Warehouse Clerk / Material Handler

Ccsdualsnap; Phoenix (AZ); Vor Ort; USD 33.000 - 42.000; Vollzeit

Zusammenfassung

Custom Control Sensors, LLC in Phoenix, AZ is seeking a Warehouse Clerk / Material Handler to join our Supply Chain team. This full-time, non-exempt role supports material storage, picking, kitting, and delivery to work orders, while maintaining inventory accuracy and proper traceability.

The ideal candidate has a high school diploma or GED, 1+ year of warehouse experience, and the ability to operate a forklift and handheld scanning equipment. OSHA safety rules apply.

Qualifikationen

• High school diploma or GED required.
• 1+ year warehouse experience preferred.
• Experience with MRP inventory transactions and cycle counting.
• Ability to lift 50 pounds and stay on feet during shift.

Aufgaben

• Put away received material and record transactions so system location matches physical location.
• Maintain part identification, lot and serial traceability, and FIFO rotation.
• Pick and kit material to work orders; deliver to production on schedule.
• Perform cycle counts and investigate variances; ensure real-time inventory accuracy.
• Operate forklifts and handheld scanning equipment safely following certification and training.

Kenntnisse

Attention to Detail

Reading BOMs

Shop Math

Inventory Control

Ausbildung

High School Diploma or GED

Tools

Forklift Certification

Handheld Scanning Equipment

MRP Inventory System

Jobbeschreibung

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Warehouse Clerk / Material Handler

Full Time Indirect Arizona, Phoenix, AZ, US

30+ days ago Requisition ID: 1091

Job Title:Warehouse Clerk / Material Handler

Department:Supply Chain

Reports To:Supply Chain Manager

Location:Phoenix, AZ

Employee Type:Full Time, Non-Exempt

Education:High school diploma or GED required

Experience:1+ year warehouse or stockroom

COMPANY OVERVIEW

Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the DUAL-SNAP action disc spring principle pioneered by Custom Control Sensors.

CCS' Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets, including original PMA parts for commercial and business aviation platforms. CCS' Industrial Division provides pressure and temperature switches, sensors and transmitters for process control in oil and gas, petro-chemical, power generation, steel, tire, automotive, medical and other industrial applications.

CCS is an ISO 9001 and AS9100 certified company. Industrial product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-oriented company focused on building an energetic and vibrant work environment where one person can make a great impact on our company's success.

BENEFITS

• Medical
• 401k with Match
• Employer funded Life Insurance, Long-term Disability, and Short-term Disability
• Paid Vacation
• Paid Holidays

JOB DESCRIPTION

The Warehouse Clerk and Material Handler controls the stockroom and moves material to where production needs it. The position stores, picks, kits, and delivers material to work orders, maintains inventory accuracy through disciplined transactions and cycle counting, and keeps the stockroom in a condition where anything can be found and trusted.

Due to the traceability requirements of CCS products, the position exercises judgment in identification, lot and shelf life control, handling of sensitive material, and the immediate reporting of any discrepancy between physical material and the system.

KEY RESPONSIBILITIES

Material Storage and Control:

• Put away received material to the correct location and record the transaction so that the system location matches the physical location.
• Maintain part identification, lot and serial traceability, and first in first out rotation on all material.
• Manage shelf life controlled material and remove expired material from available inventory before it can reach a work order.
• Handle ESD sensitive and delicate components using the required protective practices.

Picking, Kitting and Delivery:

• Pick and kit material to work orders complete and on time, verifying part, revision, and quantity against the bill of material.
• Report shortages at the time of kitting rather than delivering an incomplete kit to the floor.
• Deliver material to production, machining, and assembly areas on the schedule the floor needs it.
• Process material returns from the floor and restock accurately.

Inventory Accuracy:

• Perform cycle counts on the assigned schedule, research variances, and report root causes rather than only adjusting the number.
• Complete every MRP transaction at the time of the physical move so that inventory data is accurate in real time.
• Support physical inventory and inventory reconciliation activity.
• Identify excess, obsolete, and unidentified material and route it for disposition.

Housekeeping, Safety and Compliance:

• Maintain the stockroom, staging areas, and aisles in ordered, labeled, and 5S condition.
• Operate forklifts, pallet jacks, and other powered equipment safely and only with current certification.
• Follow all AS9100 and ISO 9001 procedures, work instructions, and revision controls applicable to material handling.
• Comply with ITAR and export control requirements and all safety and personal protective equipment requirements.

COMPETENCIES

The ten competencies below define successful performance in this position.

• Inventory Accuracy Ownership.Treats system accuracy as part of the job, transacts at the time of the move, and researches variances rather than absorbing them.
• Picking and Kitting Accuracy.Delivers the right part, revision, and quantity to the right work order, and flags shortages before the kit reaches the floor.
• Material Identification and Traceability.Maintains identification, lot control, shelf life, and FIFO discipline without exception.
• Stockroom Organization.Keeps locations labeled, ordered, and findable so that anyone can locate material without help.
• Responsiveness to Production.Gets material to the floor on the timing production actually needs, and communicates when that is at risk.
• Attention to Detail.Catches the wrong revision, the damaged part, and the count that does not match before it moves downstream.
• Attendance.Is present, on time, and ready to work as scheduled. Follows call-in and time reporting requirements and manages planned time off so that commitments to the team and the customer are not put at risk.
• Culture.Lives the CCS values in daily work. Treats people with respect, communicates directly and without gossip, supports decisions once they are made, and contributes to an environment where people can do their best work.
• Safety.Works safely and protects others. Follows all safety rules, procedures, and personal protective equipment requirements, reports hazards, incidents, and near misses immediately, and does not take shortcuts under pressure.
• Compliance.Follows CCS policies, procedures, and the requirements of the quality and export control systems that govern the work. Completes required training, keeps accurate records, and raises concerns rather than working around a requirement.

SKILLS AND REQUIREMENTS

• Must be a US Person as defined by ITAR (22 CFR 120.15) due to the export controlled nature of CCS products and technical data.
• High school diploma or GED required.
• One or more years of warehouse, stockroom, or material handling experience in a manufacturing environment preferred.
• Experience with MRP inventory transactions and cycle counting.
• Forklift certification required or the ability to obtain it within 30 days of hire.
• Ability to read and interpret bills of material, pick lists, part numbers, and revision levels.
• Basic shop math and counting accuracy.
• Experience in an AS9100 or ISO 9001 environment preferred.
• Basic computer skills including email and handheld scanning equipment.
• Ability to lift 50 pounds and to stand and move throughout the shift.

PHYSICAL REQUIREMENTS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand, walk, use hands and fingers, carry, climb, bend, reach, turn, twist, push, and pull, talk or hear, and move within the areas of the facilities, warehouse, dock and parking lots. The employee frequently lifts and/or moves up to 50 pounds and occasionally moves heavier material with the assistance of a forklift, pallet jack, or another person. The employee works on and around powered industrial equipment and stands on concrete surfaces for extended periods. A computer and handheld scanning equipment are used to access, input, and retrieve data. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception, and the ability to adjust and focus.

EQUAL EMPLOYMENT OPPORTUNITY

EEO M/F/D/V

Custom Control Sensors, LLC is an Equal Opportunity Employer. It is the policy of CCS to provide equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable federal, state, or local law. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination.

**NO OUTSIDE RECRUITMENT OR STAFFING AGENCIES**