Waterjet Operator 2026

McCloskey Partners, LLC; Broomall (PA); Vor Ort; USD 28.000 - 39.000; Vollzeit

Zusammenfassung

McCloskey Partners, LLC in Pennsylvania seeks a Waterjet Operator to fabricate parts from various materials using a high-pressure waterjet, following work orders and specifications. The role emphasizes precision, safety, and working in a clean environment.

Responsibilities include maintaining a clean, organized workspace, daily machine upkeep, inspecting cuts with calipers, adjusting pressure and feed rates, and using a forklift to load materials.

Qualifikationen

• Must possess strong attention to detail.
• Excellent written and verbal communication.
• Teamwork – Ability to interact with employees at all levels.
• Customer service.
• Ability to take and follow directions.
• Ability to read and understand complex Military specifications or similar documentation.
• Familiar with and able to use hand tools: tape measure, calibers, etc.
• Must read and write English.

Aufgaben

• Maintain a clean and safe workspace.
• Clean the waterjet and surrounding area; keep debris sorted and workspace organized.
• Inspect parts for cut quality and tolerances using calipers; adjust pressure and feed as needed.
• Operate the waterjet and ensure parts are clean, dry, and deburred before moving to production.
• Use forklift to load material onto the waterjet.
• Continuously improve CAD drawing speed and efficiency and seek ways to optimize jobs.

Kenntnisse

Attention to detail

Communication skills

Teamwork

Customer service

Follow directions

English reading/writing

Military specs reading

Tools

Tape measure

Calipers

Jobbeschreibung

Full time
Monday through Friday: 8:00-4:30

General Summary of Position

The Waterjet Operator is responsible for fabricating parts from a variety of materials according to work order specifications using a high-pressure waterjet cutting machine.

ESSENTIAL RESPONSIBILITIES:

• Maintain a clean and safe workspace.
• Clean the waterjet and the area around the waterjet. Utilize time machine is running to clean and sort workspace and keep ground free from debris.
• Always put leftover materials away.
• Machine components should be free from abrasive dust and mud.
• Maintain an organized workspace.
• Waterjet components are fragile and expensive. The machine operator should keep any consumable parts stored away in a safe place with identification label.
• Keep spare parts in stock and labeled, including a spare, pre-built on/off valve.
• Tools should be stored in toolbox.
• Clearly label and keep pump rebuild kits and tools separated from other tools.
• Workspace should be maintained so any back-up operators can easily find components and run machine.

• The machine operator is expected to inspect the machine every day for proper operation, and alert production manager if any irregularities are noted. Regular maintenance is expected to be performed as recommended.
• Change water filters on pump and at nozzle.
• Pump is expected to always be able to reach at least 45Kpsi. Any pressure lower than this causes increased cuts times.
• Provide clean and dry parts for inspection and shipping. Parts completed on the waterjet must be clean, dry, and deburred (if necessary) before moving to the next step of production.
• Inspect parts for cut quality and tolerance, alwayschecking the first part.
• After the first part is cut, the operator should inspect the parts to check if cutting pressure, speed, and abrasive feed-rate was appropriate. The operator should also inspect tolerances using calipers and make any necessary adjustments to achieve specified tolerance.
• Operator is expected to continuously improve skills regarding software use and CAD drawing speed and efficiency.
• Operator should continuously be seeking methods to run jobs faster. Programs can be optimized to minimize traverse times.
• Use forklift to load material onto waterjet.

KNOWLEDGE, SKILLS, AND ABILITIES:

Must possess strong attention to detail.

• Must have excellent communication skills, written and verbal communication.
• Teamwork – Ability to interact with employees at all levels.
• Customer service
• Ability to take and follow directions.
• Ability to read and understand complex Military specifications or similar documentation.
• Familiar with and able to use hand tools: tape measure, calibers, etc.
• Must read and write English.

KEY COMPETENCIES:

• Ability to focus on and meet target goals and objectives.
• Complies with all Dooley Gasket and Seal Inc. policies and procedures and PA laws.

PHYSICAL DEMANDS/WORK ENVIRONMENT:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of the job, the employee is required to sit, stand, bend, walk, squat for full workday.
• Generally works indoors, may work outside dealing with extreme heat >85 degrees, extreme cold <32 degrees.
• The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear.
• The employee may occasionally handle objects weighing up to 60 pounds.
• Walk up and down stairs frequently.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
• Load and unload material from water jet (properly complete the work order paperwork along with each project)
• Other tasks may arise from time to time, such as running a press.
• Due to the possibility of severe injuries while operating the waterjet, a zero tolerance for drug and/or alcohol use must be enforced. If the operator is suspected of being under the influence the operator will immediately be asked to consent to a screening. Positive test results will result in termination; even for a first offense.