50 - $29.00 / Hour
  • Job Category Production
  • Employee Type Non-Exempt

At Sabre Industries, we connect and power America’s communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time.

Our teams live out the organization’s core values of integrity, commitment, innovation, and connection. That’s how we continuously exceed our high standards of enterprise excellence—by creating a space for our engaged employees to thrive.

With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees.

Scope of Responsibility:

This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Must complete Welder Training Program.

  • Ability to plan, organize, pay attention to details and multi-task in a fast paced work environment
  • Works Independently with minimal supervision once assignments or responsibilities outlined and delegated. Displays a strong sense of ownership for work.
  • Flexible and Adaptable: Copes with ambiguity, change, and uncertainty effectively. Not hesitant to resolve lack of clarity, structure, or definition of outcomes then moves ahead.
  • Actively seeks and supports continuous improvement activities in process efficiencies, costs and effectiveness of work
  • Knowledge of general safety guidelines and Sabre’s quality expectations and application in the work place
  • Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts.
  • Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station.
  • Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds.
  • Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications.
  • Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions.
  • Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays.
  • Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts.
  • Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face.
  • Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results.
  • Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols.
  • Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature.
  • Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas.
  • Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing.
  • Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially.
  • Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size.
  • When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications.
  • Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area.
  • Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process.
  • Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity.
  • Additional duties as assigned
Position Requirements:
  • High School diploma or GED equivalent preferred
  • Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals.
  • Proficiency in reading complex prints and specifications.
  • Must know how to properly use a weld gauge.
  • Read and write.
Physical Requirement
  • Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials.
  • Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet.
  • Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times.
  • Must possess adequate dexterity and stamina to sustain expected production effectively.
  • Must be able to work in fast-paced work environment
  • Must be able to lift up to 50 pounds.
  • Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials.
  • Position requires manual dexterity, arm-hand steadiness and a safety-minded individual.
  • Must be able to work in an open environment exposed to extreme temperatures.
At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for:
  • 401(k) with Company Match
  • Continuing Education & Tuition Reimbursement
  • Life and Disability Coverage
  • Paid Time Off & Paid Holidays
  • Health and Wellness Resources
  • Employee Discounts
Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity
Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

GMAW Fitter
GMAW Fitter

Sabre Industries • Conroe (TX)

Presencial
USD 27 000 - 38 000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
Welder/Fitter C - Kenn
Welder/Fitter C - Kenn

Sabre Industries • Fort Worth (TX)

Presencial
USD 27 000 - 39 000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
Welder/Fitter A - SBSU
Welder/Fitter A - SBSU

Sabre Industries, Inc. • Bossier City (LA)

Presencial
USD 49 000 - 67 000
401(k) match
Tuition reimbursement
Life insurance
+3
Welder/Fitter A - AlvU
Welder/Fitter A - AlvU

Sabre Industries • Alvarado (TX)

Presencial
USD 32 000 - 45 000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
Welder/Fitter (Day/Night)
Welder/Fitter (Day/Night)

Sabre Industries • Hicksville Township (OH)

Presencial
USD 33 000 - 39 000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
Welder/Fitter B - MarU
Welder/Fitter B - MarU

Sabre Industries, Inc. • Marshall (TX)

Presencial
USD 25 000 - 39 000
Medical, Dental & Vision coverage
401(k) with Company Match
Continuing Education & Tuition Reimb.
+4
Welder/Fitter A - MarU
Welder/Fitter A - MarU

Sabre Industries, Inc. • Marshall (TX)

Presencial
USD 42 000 - 65 000
Medical, Dental & Vision coverage
401(k) with Company Match
Continuing Education & Tuition Reimb
+4
Welder/Fitter C - AlvU
Welder/Fitter C - AlvU

Sabre Industries, Inc. • Alvarado (TX)

Presencial
USD 42 000 - 66 000
Medical coverage
Dental & Vision coverage
401(k) match
+2
Welder/Fitter C (Days) - SBSU
Welder/Fitter C (Days) - SBSU

Sabre Industries, Inc. • Bossier City (LA)

Presencial
USD 42 000 - 66 000
Medical, Dental & Vision coverage
401(k) with Company Match
Continuing Education & Tuition Reim
+4
Welder A - SBSU
Welder A - SBSU

Sabre Industries, Inc. • Bossier City (LA)

Presencial
USD 34 000 - 39 000
401(k) with Company Match
Tuition Reimbursement
Life and Disability Coverage
+3