TIG Welder (3rd Shift, Mon-Fri)

componentrepairtechnologies

Mentor (OH)

On-site

USD 42,000 - 64,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Component Repair Technologies, Inc. (CRT) seeks a qualified Welder to support repair and modification of turbine engine components using TIG welding.

You will handle stainless steels, titanium, aluminum and nickel alloys, with emphasis on aerospace-grade quality and safety standards. The role involves training under AWS D17.1 aerospace endorsement and OJT; you will work with experienced welders to improve techniques, read prints, and perform various welding and brazing tasks in a

Qualifications

  • High school technical or trade school completion in welding.
  • Minimum of two years TIG welding experience.
  • AWS D17.1 aerospace endorsement certification preferred.

Responsibilities

  • Follow established safety protocols and company policies.
  • Read and interpret technical drawings and work instructions.
  • Complete AWS D17.1 aerospace endorsement certification and OJT requirements.
  • Perform TIG welding, welding prep, and finishing; lower supervision to independent when proficient.
  • Inspect welds for quality and conformance to specifications.
  • Work with welding equipment, fixtures, and pre-heat methods as required.
  • Assist with brazing and other related welding tasks as needed.

Skills

TIG welding
Read drawings
AWS certification

Education

High school technical welding

Job description

JOB SUMMARY

The position of Welder will apply their knowledge and skills in Gas Tungsten Arc Welding (TIG) including fitting, welding, and brazing for the repair and modification of turbine engine components, primarily used in the aerospace industry. Materials include, but are not limited to, stainless steels, titanium, aluminum and nickel alloys such as hastaloy and inconel.

Participation in a continuous and proven on-the-job training program (OJT) and adherence to the American Welding Society (AWS D17.1 -aerospace endorsement) structured certification program is expected.

This position will work alongside experienced welders that allows continuous interaction of techniques, skill knowledge, and print reading and interpretation. You will become familiar with various types of welding, equipment, learn about safety and quality standards, and develop your welding technique all under the supervision of a professional team of welders. As your skills increase, so will your responsibilities, giving you hands‑on experience, growth, and additional responsibilities.

This position operates from a climate controlled and modern welding department area.

COMPANY OVERVIEW

Component Repair Technologies, Inc. (CRT) began as a locally family-owned business, with operations in Mentor, OH since 1985, and grew into a global leader (500+ employees) in the aerospace MRO sector. Specializing in the repair and overhaul of turbine engine components, CRT proudly serves the world's largest airlines and jet engine manufactures. Component Repair Technologies is focused on our valued employees, customers, and community.

In 2025, CRT became a Safran Aircraft Engines company as a Center of Excellence for the repair of large jet engine parts in the Americas.

For over 120 years, Safran, through its Aircraft Engines subsidiary, designs, produces, markets and supports, alone or in partnership, aircraft engines offering world‑class performance and reliability. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible.

Operating through CFM International, its 50/50 joint venture with GE Aerospace, Safran Aircraft Engines is the world's leading supplier of single‑aisle commercial jet engines, the CFM56 and LEAP. Safran Aircraft Engines is fully committed to sustainable aviation through the RISE (Revolutionary Innovation for Sustainable Engines) technology development program. Safran Aircraft Engines also deploys a global network providing a full range of support, maintenance & repair services.

Visit www.componentrepair.comand www.safran-group.comfor more information. Take-off in your career, learn new skills and become part of a world‑class workforce.

