Tooling Engineer Energetics Manufacturing - level 2/3

Northrop Grumman Corp.; Elkton (KY); On-site; USD 88,000 - 163,000; Full time

Benefits offered by this job

Relocation assistance may be available

Job summary

Northrop Grumman Corp. in Elkton, MD is seeking a Tooling Engineer – Energetics Manufacturing (Level 2 or 3) to own the engineering and design of production tooling for energetic aerospace propulsion systems, including molds, lifting devices, handling fixtures, test fixtures, and other production tools used with energetic components and assemblies.

You will translate requirements into build-ready tooling using CAD and 3D modeling, then walking those designs into the shop to review

Qualifications

• Bachelor’s degree in a STEM discipline and at least 2 years of relevant experience (preferably design) OR a Master’s degree in a STEM discipline and 0 years of experience.
• U.S. Citizenship required with the ability to obtain a Secret clearance.
• Strong communication and problem-solving skills, with demonstrated success in a team environment.
• Familiarity with machine shop fabrication practices and material selection.
• Working knowledge of basic stress calculations for support structures.
• Proficiency with Excel, PowerPoint, Word, CAD, and 3D modeling tools.
• Composites and rubber molding experience is a plus.

Responsibilities

• Own the engineering and design of production tooling for energetic aerospace propulsion systems.
• Hands-on design, deployment, and support of molds, lifting devices, handling fixtures, test fixtures, and other production tools used with energetic components and assemblies.
• Translating requirements into build-ready tooling using CAD and 3D modeling, then walking those designs into the shop to review manufacturability, ergonomics, and safety with the operations team.
• Define tooling requirements and operating envelopes; ensure designs comply with HOPS and safety standards.
• Coordinate tooling fabrication with internal machine shops and external vendors; develop drawings/models and technical packages.
• Monitor build progress against plan and resolve technical or safety-related issues.
• Support tool introduction to production: tooling checkout and first-article use on the floor.
• Lead or support root-cause and corrective-action efforts when tooling or usage issues occur.
• Prepare tooling design and fabrication cost/schedule estimates; identify and implement improvements focusing on safety, ergonomics, throughput, maintenance, and reliability.

Skills

Strong communication

Problem solving

Education

Bachelor's degree in Mechanical Engineering or closely related discipline

Master's degree in a STEM discipline

Tools

CAD

3D modeling tools

Excel

PowerPoint

Word

Job description

RELOCATION ASSISTANCE: Relocation assistance may be availableCLEARANCE REQUIRED FOR START: NoCLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.We’re looking for a Tooling Engineer – Energetics Manufacturing (Level 2 or 3) to join our Operations Engineering team at our Propulsion Systems & Controls (PS&C) facility in Elkton, Maryland.Here you’ll:hands-on with the tooling and hardware that support our propulsion and ordnance systems—while applying strong technical rigor and formal safety standards every step of the way.Collaborate across engineering, manufacturing, test, and qualityBe part of a culture that values curiosity, diverse perspectives, and bringing your whole self to workOur Elkton PS&C facility designs, develops, and produces solid-propellant propulsion and ordnance systems for a wide range of Government and commercial customers. Elkton is also the engineering hub for our offsite facilities in Ronkonkoma, NY and Palm Beach Gardens, FL.Why Elkton?Elkton, Maryland sits on the Upper Chesapeake Bay, roughly midway between Philadelphia and Baltimore. It offers:Parks, trails, and water access for hiking, biking, camping, boating, and fishingIf you like the idea of leaving a high-impact engineering role and being on a trail or near the water in minutes, Elkton is a great fit.What You’ll DoYou’ll own the engineering and design of production tooling for energetic aerospace propulsion systems, including:Hands-on design, deployment, and support of molds, lifting devices, handling fixtures, test fixtures, and other production tools used with energetic components and assembliesTranslating requirements into build-ready tooling using CAD and 3D modeling, then walking those designs into the shop to review manufacturability, ergonomics, and safety with the operations teamWorking closely with project engineering, process engineering, manufacturing, quality, and safety to:Define tooling requirements and operating envelopesEnsure designs comply with Hazardous Operations Procedures (HOPS) and other safety standardsIncorporate hazard analyses, interlocks, guarding, and human-factors considerations into tooling concepts and final designsCoordinating tooling fabrication with internal machine shops and external vendors:Developing detailed drawings/models and technical packagesEstablishing fabrication scope and acceptance criteriaMonitoring build progress against plan and resolving technical or safety-related issuesSupporting tool introduction to production:Participating in tool checkout and first-article use on the floorVerifying that tool performance aligns with design intent, HOPS requirements, and safety / quality expectationsLeading or supporting root-cause and corrective-action efforts when tooling or usage issues occurPreparing tooling design and fabrication cost/schedule estimates for proposals, with clear technical and safety assumptionsIdentifying and implementing improvements to existing tooling designs focused on:Safety and compliance with HOPSHuman factors and ergonomicsThroughput, maintainability, and reliabilityLevel of hire (2 or 3) will depend on your skills, experience, education, and demonstrated competency.Basic Qualifications – Level 2Bachelor’s degree in a STEM discipline and at least 2 years of relevant experience (preferably design)OR a Master’s degree in a STEM discipline and 0 years of experienceU.S. Citizenship required with the ability to obtain a Secret clearanceBachelor’s degree in Mechanical Engineering or closely related disciplineStrong communication and problem-solving skills, with demonstrated success in a team environmentFamiliarity with machine shop fabrication practices and material selectionWorking knowledge of basic stress calculations for support structuresWorking knowledge of geometric dimensioning and tolerancing (ASME Y14.5M)Proficiency with Excel, PowerPoint, Word, CAD, and 3D modeling toolsComposites and rubber molding experience is a plusBasic Qualifications – Level 3Bachelor’s degree in a STEM discipline and at least 5 years of relevant experience (preferably design)OR a Master’s degree in a STEM discipline and at least 3 years of experienceU.S. Citizenship required with the ability to obtain a Secret clearanceBachelor’s degree in Mechanical Engineering or closely related disciplineStrong communication and problem-solving skills, with demonstrated success in a team environmentFamiliarity with machine shop fabrication practices and material selectionWorking knowledge of basic stress calculations for support structuresExperience working within a product or integrated project team, managing events and timelinesWorking knowledge of geometric dimensioning and tolerancing (ASME Y14.5M)Proficiency with Excel, PowerPoint, Word, CAD, and 3D modeling toolsComposites and rubber molding experience is a plusPreferred Qualifications (Both Levels)Experience with Siemens NX and Teamcenter (TcUA)Prior manufacturing or production floor experienceActive Secret clearanceThis position falls under a Federal Explosives License issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) for this location. Candidates hired into this role will be required to complete and submit an Employee Possessor Questionnaire to ATF for approval to be a possessor.Primary Level Salary Range: $87,600.00 - $131,400.00Secondary Level Salary Range: $108,800.00 - $163,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.