WELDER 1st Shift / SOLDADOR 1er Turno

Bimstore; Mitchell (SD); On-site; USD 42,000 - 54,000; Full time

Job summary

AKG North American Operations, Inc. in Mitchell, SD is seeking a Welder to operate welding equipment and attach tanks to the core according to blueprint instructions. This full-time role requires reading detailed orders, handling the core, aligning tanks, and stamping the finished cooler.

You will weld with a hand trigger, meet production quotas, maintain a clean work area, and follow all EMS policies. Spanish/English bilingual descriptions in the posting reflect the job's versatility.

Qualifications

• Proven ability to read and interpret detailed work orders and blueprints.
• Must complete formal welding training or apprenticeship.
• Experience operating welding equipment and hand triggers.

Responsibilities

• Read and understand work orders and blueprints.
• Move the core into/out of welding booth; place on turntable/skid.
• Match tanks to each side of the core per blueprint.
• Tack corners and position tanks properly.
• Operate welding equipment and perform standard welding tasks.
• Weld additional components as required by blueprint.
• Weld all sides with appropriate rod; complete wash-down.
• Document and stamp the cooler after welding.
• Meet production quotas; maintain clean, safe work area.
• Report issues to supervisor; follow EMS policies.
• Maintain regular attendance as required.

Skills

Read blueprints

Move core

Position tanks

Tack corners

Welding operations

Weld components

Use welding rod

Document stamping

Meet quotas

Safety & EMS

Attendance

Education

Formal welding trade program

Apprenticeship/ on‑the‑job training

Tools

Welding equipment

Chain hoist

Turntable/Skid

Job description

WELDER / SOLDADOR

Mitchell, SD | Full-Time | Tiempo Completo |1ER SHIFT 6AM - 2PM Monday-Friday / 1ER Turno lunes a viernes 6AM a 2PM

Description

Operate the welding equipment, to weld and attach tanks or other parts to the core, based on the blueprint instructions.

Operar el equipo de soldadura para soldar y unir tanques u otras piezas al núcleo, siguiendo las instrucciones del plano.

About The Role

Operate the welding equipment, to weld and attach tanks or other parts to the core, based on the blueprint instructions.

Sobre el Puesto

Operar el equipo de soldadura para soldar y unir tanques u otras piezas al núcleo, siguiendo las instrucciones del plano.

Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Completion of a formal trade school program with a welding concentration, apprenticeship program and/or on-the-job training by Welders at AKG North American Operations, Inc

Para realizar este trabajo con éxito, la persona debe poder cumplir bien con cada una de las tareas principales. Los requisitos que se mencionan abajo representan los conocimientos, habilidades y capacidades necesarias. Se pueden hacer adaptaciones razonables para permitir que personas con discapacidad puedan realizar las funciones esenciales del puesto. Haber terminado un programa de escuela técnica en soldadura, un programa de aprendizaje (apprenticeship) y/o capacitación en el trabajo con soldadores en AKG North American Operations, Inc.

Essential Functions

• Read and understand detailed work order instructions and blueprints.
• Move the core into and out of the welding booth, using a chain hoist if needed, and place it on the turntable or skid when welding is completed.
• Match the correct tanks to each side of the core based on blueprint instructions.
• Tack each corner of the core and use a hammer to position the tanks properly.
• Operate welding equipment using a hand trigger to control current/voltage and perform standard welding tasks.
• Weld additional components onto the core when required by blueprint instructions.
• Use the appropriate welding rod to weld all sides of the core and complete the wash-down process on each corner.
• Document and stamp the cooler once the welding process is finished.
• Meet production quotas set by the Lead or Supervisor.
• Maintain a clean and safe work environment.
• Report any issues to the Supervisor or appropriate personnel as soon as they are identified.
• Follow all policies, procedures, and requirements outlined in AKG’s Environmental Management System (EMS).
• Maintain regular physical attendance as required for this position, following AKG attendance policy in the Employee Handbook.

Funciones esenciales

• Lea y entienda las instrucciones de trabajo y los planos.
• Mueva el núcleo dentro y fuera de la cabina de soldadura, usando una grúa de cadena si es necesario, y lo coloque en la mesa o en el soporte cuando termine la soldadura.
• Coloque los tanques correctos a cada lado del núcleo según el plano.
• Fije las esquinas del núcleo y use un martillo para acomodar los tanques.
• Use el equipo de soldadura con un gatillo para controlar la corriente/voltaje y hacer trabajos básicos de soldadura.
• Suelde piezas adicionales al núcleo si el plano lo indica.
• Use la varilla adecuada para soldar todos los lados del núcleo y hacer el proceso de limpieza en cada esquina.
• Registre y marque el enfriador cuando termine el proceso de soldadura.
• Cumpla con las metas de producción establecidas por el líder o supervisor.
• Mantenga un área de trabajo limpia y segura.
• Reporte cualquier problema al supervisor o personal correspondiente de inmediato.
• Siga todas las políticas y procedimientos del sistema de gestión ambiental (EMS) de AKG.
• Mantenga asistencia física regular, como lo requiere el puesto y la política de la empresa.

Physical Demands

• Must be able to stand (95%) and walk (5%) of the time. May also be required to bend, stoop, pull, push, twist, and turn.
• Must be able to lift up to 50 lbs (100%) of the time.
• Must be able to use a pallet jack, chain hoist, wire barrel, and welding equipment.
• Must use safety equipment such as steel toe shoes, safety glasses, hearing protection, welding jacket, welding helmet, and gloves. All of these are provided by AKG, except for the steel toe shoes.

Demandas Físicas

• Debe poder estar de pie (95%) y caminar (5%) del tiempo. También puede ser necesario agacharse, inclinarse, jalar, empujar, girar y torcer el cuerpo.
• Debe poder levantar hasta 50 libras (100%) del tiempo.
• Debe poder usar un montacargas de paleta, una grúa de cadena, un tambor de alambre y equipo de soldadura.
• Debe usar equipo de seguridad como zapatos con punta de acero, lentes de seguridad, protección auditiva, chaqueta de soldadura, casco de soldadura y guantes. Todo esto es proporcionado por AKG, excepto los zapatos con punta de acero.

Disclaimer / Descargo de Responsabilidad

This job description is intended to describe the general nature and level of work. It is not an exhaustive list of all responsibilities, duties, or skills required.

Esta descripción de trabajo tiene la intención de describir la naturaleza y nivel general del trabajo. No es una lista exhaustiva de todas las responsabilidades, deberes o habilidades requeridas.