Toolmaker

CCL Industries; Hermitage (Mercer County); On-site; USD 42,000 - 66,000; Full time

Job summary

CCL Industries in Hermitage, PA is seeking a skilled machinist to interpret drawings, set up machine tools, and produce parts within tight tolerances. The role involves CNC operation, tool selection, and maintaining precision finishes while following safety procedures.

You will work under supervision of the Machine Shop and Production Supervisors, performing break-down repair support and shop floor duties as needed. High school diploma or GED required; journeyman level preferred.

Qualifications

• Journeyman machinist or equivalent.
• Experience in operating CNC equipment.
• Able to program machines as per required.
• Ability to work without direct supervision.

Responsibilities

• Receives instructions, prints and work orders.
• Interprets drawings, sketches, and determines working procedure.
• Perform work layout and makes sketches of parts as required.
• Calculates and determines dimensions, tapers and other data using shop formulas and handbooks.
• Make sure required tooling and material is in stock and order as per procedure.
• Selects and grinds tools in accordance with hardness, machine ability and other properties of the parts to be machined.
• Procures and makes jigs, fixtures or machine attachments required for the job.
• Sets up and operates machine tools, adjust stops, feeds, and speeds for efficient machining.
• Machines parts to precision tolerances (.01mm or less) and specified finishes.
• Uses precision measuring instruments.
• Dismantles machinery and equipment, assembles fits, aligns, and readjusts machinery and equipment to very close tolerances.
• Works in shop floor as required.
• Works under the direction of the Machine Shop, Production Supervisors and Process Engineers.
• Practices effective safety procedures.
• Other related duties as assigned.

Skills

Journeyman machinist

CNC equipment

Machine programming

Independent work

Education

High school diploma or GED

Job description

Summary: Making tool and parts as per requisition, support shop floor. Assist Maintenance and Production department with break down by making parts and troubleshooting.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. This list is not all inclusive and may include other duties, as necessary.

• Receives instructions, prints and work orders.
• Interprets drawings, sketches, and determines working procedure.
• Perform work layout and makes sketches of parts as required.
• Calculates and determines dimensions, tapers and other data using shop formulas and handbooks.
• Make sure required tooling and material is in stock and order as per procedure.
• Selects and grinds tools in accordance with hardness, machine ability and other properties of the parts to be machined.
• Procures and makes jigs, fixtures or machine attachments required for the job.
• Sets up and operates machine tools, adjust stops, feeds, and speeds for efficient machining.
• Machines parts to precision tolerances (.01mm or less) and specified finishes.
• Uses precision measuring instruments.
• Dismantles machinery and equipment, assembles fits, aligns, and readjusts machinery and equipment to very close tolerances.
• Works in shop floor as required.
• Works under the direction of the Machine Shop, Production Supervisors and Process Engineers.
• Practices effective safety procedures.
• Other related duties as assigned.

DEVELOPMENTAL SKILLS

To successfully perform this job, an individual must obtain certain skills, which will allow him/her to enhance the necessary work performance in relation to the essential duties and responsibilities.

It is essential that this individual possess the following skills. He/she must exercise excellent communication and interpersonal skills, utilize good judgement in making decisions and effectively delegate authority to others.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed representative of the knowledge, skill and/or ability required.

• Journeyman machinist or equivalent; demonstrable ability to operate all machine ship/tool and die equipment in an accomplished manner.
• Experience in operating CNC equipment.
• Able to program machines as per required.
• Ability to work without direct supervision.

EDUCATION and/or EXPERIENCE

High school Diploma or GED equivalence.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee required to stand, walk and use hands to finger, hands or feet. The employee is occasionally required to sit, reach with hands and arms, twist/turn, stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision and ability to adjust one's focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

While performing the duties of this job, the employee is occasionally exposed to wet humid or cold conditions, moving mechanical parts, chemicals, and extreme heat.

The noise level in the work environment is usually quiet to loud depending on work location

Location

One Llodio Drive, Hermitage , Pennsylvania 16148 , United States

Job Summary & Requirements

Summary: Making tool and parts as per requisition, support shop floor. Assist Maintenance and Production department with break down by making parts and troubleshooting.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. This list is not all inclusive and may include other duties, as necessary.

• Receives instructions, prints and work orders.
• Interprets drawings, sketches, and determines working procedure.
• Perform work layout and makes sketches of parts as required.
• Calculates and determines dimensions, tapers and other data using shop formulas and handbooks.
• Make sure required tooling and material is in stock and order as per procedure.
• Selects and grinds tools in accordance with hardness, machine ability and other properties of the parts to be machined.
• Procures and makes jigs, fixtures or machine attachments required for the job.
• Sets up and operates machine tools, adjust stops, feeds, and speeds for efficient machining.
• Machines parts to precision tolerances (.01mm or less) and specified finishes.
• Uses precision measuring instruments.
• Dismantles machinery and equipment, assembles fits, aligns, and readjusts machinery and equipment to very close tolerances.
• Works in shop floor as required.
• Works under the direction of the Machine Shop, Production Supervisors and Process Engineers.
• Practices effective safety procedures.
• Other related duties as assigned.

DEVELOPMENTAL SKILLS

To successfully perform this job, an individual must obtain certain skills, which will allow him/her to enhance the necessary work performance in relation to the essential duties and responsibilities.

It is essential that this individual possess the following skills. He/she must exercise excellent communication and interpersonal skills, utilize good judgement in making decisions and effectively delegate authority to others.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed representative of the knowledge, skill and/or ability required.

• Journeyman machinist or equivalent; demonstrable ability to operate all machine ship/tool and die equipment in an accomplished manner.
• Experience in operating CNC equipment.
• Able to program machines as per required.
• Ability to work without direct supervision.

EDUCATION and/or EXPERIENCE

High school Diploma or GED equivalence.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee required to stand, walk and use hands to finger, hands or feet. The employee is occasionally required to sit, reach with hands and arms, twist/turn, stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision and ability to adjust one's focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

While performing the duties of this job, the employee is occasionally exposed to wet humid or cold conditions, moving mechanical parts, chemicals, and extreme heat.

The noise level in the work environment is usually quiet to loud depending on work location

undefined

CCLprovides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment.All qualified applicants will receive consideration for employmentwithout regard to race, color, religion, age, sex, national origin, disability status, genetics,protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

CCL Industries web-site

Who is CCL?

CCL Label web-site

Employer Privacy Policy

EEO is the Law

ADP Privacy Statement Artificial Intelligence Google Privacy Policy Google Terms of Service