UT Supervisor - 1st Shift

MISTRAS Group, Inc.

Ellabell (GA)

On-site

USD 65,000 - 95,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

MISTRAS Group, Inc. in Ellabell, GA is seeking a Supervisory Ultrasonic Testing (UT) professional. You will supervise UT technicians, plan inspection workflows, and oversee aerospace material inspections to ensure compliance with NAS 410 and customer requirements.

You will verify equipment setup, interpret UT indications, and maintain records while coaching staff and coordinating qualification activities. The role emphasizes safety and continuous improvement within a dynamic production

Qualifications

  • High school diploma or equivalent; documented NDT training and experience to meet employer requirements.
  • Current UT Level II certification with records; ability to obtain/maintain under NAS 410 and customer requirements.
  • Experience performing UT inspections of aerospace materials or components and interpreting results against acceptance criteria.
  • Prior lead or supervisory experience, including assigning work and coordinating inspection priorities.
  • Ability to read drawings, procedures, specs, and maintain traceability of inspection data.
  • Knowledge of UT equipment, transducers, reference standards, calibration and data reporting software.
  • Strong communication, organization, problem-solving, and team leadership; able to work with cross-functional teams.
  • Ability to meet vision and certification requirements per written practice.

Responsibilities

  • Supervise UT technicians and trainees; assign work, monitor performance, and set daily priorities.
  • Plan inspection workflow with Operations and Quality to meet delivery commitments while maintaining controls and traceability.
  • Perform and oversee ultrasonic inspections of aerospace materials, components, and assemblies within certification scope.
  • Verify equipment setup, calibration and standardization, reference standards, system performance checks before work begins.
  • Interpret UT indications against acceptance criteria; ensure inspection reports and data are complete and traceable.
  • Escalate technical questions and procedure changes to Level III and Quality; ensure proper documentation.
  • Coach technicians, coordinate on-the-job training, and maintain training and experience records; support qualification activities.
  • Monitor equipment condition, calibration status, and coordinate repairs or technical support.
  • Support audits and track workload, turnaround time, and team performance to improve operations.
  • Enforce safety, housekeeping, and PPE practices; report hazards and quality concerns promptly.

Skills

Leadership
Communication
Problem-solving
Team leadership

Education

High school diploma or equivalent
UT Level II certification

Tools

UT equipment
Transducers
Reference standards
Calibration procedures
Data acquisition software

Job description

GA - Ellabell - 518
Ellabell, GA 31308, USA



  • Shop & Aerospace

  • Full-Time

  • Requisition #: EMPLO006920


Description


  • Supervise UT technicians and trainees; assign work, coordinate staffing and shift coverage, monitor performance, and communicate daily priorities and expectations.

  • Plan inspection workflow with Operations and Quality to meet customer delivery commitments while maintaining required inspection controls and product traceability.

  • Perform and oversee ultrasonic inspections of aerospace materials, components, and assemblies within the scope of current certification and employer authorization.

  • Verify equipment setup, calibration and standardization, reference standards, system performance checks, and inspection parameters against approved instructions before work begins.

  • Interpret and evaluate UT indications against specified acceptance criteria; verify inspection reports, scan data, and records are complete, accurate, and traceable.

  • Ensure personnel use current drawings, specifications, and approved techniques. Escalate technical questions, procedure changes, and indications outside established criteria to the designated Level III and Quality.

  • Identify and control nonconforming material, stop or hold affected work when requirements are not met, and support investigations and corrective actions through the quality process.

  • Coach technicians, coordinate on-the-job training, and maintain training and experience records. Support qualification and certification activities under the company written practice and designated Level III oversight.

  • Monitor equipment condition, calibration status, consumables, and maintenance needs; troubleshoot inspection issues and coordinate repairs or technical support.

  • Support internal and customer audits, review inspection records, and implement assigned corrective actions. Track workload, turnaround time, rework, and team performance to improve operations.

  • Enforce safety, housekeeping, equipment handling, and foreign object damage prevention practices; promptly report hazards, incidents, and quality concerns.


Required Qualifications


  • High school diploma or equivalent, with documented NDT training and experience sufficient to meet the applicable employer qualification requirements.

