Thermal/ Mechanical Engineer

QuantumScape Battery, Inc.; San Jose (CA); Hybrid; USD 137,000 - 209,000; Full time

Job summary

QuantumScape Battery, Inc. is seeking a Thermal/Mechanical Engineer to own the physical design of rack-mount battery system enclosures.

You’ll translate the needs of solid-state cells and power electronics into manufacturable shelf concepts, ensuring safe operation and serviceability in a data-center-like environment. You will collaborate with battery systems engineers, run CFD analyses, and lead DFM engagement with contract manufacturers, while ensuring compliance with thermal and mechanical

Qualifications

• 8+ years designing thermal-mechanical enclosures for rack-mount power, compute, or telecom equipment.
• Bachelor’s degree in engineering or higher; 9+ years experience or higher degrees with reduced experience.
• CFD thermal simulation experience with Ansys Icepak, FloTHERM, or 6SigmaET is required.
• Proficiency in SolidWorks or Creo for detailed mechanical design.
• Sheet metal design for volume manufacturing (bend radii, punching, spotting).
• Track record of designs through contract manufacturing and thermal validation.

Responsibilities

• Design the complete mechanical enclosure (1OU or 2OU shelf) in SolidWorks or Creo.
• Solve core thermal challenges with airflow paths, isolation zones, and heat spreaders.
• Run CFD simulations to optimize airflow under worst-case conditions.
• Collaborate on cell pack mounting and mechanical isolation inside the enclosure.
• Perform vibration and shock analysis for shipping per ISTA 3-series or GR-63-CORE.

Skills

Thermal-mechanical enclosure design

CFD thermal simulations

SolidWorks or Creo

Sheet metal design

Contract manufacturing experience

Airflow management

Education

Bachelor’s degree in engineering

Tools

Ansys Icepak

FloTHERM

6SigmaET

Job description

Title: Thermal/ Mechanical Engineer, Battery System

Date: Sep 14, 2026

Location: CA, US, 95131

Work Location Type: On-site

Description

QuantumScape is on a mission to transform energy storage with solid-state lithium-metal battery technology. The company’s next-generation batteries are designed to enable greater energy density, faster charging and enhanced safety to support the transition away from legacy energy sources toward a lower carbon future.

About the role

As Thermal/ Mechanical Engineer, you own the physical design of the product. You translate circuit boards and battery packs into a manufacturable shelf that fits the rack, survives the data center environment, and can be serviced by a technician in seconds.

Why this role matters

Hyperscalers don't negotiate on rack geometry. If the shelf doesn't fit, doesn't cool, or can't be serviced in seconds, it doesn't get evaluated- regardless of how good the electrical design is. You are also the company's primary interface to the hyperscaler's mechanical integration team during qualification. Your design fluency with their unwritten preferences (not just the published specs) can compress the qualification timeline by months. In a product where power electronics and battery cells share a tight enclosure, you are the person who makes coexistence physically possible.

What you'll do

• Design the complete mechanical enclosure (1OU or 2OU shelf) in SolidWorks or Creo: sheet metal chassis, busbar routing, internal structural supports, and external connector interfaces
• Solve the core thermal challenge: power semiconductors and magnetics (tolerant to 100-125°C junction) sharing an enclosure with solid-state battery cells (requiring sub-45-60°C operation) - via directed airflow paths, thermal isolation zones, heat spreaders, and fan selection
• Run CFD simulations (Ansys Icepak, FloTHERM, or 6SigmaET) to optimize airflow distribution under worst-case conditions: full electrical load, 35-40°C inlet air (ASHRAE A1/A2), fan degradation scenarios
• Design to OCP ORv3 mechanical specifications:shelf width, depth, connector position, airflow direction (front-to-back), ejector handle placement, guide rail interface, and weight-per-OU limits
• Develop the hot-swap sled mechanism with proper insertion/extraction force curves, blind-mate power connector alignment, and guide rail compliance for tool-less serviceability
• Collaborate with the battery systems engineer on cell pack mounting, compression, thermal interface materials, and mechanical isolation within the enclosure
• Perform vibration and shock analysis for shipping (ISTA 3-series) and seismic requirements (GR-63-CORE or Bellcore Zone 4)
• Lead DFM engagement with contract manufacturers: tolerances, tooling, bend radii, spot welding, PEM fastener insertion, and assembly sequence optimization
• Support UL 62368-1 mechanical and flammability requirements (material selection for 94 V-0, spacing, enclosure integrity)
• Interface directly with hyperscaler mechanical integration teams during qualification reviews

What you bring

• 8+ years designing thermal-mechanical enclosures for rack-mount power, compute, or telecom equipment
• Relevant Bachelor’s degree and 9+ years’ experience or a relevant Master’s degree and 8+ years’ experience or relevant Ph.D. and 5+ years’ experience

• Demonstrated experience with CFD thermal simulation tools (Ansys Icepak, FloTHERM, or 6SigmaET) - not optional
• Proficiency in SolidWorks or Creo for detailed mechanical design
• Sheet metal design for volume manufacturing (bend radii, punching/stamping, spot welding, tolerance stackup analysis)
• Track record of designs that went through contract manufacturing and passed thermal validation in a production or data center environment
• Understanding of airflow management in forced-convection rack environments

Nice to have

• Direct experience with OCP Open Rack/ ORv3 mechanical specifications
• Prior work on battery pack thermal management (EV, stationary storage, or telecom backup)
• Exposure to liquid cooling or cold plate design (emerging trend for rack power shelves)
• Experience with blind-mate connector integration (Amphenol, TE Connectivity, or Molex high-power connectors)
• Familiarity with UL 62368-1 mechanical/flammability requirements and UL 1973 battery enclosure requirements
• Knowledge of IP67/NEMA ratings for potential edge or outdoor deployment variants
• Experience with vibration/shock testing per ISTA 3-series or GR-63-CORE

ONSITE

This position is required to work onsite 5 days per week to meet the minimum essential duties and requirements of this position. As an on-site R&D and manufacturing operations organization, in-person face to face interaction is essential to building authentic relationships, trust, teamwork, and collaboration.

Compensation & Benefits

Expected salary range for this role is from $136,700 to $208,500, and a final salary will be determined by the candidate's experience, educational background and internal equity. QuantumScape also offers an annual bonus and a generous RSU/Equity package as part of its compensation plan. In addition, we do offer a tremendous benefits plan including employee paid health care, Employee Stock Purchase Plan (ESPP), and other benefits.

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request an accommodation.