WARP CHANGER

Mohawk Industries Inc.

Virginia

On-site

USD 22,000 - 30,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Mohawk Industries is seeking a Warp Changer (M2651) in Hillsville, VA. The role involves removing and replacing loom beams, handling beams with care, and performing routine maintenance in the weaving department.

The candidate should have prior weaving or beam operation experience, strong manual dexterity, and a commitment to safety. This full-time position requires adherence to shift schedules and safety procedures in a manufacturing environment.

Qualifications

  • Must be able to read and write as indicated on application.
  • Prior weaving or beam operation experience preferred.

Responsibilities

  • Remove/replaces loom beams using tie-in equipment and maintain loom area.
  • Check warp out paper for warp outs and prepare beams for loading.
  • Remove empty beam from loom and position it for replacement.
  • Load new loom beam and perform rack and tie of beams.
  • Grease/oil harness drives, bearings, and beam stand; clean under loom area.
  • Operate Warp Truck and beam handling equipment safely and efficiently.
  • Maintain clean and orderly work area and report safety hazards.

Skills

Reading and writing ability
Manual dexterity
Safety awareness

Education

Weaver experience

Job description

Select how often (in days) to receive an alert:

WARP CHANGER

Location: Hillsville, Virginia, United States, 24343

Find your more with Mohawk!

At Mohawk Industries, we’re committed to more – more customer solutions, more process improvements, more sustainable manufacturing and more opportunities for our people.

As a Fortune 500, global flooring leader with some of the best-known brands in the industry, Mohawk is a great place to start or develop your career with an emphasis on more of what’s important to you. Come find your “more” with Mohawk!

Position Title:

Warp Changer (M2651)

Modified By:

Human Resources

Modified Date:

04/03/2023

Department:

Weaving 6370353564

Primary Objective:

Removes/replaces loom beams using tie-in equipment. Other duties as assigned by management.

Major Function and Scope:
  • Check warp out paper for warp outs.
  • Remove empty beam from loom. After loom bolts are out of gear, use the breaker bar to spin loom over to get angle on the bolts, so they can be loosened.
  • Install loom beam by spinning loom over from FA side while using the breaker bar.
  • Take empty beam to storage area.
  • Grease/oil harness drives, bearings, and beam stand at each warp out. Clean under the loom
  • Remove oil pads from underneath tappet housing and loom, scrape grease, oil and clippings from underneath loom and tappet housing. Sweep floor, mop underneath loom, beam area and tappet housing. Put out wet floor sign and remove wet floor sign after the floor has dried.
  • Determine loom beam to be used and remove loom beam from inventory, using computer.
  • Use warp truck to transport loom beam from storage area to loom.
  • Load new loom beam in loom.
  • Rack and tie beams.
  • Break down tie frame.
  • Pull knots through drop wires, heddles and reed.
  • Repair broken ends, remove loom safety pin, start loom, and check quality.
  • Enter information in computer system.
  • Performs reties, as needed.
  • Assists personnel in drawing reeds.
  • Change battery in warp truck as needed, and at least once per shift.
  • Empty mop bucket at end of each shift.
  • Use beam gear hand truck to remove beam gear.
  • Use waste pull off machine to remove waste from beams. If waste pull off machine is not operational: pull waste from loom beam if less than 50 yards (two-person job). Cut waste off loom beam if more than 50 yards.
  • Assist Material Coordinators by staging fill yarn at looms, as needed.
  • Follow procedures for using Warp Truck down loom aisles:
  • Ensure no equipment is on the aisle that is not in use, or it has been moved at least three looms away.
  • If Warp Changers are working at a loom (tying, racking, etc..) then the looms on the left and right, and up to three looms behind, may only be leased out and clamped until.
  • The employee removing/inserting beams should start with the highest numbered loom first and then work their way down to the smallest numbered loom. (Example… 914, 906, then 905.)
  • General Duties
  • Participate in Safety programs and Neighborhood Watch.
  • Works safely and orderly.
  • Notify supervision of any hazardous or unsafe conditions.
  • Maintains clean and orderly work area.
  • Keep grease and yarn off FA and SU side of loom. Keep yarn and grease off catwalk and floor. All yarn waste must go inside the string waste can at loom.
  • Perform all necessary miscellaneous work pertaining to the above job duties.
  • Any other duties assigned by management.
  • Operates the Pull Off Machine safely and follows procedures.
EDUCATION/EXPERIENCE PREREQUISITES:

Mandatory – Must be able to read and write in manner indicated on application.

