UPH FINISHER

Vanguard Furniture Company; Conover (NC); On-site; USD 36,000 - 48,000; Full time

Job summary

Vanguard Furniture Company in Conover, NC seeks an UPH Finisher to finish whitewood frames using lacquer and stain per color specs; requires ability to read tickets and follow finish specs; position involves lifting frames, operating spray gun, and maintaining safety.

Essential: knowledge of finishing processes; English reading; able to stand 8+ hours; physical demands; indoor environment.

Qualifications

• Knowledge of finishing processes including lacquer and stain.
• Ability to learn quickly and recognize parts.
• Understand correct placement of parts, right/left, front/back.
• English required for reading tickets and instructions.
• Able to set up materials in pots.
• Able to follow a finish specification.

Responsibilities

• Pull frames from the schedule and verify correct finish.
• Lift frames onto finishing table.
• Apply finish with spray gun per specifications.
• Wipe or brush excess stain as needed.
• Sand frames to prep surfaces.
• Apply lacquer to preserve finish.
• Inspect for runs or imperfections.
• Move finished frames to inspection area.
• Maintain clean, organized workstation and safety.
• Report safety hazards to supervisor.
• Perform any other duties as assigned.

Skills

Finishing

Learn quickly

Part recognition

English

Tools

Spray gun

Glue gun

Screwdriver

Hammer

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

UPH FINISHER

Conover, NC, US

27 days ago Requisition ID: 1271

Position Summary:Finishes whitewood frame with lacquer and stain to specified color and/or finish utilizing knowledge of wood properties and finish.

Position Responsibilities:

• Use schedule to pull frames. Read tickets and/or job notes prior to finishing verifying correct finish.
• Lift frame onto finishing table.
• Apply correct finish by following specifications by using a spray gun.
• May wipe excess stain and/or hand brush excess stain.
• Use sand paper to scuff frames if needed.
• Ability to apply lacquer to preserve finish.
• Ability to apply stain to preserve finish.
• Apply correct finish using color panels and formulas.
• Inspects frames for runs and/or other imperfections.
• Remove frame from table and push to Frame Inspection.
• Perform all duties safely and report any safety hazards to your immediate supervisor; including techniques for grounding / bonding where needed; ensuring filters changed according to schedule and need.
• Complete other assigned duties as directed by supervisor.
• Maintains neat and orderly work station; keeps equipment clean.
• Wear required safety glasses and work shoes; works safely and reports unsafe conditions to Dept. Supervisor. Also performs required stretching exercises.
• Performs other duties as required by supervisor.

Essential Skills and Experience:

• Must be knowledgeable in finishing processes including lacquer and stain.
• Must have ability to learn quickly and recognize parts.
• Understand correct placement of parts, right / left sides, front / back.
• English required for reading tickets and instructions.
• Must be able to setup materials in pots.
• Must be able to understand and follow a finish specification for use of correct materials.

Valued but not Required Skills and Experience:

• Previous knowledge of furniture finishing.

Physical demands and work environment:

• Lift / Carry: Frequently lifting 35 – 50 lbs. onto and off work station; occasionally lifting in excess of 50 lbs.; team lift greater weights. Must be able to lift/remove frame from work table.
• Standing / Walking: Must be able to stand and walk consistently during the 8+ hour day.
• Reach / Handle / Grasp/Feel: Repetitive use of hands required. Must be able to use spray gun entire shift.
• Bend / Lift / Stoop: Gathering supplies throughout day from various heights.
• Push/Pull: Must be able to push frames into designated work zones; or pull with designated tow tool.
• Environment: Indoors, controlled airflow, depending on building may or may not be air conditioned.
• Climbing: Must be able to climb up/down ladders between 2 – 8 feet tall using 3 point contact method to reach various heights requiring sanding or finishing or to clean booth and change out filters.
• Tool Usage: Required to use glue gun, spray gun, rubber mallet, hammer, screw driver, channel locks, adjustable wrenches, and other sanding/finishing tools for entire shift. Use brass scraper to clean booths. Must use wash basin to clean tools.
• Automation: Provided scissor lift for positioning in some booths.
• Color Determination: Must distinguish colors and finishes for match, accuracy and quality.
• Near Acuity: Requires close vision of less than 3 feet, with or without corrective lenses, for precision.