  • Current or previous UT Level II certification, with supporting training, experience, and examination records; ability to obtain and maintain employer UT Level II certification under the company written practice, NAS 410, and applicable customer requirements before independently performing or accepting inspections.

  • Demonstrated experience performing ultrasonic inspections of aerospace materials or components and interpreting inspection results against approved acceptance criteria.

  • Prior lead or supervisory experience, including assigning work, training technicians, monitoring performance, and coordinating inspection priorities.

  • Ability to read engineering drawings, inspection procedures, specifications, and work instructions, and to maintain accurate inspection and traceability records.

  • Working knowledge of UT equipment, transducers, reference standards, calibration and standardization practices, and relevant data acquisition or reporting software.

  • Strong communication, organization, problem-solving, and team leadership skills; ability to work effectively with production, engineering, quality, and customer representatives.

  • Ability to meet and maintain applicable vision and other certification requirements specified by the employer written practice.


Preferred Qualifications


  • UT Level III certification or documented progress toward Level III qualification.

  • Experience with immersion UT, automated scanning, phased array UT, or through‑transmission techniques relevant to the division’s work.

  • Experience inspecting aerospace composites, bonded structures, forgings, castings, or machined components.

  • Familiarity with aerospace quality systems, AS9100 requirements, Nadcap NDT audit preparation where applicable, and customer‑specific inspection requirements.

  • Technical degree or formal education in NDT, materials science, engineering technology, or a related field; certification in additional NDT methods.


Work Environment and Physical Requirements

Work is performed in a laboratory or production inspection environment and may include standing, walking, repetitive equipment operation, and handling inspection equipment and components. The role requires the ability to perform essential duties with or without reasonable accommodation, follow required PPE and safety practices, and support overtime or alternate shifts as operational needs require.


MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At‑Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative.


Note to Applicants:


Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law.


Rhode Island Applicants: The Company is subject to Chapters 29‑38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law.


Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.


Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100.


Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:


Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

UT Supervisor - 1st Shift
UT Supervisor - 1st Shift

MISTRAS Group • Ellabell (GA)

On-site
USD 70,000 - 90,000
Traveling - IMUT Level II Technician (Immersion-UT Level II)
Traveling - IMUT Level II Technician (Immersion-UT Level II)

Mistras Group, Inc.-Shop • Houston (TX)

On-site
USD 65,000 - 95,000
Traveling - IMUT Level II Technician (Immersion-UT Level II)
Traveling - IMUT Level II Technician (Immersion-UT Level II)

Mistras Group Inc. • Houston (TX)

Remote
USD 52,000 - 62,000
NDT Trainee
NDT Trainee

MISTRAS Group • New Kensington

On-site
USD 32,000 - 52,000
NDT UT/MT/PT/VT II Technician - Waterford, CT
NDT UT/MT/PT/VT II Technician - Waterford, CT

Mistras Group Inc. • Waterford (CT)

On-site
USD 47,000 - 58,000
Health benefits
Paid time off
Company paid training
+1
Multi-Method NDT Technician (UT/MT/PT/VT) - Level II
Multi-Method NDT Technician (UT/MT/PT/VT) - Level II

Ropeworks • Memphis (TN)

Hybrid
USD 42,000 - 62,000
Comprehensive health benefits
Generous paid time off and training
401K savings with company match
NDT UT II Shear Wave (SWUT) Technician Savannah, GA
NDT UT II Shear Wave (SWUT) Technician Savannah, GA

MISTRAS Group • Savannah (GA)

On-site
USD 60,000 - 80,000
Health benefits after 30 days
Paid time off
Company paid training
+2
UT Level II Technician (Immersion & Composite)
UT Level II Technician (Immersion & Composite)

Mistras Group, Inc.-Shop • New Kensington

On-site
USD 39,000 - 55,000
NDT Trainee
NDT Trainee

Mistras Group, Inc.-Shop • Cudahy (CA)

On-site
USD 25,000 - 30,000
UT Level II Technician (Immersion & Composite)
UT Level II Technician (Immersion & Composite)

Ropeworks • New Kensington

On-site
USD 55,000 - 85,000