Welder/Assembler (1st Shift)

Russells Technical Products; Holland (MI); On-site; USD 28,000 - 34,000; Full time

Job summary

Russells Technical Products is seeking a Welder/Assembler for 1st shift. Responsibilities include reading drawings, selecting materials, drilling, assembling cabinet panels, installing hardware, sealing joints, and following work instructions.

Welders will operate TIG, MIG, and spot welders, ensure weld quality, and prepare parts per print specifications. On-site position with competitive hourly pay and growth opportunities.

Qualifications

• High school diploma or GED required.
• 1+ years experience with MIG/TIG and spot-welding preferred.
• Welding certification preferred.

Responsibilities

• Review drawings, prints, and work orders.
• Identify materials and components.
• Drill and punch holes.
• Assemble basic cabinet panels and sections.
• Install brackets, supports, stiffeners, and reinforcements.
• Install hinges, latches, handles, and other hardware.
• Install insulation or insulation supports as required.
• Seal seams and joints.
• Apply caulking or other sealants.
• Label and organize components for assembly.
• Prepare completed cabinet sections for the next department.
• Read, comprehend and follow department Work Instructions.
• Demonstrate setup and use of welding machines (TIG, MIG, Spot) for material type and thickness.
• Demonstrate welding technique: temperature, speed, and penetration for material type and thickness.
• Weld 304 stainless steel, 316L stainless steel, CRS, HRS, and galvanized steel as specified.
• Prepare parts and materials for welding procedures; may perform assembly tasks.
• Fabricate weldments square and true to prints.

Skills

MIG welding

TIG welding

Spot welding

Blueprint reading

Math and measuring

Welding certification

Education

High school diploma or GED

Tools

Welding machines (TIG, MIG, Spot)

Hand tools

Power tools

Job description

Welder/Assembler - 1st shift

• Review drawings, prints, and work orders
• Identify required materials and components
• Drill and punch holes
• Assemble basic cabinet panels and sections
• Install brackets, supports, stiffeners, and reinforcements
• Install hinges, latches, handles, and other hardware
• Install insulation or insulation supports as required
• Seal seams and joints
• Apply caulking or other sealants
• Label and organize components for assembly
• Prepare completed cabinet sections for the next department
• Read, comprehend and follow Department Work Instructions.
• Demonstrate the knowledge and ability to properly setup and use welding machines (TIG, MIG and Spot) for the proper material type and thickness.
• Demonstrate the knowledge and ability to identify proper welding technique required, for example, proper weld temperature, speed and penetration for the required material type and thickness.
• Demonstrate the knowledge and ability to properly weld the following normally used materials:
• 20-, 16- & 12-gauge 304 stainless steel
• 16-gauge 316L stainless steel
• 20-, 16- & 12-gauge Cold Rolled Steel (CRS)
• 7-gauge and ¼” Hot Rolled Steel (HRS)
• 3/16” Hot Rolled Steel (HRS) Angle and Channel
• 16- and 12-gauge Paintloc galvanized steel
• Demonstrate the knowledge and ability to properly prepare parts and materials for the required welding procedure. May perform some assembly functions.
• Demonstrate the knowledge and ability to correctly fabricate weldments that are square and true to the provided print(s).

Description

Welder/Assembler - 1st shift

The Responsibilities For This Position Include

• Review drawings, prints, and work orders
• Identify required materials and components
• Drill and punch holes
• Assemble basic cabinet panels and sections
• Install brackets, supports, stiffeners, and reinforcements
• Install hinges, latches, handles, and other hardware
• Install insulation or insulation supports as required
• Seal seams and joints
• Apply caulking or other sealants
• Label and organize components for assembly
• Prepare completed cabinet sections for the next department
• Read, comprehend and follow Department Work Instructions.
• Demonstrate the knowledge and ability to properly setup and use welding machines (TIG, MIG and Spot) for the proper material type and thickness.
• Demonstrate the knowledge and ability to identify proper welding technique required, for example, proper weld temperature, speed and penetration for the required material type and thickness.
• Demonstrate the knowledge and ability to properly weld the following normally used materials:
• 20-, 16- & 12-gauge 304 stainless steel
• 16-gauge 316L stainless steel
• 20-, 16- & 12-gauge Cold Rolled Steel (CRS)
• 7-gauge and ¼” Hot Rolled Steel (HRS)
• 3/16” Hot Rolled Steel (HRS) Angle and Channel
• 16- and 12-gauge Paintloc galvanized steel
• Demonstrate the knowledge and ability to properly prepare parts and materials for the required welding procedure. May perform some assembly functions.
• Demonstrate the knowledge and ability to correctly fabricate weldments that are square and true to the provided print(s).

RTP is an Equal Opportunity Employer for all protected categories under applicable law and is a drug-free workplace.

Salary: $20.00 - $25.00/hr

#ZR

Requirements

Skills required/preferred:

• Ability to read, understand and follow department work instructions.
• Basic math and measuring skills.
• Knowledge and/or experience in MIG/TIG and spot-welding techniques.
• Experience using basic hand and power tools preferred.
• High school diploma or GED.
• One or more years of experience using MIG/TIG and spot-welding techniques preferred.
• Welding certification preferred.