DUTIES AND RESPONSIBILITIES
  • Follow established safety protocols and guidelines to ensure full compliance with company safety policies and procedures.
  • Follow written and verbal instructions accurately. Clearly understand all instructions prior to proceeding with work. Be able to read and interpret various documents, work instructions and drawings.
  • Successfully complete all requirements of AWS D17.1 -aerospace endorsement certification and the OJT requirements of the company and the weld department.
  • Perform welding, weld prep and weld finishing operations (primary TIG application) under the direction and observation of a skilled welder or trainer initially. When proficiency is demonstrated (via various testing methods) perform the aforementioned tasks independently.
  • Inspect work for completion and quality. Understand and achieve weld quality requirements.
  • The welder may perform in the following disciplines:
  • Perform Gas Tungsten Arc Welding (TIG welding) or parts.
  • Perform Torch Brazing of tubes and connectors.
  • Perform Automated TIG Welding.
  • Use pneumatic hand grinders, and other powered bench tools to grind metal to prepare parts for welding or to finish after welding.
  • Use weld fixtures, chill blocks, gas back‑ups, pre‑heat methods, and other methods and equipment.
  • Perform local heat treat and local stress relief of weld repair areas.
  • Assemble and fit parts such as flanges to cases, cut and fit patches, or assemble tubes and fittings.
  • Perform non-certified welding for shop maintenance, building installation, or for tooling and fixturing.
REQUIRED QUALIFICATIONS
  • Technical high school, or equivalent trade school completion in a weld curriculum.
  • Successful completion of skill specific TIG welding courses from an approved technical or welding school and/or a minimum of two years' TIG specific welding experience.
  • Previous certification credentials in an AWS welding classification, with AWS D17.1 preference.
  • The ability to interpret and follow written and verbal instructions accurately, including reading and interpretation of technical drawings.
OTHER QUALIFICATIONS
  • Read, write, speak, and understand the English language.
  • Basic knowledge of computers and standard software programs.
  • Demonstrated ability to perform
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

TIG Welder (3rd Shift, Mon-Fri)
TIG Welder (3rd Shift, Mon-Fri)

Component Repair Technologies, Inc. • Mentor (OH)

On-site
USD 30,000 - 47,000
Health care options
401k with company match
Tuition reimbursement
+2
TIG Welder (3rd Shift, Mon-Fri)
TIG Welder (3rd Shift, Mon-Fri)

Component Repair Technologies • Mentor (OH)

On-site
USD 55,000 - 75,000
Health insurance
401k with company match
Tuition reimbursement
+2
TIG Welder (2nd Shift Weekend, Fri-Mon)
TIG Welder (2nd Shift Weekend, Fri-Mon)

Component Repair Technologies • Mentor (OH)

On-site
USD 65,000 - 80,000
Health care options
401k with company match
Tuition reimbursement
+2
TIG Welder (1st Shift Weekend, Fri-Mon)
TIG Welder (1st Shift Weekend, Fri-Mon)

Component Repair Technologies • Mentor (OH)

On-site
USD 30,000 - 47,000
Health insurance
401k with company match
Tuition reimbursement
+2
TIG Welder (2nd shift, Mon-Fri)
TIG Welder (2nd shift, Mon-Fri)

Component Repair Technologies • Mentor (OH)

On-site
USD 50,000 - 70,000
Health and dental insurance
401k with company match
Tuition reimbursement
+1
Production Supervisor- Weld (1st Shift, Mon-Fri)
Production Supervisor- Weld (1st Shift, Mon-Fri)

Component Repair Technologies • Mentor (OH)

On-site
USD 70,000 - 90,000
Health care options
401k matching
Tuition reimbursement
+1
Aerospace TIG Welder — On-the-Job Training & Growth
Aerospace TIG Welder — On-the-Job Training & Growth

Component Repair Technologies • Mentor (OH)

On-site
USD 65,000 - 80,000
Health care options
401k with company match
Tuition reimbursement
+2
Repair & Assembly Technician (1st Shift Weekend, Fri-Mon)
Repair & Assembly Technician (1st Shift Weekend, Fri-Mon)

componentrepairtechnologies • Mentor (OH)

On-site
USD 42,000 - 64,000
TIG Welder - Aerospace Components (OJT)
TIG Welder - Aerospace Components (OJT)

componentrepairtechnologies • Mentor (OH)

On-site
USD 42,000 - 64,000
Aerospace TIG Welder: Train, Certify & Advance
Aerospace TIG Welder: Train, Certify & Advance

Component Repair Technologies • Mentor (OH)

On-site
USD 30,000 - 47,000
Health insurance
401k with company match
Tuition reimbursement
+2