Walk-in Sand/Shotblaster - Deer Creek (Portland, OR)

Precision Castparts Corp.

Milwaukie (OR)

Sur place

USD 36 000 - 55 000

Plein temps

Il y a 4 jours
Soyez parmi les premiers à postuler

Une candidature complète en une minute

Un CV et une lettre de motivation personnalisés, prêts à envoyer.

Passez les filtres ATS

Résumé du poste

Precision Castparts Corp. in Milwaukie, Oregon is seeking a dedicated blast technician to operate walk-in sandblast and shotblast equipment in a heavy manufacturing environment.

You will load castings, direct sand or shot with handheld nozzles, inspect parts for uniform color and cleanliness, and ensure all material is prepared for downstream chemical milling or inspection. The job emphasizes safety, equipment maintenance, and adherence to production standards.

Qualifications

  • Cleaning and blasting skills demonstrated by competent performance.
  • Ability to work independently.
  • Ability to follow instructions and read technique cards.
  • Ability to perform basic mathematical calculations.
  • Physical ability to perform essential job functions.

Responsabilités

  • Load castings into walk-in cabinet manually or with hoist.
  • Masks tooling points as needed.
  • Sand or shot blasts parts in cabinet with handheld nozzles.
  • Ensure removal of sand/shot from part cavities for cleanliness.
  • Visually inspect blasted parts for uniform color and cleanliness.
  • Operate sand or shotblast machine from outside cabinet by foot control.

Connaissances

Cleaning/Blasting
Independent worker
Read technique cards
Math calculations
Physical ability

Outils

Walk-in Sandblast Equipment
Walk-in Shotblast Equipment
Forklift
Hoists
Pallet jacks
Chisels

Description du poste

  • Country: United States of America
  • State / County: Oregon
  • City: Milwaukie
  • Division: Structurals
  • Company: Deer Creek (DCA)
  • Function: Operations
  • Workplace Type: On-Site
  • Position type: Full Time
  • Opportunity ID: 24707
MISSION

To clean the surfaces of large castings using air-propelled sand or shot in a walk-in booth. To prepare casting surfaces for further cleaning, chemical milling, inspection or gate removal. Walk-in Shotblasters remove shell materials and Walk-in Sandblasters prepare casting surfaces for further inspection.

PRINCIPAL ACCOUNTABILITIES
1. Blast Operations

Objective: to remove shell, scale, grinding marks and other material from castings.

  • A. Verifies lot, part identification and operation number.
  • B. Loads castings into walk-in cabinet manually or with hoist.
  • C. Masks tooling points as needed.
  • D. Sand or shot blasts parts in cabinet by directing hand-held nozzles; moves nozzle across surface or parts; avoids taking off too much metal by not directing sand or shot at one area too long.
  • E. Removes all sand or shot out of part cavities to assure clean parts for chemical milling or subsequent operations.
  • F. Visually inspects blasted parts to verify removal of materials and uniform color of parts.
  • G. Removes castings from walk-in cabinet and places on pallets.
  • H. Modifies shotblast pipe as necessary. (Walk-in Shotblasters only)
  • I. Manually pushes sand into grate to circulate. )

J. Operates sand or shotblast machine from outside cabinet by foot control.

2. Maintenance and Cleaning

Objective: to maintain equipment in good working order and maintain clean work area.

  • A. Performs minor equipment maintenance, including changing hoses and nozzles.
  • B. Checks equipment and checks for leaks and clogs.
  • C. Restocks cabinet with sand or shot; orders materials as needed.
3. Safety

Objective: to take responsibility for and demonstrate safe work practices.

NOTE: for job positions that require respiratory protection (more than a filtering face piece - dust mask):

In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I 1910.134 and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120 (333-120-300 through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if the person is not able to work under these conditions. Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted.