Preferred – Prior experience as a Weaver or Beamer Operator.

OTHER REQUIREMENTS:

Must be able to work assigned schedule. Must be self-motivated. Ability to legibly fill out forms/check sheets. Ability to perform mathematical calculations, such as addition and subtraction. Knowledge of weaving procedures, quality assurance standards and product specifications. Ability to learn job specific computer skills. Ability to obtain powered industrial equipment license. Must complete basic weaver training.

SUPERVISION RECEIVED:

Reports to the Shift Supervisor and works with minimum amount of supervision.

DIRECTION EXERCISED:

Limited to personal activities required to perform job duties.

Competencies:
  • Must maintain high standards for work quality and safety.
  • Must be able to determine and execute work priorities to maximize production and minimize machine down time.
  • Must be able to communicate clearly and effectively with other members of the Weaving team, including Loom Fixers and other Technicians, Weavers, and Material Coordinators.
  • Knowledge of job-related safety requirements.
  • Ability to safely operate weaving machines, including starting and stopping the machine, threading yarn breaks, Drop wires and drop wire plugs and tying knots.
  • Must be able to work independently and as a member of a two, three or four-person team.
  • Must be able to follow a series of complex and specific steps to rack and tie correctly.
  • Basic computer knowledge to enter data into inventory tracking software.
  • Ability to trouble shoot and take steps to correct issues and maximize efficiency.
  • Ability to perform detailed work with yarn, including placing ends correctly through a series of small openings.
Associates Supervised:

0

Other Pertinent Job Information:

PHYSICAL REQUIREMENTS (Frequency – Amount – Description)

STANDING / WALKING:

Ability to stand and walk continuously for up to twelve (12) hours during a twelve (12) hour shift.

SITTING:

Ability to sit for a short period of time on powered industrial truck.

MOVING SELF:

Moves throughout weaving department continuously during a twelve (12) hour shift.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Loom Maintenance Mechanic
Loom Maintenance Mechanic

BGF Industries, Inc. • Cheraw (SC)

On-site
USD 28,000 - 41,000
Loom Maintenance Mechanic
Loom Maintenance Mechanic

BGF Industries, Inc • Cheraw (SC)

On-site
USD 30,000 - 45,000
Loom Operator
Loom Operator

Phifer Incorporated • Tuscaloosa (AL)

On-site
USD 28,000 - 35,000
MENDER-INSPECTOR
MENDER-INSPECTOR

Mohawk Industries Inc. • Hillsville (VA)

On-site
USD 19,000 - 30,000
Weaver - (3rd shift)
Weaver - (3rd shift)

Greenwood Mills Inc • Greenwood (SC)

On-site
USD 19,000 - 28,000
Bridgeport Weaver
Bridgeport Weaver

Engineered Floors LLC • Bridgeport (AL)

On-site
USD 22,000 - 30,000
2nd Shift Loom Technician
2nd Shift Loom Technician

Interstate Narrow Fabrics • Haw River (NC)

On-site
USD 32,000 - 52,000
3rd Shift Loom Technician
3rd Shift Loom Technician

Interstate Narrow Fabrics • Haw River (NC)

On-site
USD 40,000 - 55,000
1st shift (7am-3pm) training
Dornier Weaver
Dornier Weaver

TenCate Protective Fabrics • Zebulon (GA)

On-site
USD 36,000 - 54,000
BEAMER OPERATOR
BEAMER OPERATOR

Mohawk Industries • Hillsville (VA)

On-site
USD 21,000 - 32,000