Welder/Fitter A - MarU

Sabre Industries, Inc.

Marshall (TX)

On-site

USD 42,000 - 65,000

Full time

30 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical, Dental & Vision coverage
401(k) with Company Match
Continuing Education & Tuition Reimb
Life and Disability Coverage
Paid Time Off & Holidays
Health and Wellness Resources
Employee Discounts

Job summary

Sabre Industries, Inc. is seeking a skilled welder to join our Large Pole department. You will perform Flux Cored Arc Welding, read blueprints, and assemble pole components on a fitter station.

Safety and quality are emphasized as you handle plasma and oxy-fuel torches, use gauges, and coordinate with material handlers. The role requires standing for long periods, lifting up to 50 pounds, and working in a fast-paced environment.

Qualifications

  • High school diploma or GED preferred.
  • Must be able to read complex prints and specifications.
  • Proficiency in reading and writing.
  • Must know how to properly use a weld gauge.
  • Basic shop mathematics including fractions, decimals, and conversions.

Responsibilities

  • Tack weld small components to form a pole assembly using Flux Cored Arc Welding.
  • Assemble pole assemblies on fitter stations; assist material handlers with loading parts.
  • Read and interpret drawings to identify required parts and layouts.
  • Measure distances and angles with tape, level, square, and angle finders; convert fractions to decimals.
  • Operate plasma and oxy-fuel torches for cutting and preheating parts.
  • Weld to required specifications and inspect welds with gauges; use gouger to repair defects if needed.
  • Load finished poles with overhead crane and maintain safe, efficient workflow.
  • Assist and instruct other welders and fitters to address quality or productivity issues.

Skills

Manual dexterity
Reading blueprints
Basic math
Welding experience

Education

High School Diploma or GED

Tools

Weld gauge
Plasma torch
Oxy-fuel torch
Overhead crane
Grinders

Job description

Brief Description

At Sabre Industries, we connect and power America’s communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time.

Brief Description

At Sabre Industries, we connect and power America’s communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time.

Our teams live out the organization’s core values of integrity, commitment, innovation, and connection. That’s how we continuously exceed our high standards of enterprise excellence—by creating a space for our engaged employees to thrive.

With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees.

Scope Of Responsibility

This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings.

Essential Duties
  • Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts.
  • Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station.
  • Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds.
  • Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications.
  • Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions.
  • Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays.
  • Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts.
  • Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face.
  • Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results.
  • Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols.
  • Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature.
  • Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas.
  • Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing.
  • Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially.
  • Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size.
  • When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications.
  • Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area.
  • Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process.
  • Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity.
Position Requirements
  • High School diploma or GED equivalent preferred
  • Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals.
  • Proficiency in reading complex prints and specifications.
  • Must know how to properly use a weld gauge.
  • Read and write.
Physical Requirement
  • Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials.
  • Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet.
  • Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times.
  • Must possess adequate dexterity and stamina to sustain expected production effectively.
  • Must be able to work in fast-paced work environment
  • Must be able to lift up to 50 pounds.
  • Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials.
  • Position requires manual dexterity, arm-hand steadiness and a safety-minded individual.
  • Must be able to work in an open environment exposed to extreme temperatures.
Benefits

At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for:

  • Medical, Dental & Vision coverage
  • 401(k) with Company Match
  • Continuing Education & Tuition Reimbursement
  • Life and Disability Coverage
  • Paid Time Off & Paid Holidays
  • Health and Wellness Resources
  • Employee Discounts

Sabre Industries is an Equal Opportunity Employer.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welder/Fitter B - MarU
Welder/Fitter B - MarU

Sabre Industries, Inc. • Marshall (TX)

On-site
USD 25,000 - 39,000
Medical, Dental & Vision coverage
401(k) with Company Match
Continuing Education & Tuition Reimb.
+4
Welder/Fitter C - AlvU
Welder/Fitter C - AlvU

Sabre Industries, Inc. • Alvarado (TX)

On-site
USD 42,000 - 66,000
Medical coverage
Dental & Vision coverage
401(k) match
+2
Welder/Fitter
Welder/Fitter

Sabre Industries, Inc. • Sioux City (IA)

On-site
USD 28,000 - 39,000
Medical, Dental & Vision coverage
401(k) with Company Match
Tuition Reimbursement
+4
Welder/Fitter A - AlvU
Welder/Fitter A - AlvU

Sabre Industries • Alvarado (TX)

On-site
USD 32,000 - 45,000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
GMAW Fitter
GMAW Fitter

Sabre Industries • Conroe (TX)

On-site
USD 27,000 - 38,000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
Welder/Fitter C (Days) - SBSU
Welder/Fitter C (Days) - SBSU

Sabre Industries, Inc. • Bossier City (LA)

On-site
USD 42,000 - 66,000
Medical, Dental & Vision coverage
401(k) with Company Match
Continuing Education & Tuition Reim
+4
Welder/Fitter A - SBSU
Welder/Fitter A - SBSU

Sabre Industries, Inc. • Bossier City (LA)

On-site
USD 49,000 - 67,000
401(k) match
Tuition reimbursement
Life insurance
+3
Welder/Fitter C - Kenn
Welder/Fitter C - Kenn

Sabre Industries • Fort Worth (TX)

On-site
USD 27,000 - 39,000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
Welder/Fitter (Day/Night)
Welder/Fitter (Day/Night)

Sabre Industries • Hicksville Township (OH)

On-site
USD 33,000 - 39,000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3
Welder/Fitter C - MarU
Welder/Fitter C - MarU

Sabre Industries • Marshall (TX)

On-site
USD 27,000 - 39,000
401(k) with Company Match
Continuing Education & Tuition Reimb.
Life and Disability Coverage
+3