Welder/Fabricator

ENTEK International

Lebanon (OR)

Presencial

USD 52.000 - 70.000

Jornada completa

14 días+

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

ENTEK is seeking a skilled Welder/Fabricator to read blueprints and build metal components at our Lebanon, Oregon facility. You will weld in TiG and MiG processes on steel, stainless, and aluminum, and perform quality checks to ensure exact specifications.

Applicants should have 5+ years of welding experience, be proficient with calipers and hand tools, and able to handle lifting and safety procedures in a manufacturing setting. A weld test (2G/3G) will be required during interviews.

Formación

  • High school diploma or GED.
  • 5+ years as a Welder/Fabricator.
  • Experience with MIG, TIG, and Fluxcore welding.
  • Ability to read and interpret engineering blueprints.
  • Fabricate metal components to produce strong, clean welds.
  • Perform quality checks and verify design specs before cutting.
  • Experience using hand and power tools, calipers, and load-moving equipment.
  • Knowledge of proper handling of propane and pressurized gas cylinders.
  • Strong time-management and self-management.
  • Ability to communicate in English.
  • Pre-employment fit-for-duty screen and drug screen.

Responsabilidades

  • Read and interpret engineering blueprints to fabricate metal components.
  • Weld using TiG and MiG techniques on steel, stainless steel, and aluminum.
  • Fabricate tanks, frames, and hoppers from sheet metal and plate.
  • Perform quality checks on finished products.
  • Complete weld tests (2G and 3G) on mild and stainless steel.
  • Operate hand and power tools and equipment safely.
  • Ensure compliance with safety and quality standards.

Conocimientos

Blueprint reading
English communication
Time management
Self-management
Quality inspection

Educación

High school diploma or GED
5+ years Welder/Fabricator experience
Trade school certificate

Herramientas

MIG welding
TIG welding
Fluxcore welding
Calipers
Load-moving equipment (pallet jack, cranes, forklift)
Propane handling safety

Descripción del empleo

Description

ENTEK is seeking applications for a talented and experienced Welder/Fabricator to build quality metal components for our clients and join us on-site at our Lebanon, Oregon location (relocation within 40 miles of Henderson is required).

As a Welder/Fabricator, you will read and interpret engineering blueprints, fabricate metal components or structures, and perform quality checks on finished products.

In this role, you will work with different welding techniques, such as TiG and MiG welding, to weld a variety of metals, such as steel, stainless steel, and aluminum, to create a range of parts and assembled equipment that meet the required specifications. You will also perform tube and pipe welding MS. You will be responsible for building simple and complex fabrications based on prints such as tanks, frames, and hoppers from sheet metal and plate.

To ensure success as an ENTEK Welder/Fabricator, you should have advanced knowledge of industrial metalwork, a good eye for detail, and excellent mathematical skills. Ultimately, a top-class metal fabricator expertly constructs high-quality products to exact specifications.

Individuals invited to interview for this role will be required to perform a weld test, which will include 2G and 3G positions on mild steel and stainless steel, using MIG, TIG, and fluxcore, on 14ga, 10ga, 3/16\" and potentially on 3/8\" and 1/2\".

About ENTEK

ENTEK’s DNA is based on a set of core values, which drive everything we do: Respect, Integrity, Innovation, and Commitment. Stop by our website at www.entek.com to learn more about our company and the opportunities that await you. ENTEK is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. ENTEK’s locations are non-smoking. Please inquire if you have questions.

Requirements
Minimum Qualifications
  • High school diploma or GED
  • 5+ years of experience as a Welder/Fabricator
  • Experience and familiarity with standard welding tools and procedures, including MIG, TIG, and Fluxcore.
  • Ability to read and interpret engineering blueprints.
  • Strong knowledge of fabricating and constructing metal components to produce strong, clean welds.
  • Initiative to perform quality checks on completed products, double-check design specifications before commencing cutting work, and test and inspect welded surfaces and structures to discover flaws.
  • Experience using various hand and power tools, calipers, and load-moving equipment (i.e., pallet jack, cranes, forklift, etc.).
  • Knowledge of proper handling of propane and pressurized gas cylinders.
  • Strong time-management skills
  • Ability to self-manage behavior
  • Ability to communicate effectively in written and spoken English
  • Satisfactory results from a pre-employment fit-for-duty screen and a drug screen
Preferred Qualifications
  • Trade school program certificate.
  • Basic computer skills.
Working Environment
  • The hours for this role are Monday- Friday, 7:00 a.m. – 3:30 PM.

This role is based in a manufacturing shop environment, which may require the employee to [work with or near equipment that uses water / high heat / mechanical means to create metal-based products. The incumbent will spend most of their 8-hour shifts on their feet. This role requires the incumbent to regularly lift and/or move up to 30 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. Incumbents will complete tasks that require finger dexterity, reaching, handling of materials and tools/and equipment, talking, and hearing, as well as near and far sight, peripheral vision, and depth perception. The individual in this role may be required to kneel, stoop, crouch, climb, and/or balance. The role may occasionally expose the employee to fumes and airborne particles, as well as temporarily high temperatures and temporarily bright light. This role requires wearing eye and hearing protection while working, including a welding helmet or hood.

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Welder/Fabricator
Welder/Fabricator

ENTEK Manufacturing LLC • Lebanon (OR)

Presencial
USD 40.000 - 60.000
Welder
Welder

Entek • Lebanon (OR)

Presencial
USD 45.000 - 60.000
Paid time off
Health insurance (medical, dental, vision)
401k
+1
Welder-Fitter Class 5
Welder-Fitter Class 5

Entek • Lebanon (OR)

Presencial
USD 50.000 - 70.000
On-Site Welder/Fabricator (TIG/MIG)
On-Site Welder/Fabricator (TIG/MIG)

ENTEK International • Lebanon (OR)

Presencial
USD 52.000 - 70.000
Welder Fitter
Welder Fitter

Entek • Lebanon (OR)

Presencial
USD 45.000 - 65.000
Talented Welder & Fabricator — TIG/MIG/STICK
Talented Welder & Fabricator — TIG/MIG/STICK

Entek • Lebanon (OR)

Presencial
USD 45.000 - 60.000
Paid time off
Health insurance (medical, dental, vision)
401k
+1
Welder / Fabricator
Welder / Fabricator

Tec Industrial • Greenville (SC)

Presencial
USD 50.000 - 70.000
Medical FSA-HSA
Vision
STD/LTD
+4
Welder - 2nd Shift
Welder - 2nd Shift

Enprotech Corp • Lansing (MI)

Presencial
USD 45.000 - 70.000
Health coverage
401(k) plan with company match
Disability & life insurance
+2
Machinist
Machinist

Entek • Lebanon (OR)

Presencial
USD 55.000 - 75.000
Paid time off
Health insurance (medical, dental, vision)
401k
+1
Senior Welder-Fitter, Class 5 - Tank Fabrication
Senior Welder-Fitter, Class 5 - Tank Fabrication

Entek • Lebanon (OR)

Presencial
USD 50.000 - 70.000