TFS P&C Field Technologist Assoc- Michiana

AEP Service Corporation

United States

On-site

USD 65,000 - 90,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

AEP Service Corporation is seeking a P&C Field Technologist Associate to perform programming, operation, testing and maintenance of protection and control devices across the power grid. You will work with digital relays, SDR/DFR, RTUs, SCADA systems, PLCs and related communications, including field troubleshooting and on-site installations.

The role involves calibration, data recording, and occasional emergency callouts to restore service. Outdoor work in varied weather is expected.

Qualifications

  • Bachelor's degree in engineering technology with ABET accreditation.
  • Ability to perform technical functions with guidance in assigned area.
  • Familiarity with standards, codes and regulations related to P&C.

Responsibilities

  • Test protection and control devices periodically and as required.
  • Calibrate devices on a pre-established schedule and as required.
  • Assist with switching at all voltage levels under Dispatching Authority guidance.
  • Maintain test equipment in good working order.
  • Record test readings and ensure installations meet specifications before service.
  • Assist in installation, maintenance, and operation of relays and SCADA equipment.
  • Troubleshoot electromechanical relays and microprocessor-based relays.
  • Assist in diagnosing equipment failures and take corrective action.
  • Read schematics and verify electrical installations match designs.
  • Work outdoors in summer and winter conditions as needed.

Skills

Technical aptitude
Problem solving
Team collaboration

Education

Bachelor's Degree in ABET-accredited engineering technology

Job description

Job Summary

A P&C Field Technologist Associate is responsible for performing work associated with the programming, operation, testing and maintenance of fundamental protection and control devices and related equipment. P&C's primary focus is understanding control circuitry and utilizing computer-based testing and analysis of devices and equipment that includes, but is not limited to, digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), Digital Fault Recorders (DFR), system event recorders, Remote Terminal Units (RTU's) and station SCADA systems (dispatcher remote control systems), statistical load metering, telemetering and potential/current transducers. Additionally, will maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications over the power grid network. Within the discipline of P&C, will occasionally respond to emergency callouts at electrical substations and coordinate prompt restoration of service to customers as required.

Job Description
What you'll do:
ESSENTIAL JOB FUNCTIONS:
  • Test fundamental protection & control devices and equipment periodically and as required.
  • Calibrate fundamental protection & control devices and equipment on a pre-established schedule and as required.
  • Assist with switching at all voltage levels under the direction of the proper Dispatching Authority.
  • Maintain test equipment in good working order.
  • Maintain accurate records, reports and drawings as required.
  • Operate a computer device to test, calibrate, and retrieve data from protection & control devices.
  • Assist in the installation, maintenance, and operation of all relays, power line carrier sets, station SCADA, and associated communications equipment or cables as assigned.
  • Troubleshoot and repair fundamental electromechanical relays.
  • Troubleshoot and repair microprocessor-based relays at the card level, such as replacing power supplies, communications cards, I/O cards, etc.
  • Assist with the diagnosis of equipment failures, protection mis-operations, and assist with corrective action to perform repairs and prevent recurrence.
  • Ensure the circuitry, installation and operation of equipment is correct prior to placing equipment in service. Read electrical schematics and determine that the physical installation at the site is electrically equivalent to the schematic. Record test readings and results and determine they are within acceptable specifications and thus the physical installation will perform as per the design.
  • Basic fault analysis: obtain oscillography data to determine if the protective devices operated as per their issued relay settings.
  • Assisting a team in the installation, testing, and commissioning of new P&C systems for capital construction projects. Assist the on-site technical lead with directing the activities of contract wireman and the activities of other P&C field personnel assigned to their project.
  • While most work is performed within climate-controlled facilities, P&C has occasional activities requiring work to be performed outdoors in both summer and winter conditions.
What we’re looking for:
COMPETENCIES/TECHNICAL PROFICIENCY:
  • Possesses technical to entry level knowledge acquired from a Bachelor's Degree in an ABET accredited engineering technology program;
  • Demonstrates the ability to perform with proper guidance special technical functions required in the relevant area of assignment;
  • Gains familiarity with standards, codes, and regulations relevant to the area of assignment;
  • Gains familiarity with pertinent equipment, materials, systems, and business processes;
  • Assists higher level employees in handling well defined portions of routine problems;
PLANNING AND ORGANIZATION ABILITY:
  • Maintains required records to support assignments and prepares special reports for tests, equipment performance, projects and other reports as assigned;
  • Plans work in accordance with AEP standard planning practices;
  • Prioritizes routine work to meet the demands of the company;
  • Assists with providing input to annual budget, capital forecasts, five-year plan, and improvement requisitions;
  • Participates in planning meetings covering scheduling, operations, and maintenance of equipment;
  • Assists in the preparation of basic cost estimates using established guidelines;
PROBLEM-SOLVING AND INITIATIVE:
  • Seeks opportunity to work beyond routine assignments by solving problems of light complexity;
  • Actively seeks out information to increase technical knowledge in area of responsibility;
  • Applies technical knowledge in resolving basic problems encountered in assigned work;
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

P&C Technician
P&C Technician

AEP Service Corporation • Laredo (TX)

On-site
USD 70,000 - 90,000
TFS P&C Field Technologist Assoc- Michiana
TFS P&C Field Technologist Assoc- Michiana

AEP • Niles (MI)

On-site
USD 41,000 - 73,000
P&C Field Technologist Associate - West Ohio
P&C Field Technologist Associate - West Ohio

AEP • Ohio

On-site
USD 42,000 - 62,000
TFS P&C Field Technologist Assoc- Michiana
TFS P&C Field Technologist Assoc- Michiana

Indiana Michigan Power Company • Michiana (MI)

On-site
USD 43,000 - 73,000
Protection and Control Relay Technician P&C
Protection and Control Relay Technician P&C

Powerserve Technologies, Inc • Florida

On-site
USD 50,000 - 70,000
Customer Design Technician Associate - Technician
Customer Design Technician Associate - Technician

AEP • Elkhart (IN)

On-site
USD 36,000 - 53,000
P&C Tech 4P/235
P&C Tech 4P/235

4P Consulting Inc. • Atlanta (GA)

On-site
USD 60,000 - 80,000
Project Manager - Central Engineering, Protective Relay Strategy Implementation
Project Manager - Central Engineering, Protective Relay Strategy Implementation

Con Edison • New York (NY)

On-site
USD 120,000 - 180,000
P&C Senior Test Engineer
P&C Senior Test Engineer

POWERX • Fort Wayne (IN)

On-site
USD 90,000 - 135,000
Competitive Pay
Incentives for Certifications
Referral Bonus Program
+4
P&C Electrician C-A
P&C Electrician C-A

AEP Service Corporation • Shreveport (LA)

On-site
USD 60,000 - 90,000