Tooling Engineer Energetics Manufacturing - level 2/3

Northrop Grumman; Elkton (MD); On-site; USD 88,000 - 163,000; Full time

Benefits offered by this job

Health insurance

Life and disability insurance

Savings plan

Company paid holidays

PTO

Job summary

Northrop Grumman in Elkton, MD is seeking a mechanically minded designer to support tooling for energetic components. You will design, deploy, and support molds, fixtures, and production tools using CAD and 3D modeling, collaborating with engineering, manufacturing, and safety teams to ensure manufacturability and safety.

Level 2 requires a STEM degree with 2+ years’ experience or a Master’s with 0 years; Level 3 requires 5+ years or a Master’s with 3 years. U.S.

Qualifications

• Bachelor’s degree in a STEM discipline and at least 2 years of relevant experience (Level 2)
• OR a Master’s degree in a STEM discipline and 0 years of experience
• U.S. Citizenship required with the ability to obtain a Secret clearance
• Bachelor’s degree in Mechanical Engineering or closely related discipline
• Strong communication and problem-solving skills, with demonstrated success in a team environment
• Familiarity with machine shop fabrication practices and material selection
• Working knowledge of basic stress calculations for support structures
• Working knowledge of geometric dimensioning and tolerancing (ASME Y14.5M)
• Proficiency with Excel, PowerPoint, Word, CAD, and 3D modeling tools
• Composites and rubber molding experience is a plus

Responsibilities

• Hands-on design, deployment, and support of molds, lifting devices, handling fixtures, test fixtures, and other production tools used with energetic components and assemblies
• Translating requirements into build-ready tooling using CAD and 3D modeling, then walking those designs into the shop to review manufacturability, ergonomics, and safety with the operations team
• Working closely with project engineering, process engineering, manufacturing, quality, and safety to:
• Define tooling requirements and operating envelopes
• Ensure designs comply with Hazardous Operations Procedures (HOPS) and other safety standards
• Incorporate hazard analyses, interlocks, guarding, and human-factors considerations into tooling concepts and final designs
• Coordinating tooling fabrication with internal machine shops and external vendors:
• Developing detailed drawings/models and technical packages
• Establishing fabrication scope and acceptance criteria
• Monitoring build progress against plan and resolving technical or safety-related issues
• Supporting tool introduction to production:
• Participating in tool checkout and first-article use on the floor
• Verifying that tool performance aligns with design intent, HOPS requirements, and safety / quality expectations
• Leading or supporting root-cause and corrective-action efforts when tooling or usage issues occur
• Preparing tooling design and fabrication cost/schedule estimates for proposals, with clear technical and safety assumptions
• Identifying and implementing improvements to existing tooling designs focused on:
• Safety and compliance with HOPS
• Human factors and ergonomics
• Throughput, maintainability, and reliability

Skills

CAD

Excel

PowerPoint

Word

3D modeling

ASME Y14.5M

Strong communication

Problem-solving

Education

Bachelor’s degree in Mechanical Engineering or closely related discipline

Master’s degree in STEM

Tools

Siemens NX

Teamcenter

CAD

3D modeling tools

Job description

RELOCATION ASSISTANCE: Relocation assistance may be available

CLEARANCE REQUIRED FOR START: No

CLEARANCE TYPE: Secret

TRAVEL: Yes, 10% of the Time

Description

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

Here You’ll

• hands-on with the tooling and hardware that support our propulsion and ordnance systems—while applying strong technical rigor and formal safety standards every step of the way.
• Collaborate across engineering, manufacturing, test, and quality
• Be part of a culture that values curiosity, diverse perspectives, and bringing your whole self to work

Our Elkton PS&C facility designs, develops, and produces solid-propellant propulsion and ordnance systems for a wide range of Government and commercial customers. Elkton is also the engineering hub for our offsite facilities in Ronkonkoma, NY and Palm Beach Gardens, FL.

Why Elkton?

• Parks, trails, and water access for hiking, biking, camping, boating, and fishing

If you like the idea of leaving a high-impact engineering role and being on a trail or near the water in minutes, Elkton is a great fit.

What You’ll Do

• Hands-on design, deployment, and support of molds, lifting devices, handling fixtures, test fixtures, and other production tools used with energetic components and assemblies
• Translating requirements into build-ready tooling using CAD and 3D modeling, then walking those designs into the shop to review manufacturability, ergonomics, and safety with the operations team
• Working closely with project engineering, process engineering, manufacturing, quality, and safety to:
• Define tooling requirements and operating envelopes
• Ensure designs comply with Hazardous Operations Procedures (HOPS) and other safety standards
• Incorporate hazard analyses, interlocks, guarding, and human-factors considerations into tooling concepts and final designs
• Coordinating tooling fabrication with internal machine shops and external vendors:
• Developing detailed drawings/models and technical packages
• Establishing fabrication scope and acceptance criteria
• Monitoring build progress against plan and resolving technical or safety-related issues
• Supporting tool introduction to production:
• Participating in tool checkout and first-article use on the floor
• Verifying that tool performance aligns with design intent, HOPS requirements, and safety / quality expectations
• Leading or supporting root-cause and corrective-action efforts when tooling or usage issues occur
• Preparing tooling design and fabrication cost/schedule estimates for proposals, with clear technical and safety assumptions
• Identifying and implementing improvements to existing tooling designs focused on:
• Safety and compliance with HOPS
• Human factors and ergonomics
• Throughput, maintainability, and reliability

Level of hire (2 or 3) will depend on your skills, experience, education, and demonstrated competency.

Basic Qualifications – Level 2

• Bachelor’s degree in a STEM discipline and at least 2 years of relevant experience (preferably design)
• OR a Master’s degree in a STEM discipline and 0 years of experience
• U.S. Citizenship required with the ability to obtain a Secret clearance
• Bachelor’s degree in Mechanical Engineering or closely related discipline
• Strong communication and problem-solving skills, with demonstrated success in a team environment
• Familiarity with machine shop fabrication practices and material selection
• Working knowledge of basic stress calculations for support structures
• Working knowledge of geometric dimensioning and tolerancing (ASME Y14.5M)
• Proficiency with Excel, PowerPoint, Word, CAD, and 3D modeling tools
• Composites and rubber molding experience is a plus

Basic Qualifications – Level 3

• Bachelor’s degree in a STEM discipline and at least 5 years of relevant experience (preferably design)
• OR a Master’s degree in a STEM discipline and at least 3 years of experience
• U.S. Citizenship required with the ability to obtain a Secret clearance
• Bachelor’s degree in Mechanical Engineering or closely related discipline
• Strong communication and problem-solving skills, with demonstrated success in a team environment
• Familiarity with machine shop fabrication practices and material selection
• Working knowledge of basic stress calculations for support structures
• Experience working within a product or integrated project team, managing events and timelines
• Working knowledge of geometric dimensioning and tolerancing (ASME Y14.5M)
• Proficiency with Excel, PowerPoint, Word, CAD, and 3D modeling tools
• Composites and rubber molding experience is a plus

Preferred Qualifications (Both Levels)

• Experience with Siemens NX and Teamcenter (TcUA)
• Prior manufacturing or production floor experience
• Active Secret clearance

This position falls under a Federal Explosives License issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) for this location. Candidates hired into this role will be required to complete and submit an Employee Possessor Questionnaire to ATF for approval to be a possessor.

Primary Level Salary Range: $87,600.00 - $131,400.00

Secondary Level Salary Range: $108,800.00 - $163,200.00

The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.

Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.

The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.

Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.