  • A. Adheres to plant and department safety rules.
  • B. Safely operates all equipment and tools.
  • C. Identifies and reports safety problems.
  • D. May be required to work with hazardous waste.
4. Meets all production and quality standards.
OTHER (MARGINAL) ACCOUNTABILITIES

5. Performs other tasks as directed.

ESSENTIAL EQUIPMENT, VEHICLES, MACHINERY AND/OR TOOLS USED.
  • 1. Walk-in Shotblast Equipment
  • 2. Walk-in Sandblast Equipment
  • 3. forklift
  • 4. hoists
  • 5. pallet jacks
  • 6. slings, straps, chains
  • 7. basic hand tools (e.g. hammers, wrenches, screwdrivers, etc.)
  • 8. dental mirrors and picks
  • 9. chisels
  • 10. knives
  • 12. pipe benders and threader
  • 13. belt grinder
  • 14. brooms and shovels
  • 15. flashlights and flexlights
  • 16. magnets
  • 17. ladders
TRAINING
  • 1. Training is provided on the job.
  • 2. PCC's Forklift Driving Safety Certification must be completed.
  • 3. May be required to complete Hazardous Waste Management Training.
  • 4. Radiation Safety Training must be completed.
QUALIFICATIONS
  • 1. Cleaning and blasting skills as demonstrated by the competent performance of all Sandblaster and Shotblaster duties are preferred OR An equivalent combination of classroom training and work experience.
  • 2. Ability to work independently.
  • 3. Ability to follow instructions and read Technique Cards or routers.
  • 4. Ability to perform mathematical calculations. (addition, subtraction)
  • 5. Physical ability to perform the essential job functions.

Employees in these positions operate either the Walk-in Sandblaster or the Walk-in Shotblaster.

National Security and Export Controls

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

About PCC

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

Obtenez votre examen gratuit et confidentiel de votre CV.

ou faites glisser et déposez votre fichier ici.

Similar jobs

Postes similaires à comparer

Walk-in Sand/Shotblaster LPC LSBS 52
Walk-in Sand/Shotblaster LPC LSBS 52

Precision Castparts Corp. • Portland (OR)

Sur place
USD 25 000 - 39 000
Shell Removal Operator SSBO
Shell Removal Operator SSBO

Precision Castparts Corp. • Oregon

Sur place
USD 42 000 - 60 000
Sandblaster (1st Shift)
Sandblaster (1st Shift)

Precision CastParts • San Leandro (CA)

Sur place
USD 30 000 - 34 000
80 hours paid time off per year
10 paid holidays
Medical, dental, vision, and basiclife
TiAl Gate Removal Operator - Deer Creek (Portland, OR)
TiAl Gate Removal Operator - Deer Creek (Portland, OR)

Precision Castparts Corp. • Milwaukie (OR)

Sur place
USD 30 000 - 39 000
Shell Removal Operator LPCT 841
Shell Removal Operator LPCT 841

Precision Castparts Corp. • Portland (OR)

Sur place
USD 36 000 - 60 000
TiAl Gate Removal Operator - Deer Creek (Portland, OR)
TiAl Gate Removal Operator - Deer Creek (Portland, OR)

Precision Castpart • Salem (OR)

Sur place
USD 42 000 - 65 000
TiAl Gate Removal Operator - Deer Creek (Portland, OR)
TiAl Gate Removal Operator - Deer Creek (Portland, OR)

Precision Castparts Corp. • Milwaukie (OR)

Sur place
USD 28 000 - 39 000
Forklift Safety Certification Training
Hazardous Waste Training
Radiation Safety Training
+1
Finisher/Rotofiler - 1st Shift
Finisher/Rotofiler - 1st Shift

Precision Castparts Corp. • Groton (CT)

Sur place
USD 26 000 - 39 000
Quarterly Cash Bonus
Overtime opportunities
401(k) plan
+1
Reclaim Operator
Reclaim Operator

Precision Castparts Corp. • Henderson (NV)

Sur place
USD 25 000 - 39 000
Bench Grinder- 6p to 6a
Bench Grinder- 6p to 6a

Precision Castparts Corp. • Crooksville (OH)

Sur place
USD 21 000 - 34 000