Test and Activation Specialist I

Austal Usa, LLC; Mobile (AL); On-site; USD 52,000 - 64,000; Full time

Job summary

Austal USA, LLC in Mobile, AL is seeking technicians to perform routine testing, checkout, and troubleshooting on marine vessel systems. You will work from schematics, diagrams, and defined plans to ensure conformance with final product specifications.

Responsibilities include fault isolation, diagnostic testing with specialized equipment, and some basic design input to test procedures. Prior naval/maritime experience is preferred and a DoD clearance may be required in scope of duties.

Qualifications

• Two years of technical trade or military technical training.
• Prior Navy, Coast Guard, or Merchant Mariner experience with marine systems.
• Basic understanding of ship construction drawings and testing procedures.
• Fundamental knowledge of how marine equipment should operate.
• Able to read and interpret electrical and piping diagrams, schematics and drawings.

Responsibilities

• Perform routine testing, checkout, and trouble-shooting per schematics and plans.
• Conduct routine operational tests and fault isolation to meet final product specs.
• Use diagnostic equipment specific to the product to verify performance.
• Assist in test equipment/procedures development as needed.
• Support production, test, system checkouts, and quality control activities.

Skills

Mechanical aptitude

Electrical aptitude

Troubleshooting

Reading schematics

Reading drawings

Education

Technical trade school

Maritime/Mariner experience

Tools

Multimeter

Hand tools

Wrenches

Socket sets

Job description

DUTIES / RESPONSIBILITIES

• Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform routine testing, checkout, and trouble-shooting functions of a simple nature.


• Performs routine operational test and fault isolation on systems and equipment to ensure conformance with final product specifications.


• Utilizes routine manufacturing test or diagnostic equipment specific to the product.


• May perform limited design activities in support of test equipment/procedures development.


• Assigned to activities such as production, test, system checkouts, quality control.


• Conduces defined tests and collects data as assigned.


• Diagnoses and isolates malfunctions down to the component level.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE

• Preferred experience and/or training:Testing experience in a shipyard, marine, aerospace, industrial/commercial, or offshore oil and gas environment.


• Two (2) years technical trade or military technical school.


• Prior Navy, Coast Guard, or Merchant Mariner experience.


• Basic understanding of ship construction drawings and testing procedures.


• Basic knowledge of how marine equipment should operate.


• Basic Mechanical and/or Electrical aptitude is essential.


• Basic understanding of mechanical and electrical propulsion and electrical power generating equipment.


• Demonstrated ability to read and interpret electrical and piping system diagrams, schematics and drawings.


• Knowledge of diesel engines and gas turbines


• Knowledge of shipboard damage control systems


• Knowledge of hydraulic systems and shipboard deck equipment


• Knowledge of Auxiliary and/or HVAC systems.

ADDITIONAL GUIDELINES

• 18 years of age or older at time of application


• Able to provide proof of US Person Status


• No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date


• No felony convictions of Drug crimes within three years from disposition date


• Willing to submit to a drug screen


• Willing to submit to a background check


• The ability to obtain and maintain a DoD clearance may be required if deemed necessary in the scope of your position responsibilities.

TRAVEL

This position will require repair efforts in various offsite locations and will be required to travel to customer sites to support work on vessels if deemed necessary in the scope of your position responsibilities. The potential for offsite travel can potentially be in excess of 15-25%. Some overseas travel is possible although NO TRAVEL to declared warzones is anticipated.

TOOLS

Multi-meterBasic hand toolsWrenchesSocket setsEtc to accomplish assigned tasks

PHYSICAL DEMANDS

1. Must have the ability to bend, squat, stoop, crawl, and kneel.


2. Perform prolonged standing.


3. Ability to turn head from side to side and about the vertical axis.


4. Ability to turn body at the waist from side to side and about the vertical axis.


5. Lift/push/pull 50lbs to 75lbs on an occasional basis.


6. Lift/push/pull up to 20lbs on a frequent basis.


7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).


8. Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.


9. Able to work at a variety of levels (ex. waist, eye, overhead).


10. Demonstrate the ability to safely and appropriately use required tools and equipment.


11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.


12. Possess sufficient handgrip and coordination to carry and operate tools and equipment.


13. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.


14. Ability to withstand cold and hot temperatures.


15. Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time.


16. Able to respond to verbal and audible sounds/commands.


17. Able to utilize adequate visual skills.


18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.


19. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.

SAFETY

Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

Equal Employment Commitment

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932. Austal shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.