Welder

Automated Conveyor Systems

Lynchburg (VA)

On-site

USD 42,000 - 60,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Automated Conveyor Systems is seeking a Level C Welder to fit and weld mild-steel components using MIG welding techniques. The role requires steady workmanship, strict safety adherence, and the ability to produce welds that meet both visual and structural quality standards.

Responsibilities include reading blueprints, using measurement tools, and lifting up to 50 lbs. Overtime and weekend work may be required to meet ship dates; teamwork and initiative are essential in this shop environment.

Qualifications

  • 2 years minimum welding experience (on-the-job or vocational/trade school).
  • English speaking, reading and writing preferred.
  • Able to read a tape measure to 1/16 of an inch.
  • Basic math skills required.
  • Must be able to lift up to 50 lbs.

Responsibilities

  • Produce visually and structurally acceptable welds consistently.
  • Comply with safety procedures and maintain housekeeping in the welding shop.
  • Safely use hand tools, electric tools, grinders, band saws, and hydraulic presses.
  • Stand for long periods (9–10 hours per day).
  • Receive direction and apply supervisory feedback to work.
  • Possess ability to work overtime/weekends to meet ship dates.
  • Collaborate effectively with others and perform tasks with limited supervision.

Skills

Welding expertise
Blueprint reading
Tape measure reading
Safety compliance
Manual dexterity

Education

High school diploma or GED
Vocational/trade school training

Tools

MIG welding equipment
Calipers/measurement tools

Job description

Brief Description

The Level C Welder is responsible for fitting and welding mild-steel components using the MIG welding process. This position requires consistent workmanship, adherence to safety procedures, and the ability to produce welds that meet visual and structural quality expectations. Expectations for the candidate are as follows:



  • Must be able to produce a visually and structurally acceptable weld bead on a consistent basis

  • Must comply with all company policies and procedures, including safety and maintaining good housekeeping around the welding shop

  • Must be able to safely use hand tools, electric tools, and power equipment, including grinders, vertical band saws, and hydraulic presses. Must show the ability to stand for long periods of time in one area (at least 9 to 10 hours per day)

  • Must be able to safely lift up to 50 lbs. as required by assigned work

  • Must check quality standards in workmanship including but not limited to weld penetration and appearance, placement of welded pieces in conjunction with blueprint, overall satisfactory operation of machine once completed

  • Must be able to receive direction, feedback, and corrective instruction from the supervisor and apply that guidance to assigned work

  • Must be able to comply with all required hours asked to work including overtime/weekends for jobs to meet ship dates

  • Must be able to work effectively with others while also performing assigned tasks with limited supervision. This includes identifying problems, diagnosing issues, and contributing to practical solutions

  • Additional duties may be assigned by management.


Requirements

The individual must have the following basic requirements:



  • 2 years minimum experience in the welding industry. This can be on the job experience and/or vocational/trade school experience

  • High school diploma or GED candidates PREFERRED:

  • English speaking, reading and writing

  • Math skills at a minimum of a 10th grade level

  • Basic computer skills


The individual must have a sufficient working knowledge of the following:



  • Previous welding experience using 0.045” hard wire with 75/25 gas on mild steel

  • Ability to read and interpret basic welding blueprints

  • Must be able to read a tape measure to the 1/16 of an inch

  • Ability to perform basic diagnoses of welding machines and troubleshoot welder

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welder
Welder

Automated Conveyor Systems, Inc. • Lynchburg (VA)

On-site
USD 42,000 - 48,000
Welding Technician
Welding Technician

Elliott Machine Works • Galion (OH)

On-site
USD 25,000 - 39,000
Skilled Welder: Fabrication & Precision Welding
Skilled Welder: Fabrication & Precision Welding

Cwdusttech • Texas

On-site
USD 40,000 - 55,000
Welding Technician
Welding Technician

Stellar Industries • Hastings (NE)

On-site
USD 28,000 - 39,000
Welder
Welder

Cwdusttech • Texas

On-site
USD 40,000 - 55,000
Welder
Welder

Darling Ingredients Inc. • Ohio

On-site
USD 42,000 - 68,000
Welder
Welder

Whitley MFG. LLC • South Whitley (IN)

On-site
USD 43,000 - 58,000
WELDER/FITTER
WELDER/FITTER

CT&C Fabrication • Utah

On-site
USD 42,000 - 64,000
Welder
Welder

Jamco Products • South Beloit (IL)

On-site
USD 40,000 - 64,000
Welder
Welder

Alkar • Wisconsin

On-site
USD 42,000 - 66,000