Technician - Test & Launch Ops Sr.

Blue Origin LLC; United States; On-site; USD 71,008,000 - 99,463,000; Full time

Benefits offered by this job

Medical, dental, vision insurance

Stock options

Paid time off

Education Support Program

Job summary

Blue Origin in the United States is seeking a skilled test technician to execute development, qualification, and production tests on flight and non-flight hardware. You will set up configurations, operate environmental test equipment, and document results in real time, ensuring adherence to procedures and safety controls.

Responsibilities include troubleshooting with test engineering, updating procedures, calibrating instruments, and mentoring junior technicians.

Qualifications

• 5+ years hands-on experience as a test, integration, electronics, or electromechanical technician.
• Ability to execute written procedures and work orders exactly, and to document results completely and legibly.
• Experience with electrical test equipment including DMMs, oscilloscopes, power supplies, and harness testers.
• Experience handling ESD-sensitive assemblies and following ESD controls.
• Ability to read and interpret engineering drawings, schematics, wiring diagrams, and from-to lists.
• Willingness to work off-shift, extended hours, overtime, and weekends if necessary.
• Must be a U.S. citizen or eligible to work in the U.S.

Responsibilities

• Execute development, qualification, and production test procedures on flight and non-flight hardware.
• Set up and break down test configurations, including harness installation and chamber loading.
• Operate environmental test equipment such as thermal and vacuum chambers.
• Perform electrical test and checkout, including continuity and dielectric tests.
• Handle flight hardware under ESD and contamination control.
• Record data and complete work orders in real time.
• Identify anomalies, stop work when needed, and assist troubleshooting with test engineering.
• Redline procedures during execution and drive updates with test engineering.
• Propose improvements to test setup and tooling to reduce cycle times and errors.
• Verify calibration of tools and record identifiers and due dates in work orders.
• Maintain test stations and equipment, including routine checks and consumables.
• Support test station bring-up, checkout, and first-article test runs with engineering.
• Run and help develop automated test sequences and report automation failures.
• Train and mentor other technicians and assist in creating training materials.
• Maintain a safe, organized, and FOD-free work area and follow safety controls.

Skills

Electronics troubleshooting

Reading engineering drawings

Documentation & procedures

Instrument calibration

ESD controls

Education

High school diploma or GED

Associate degree or technical certificate in electronics/mechatronics

Tools

Digital multimeters

Oscilloscopes

Power supplies

Continuity/harness testers

Jules

Windchill

SAP

Job description

Responsibilities

• Execute development, qualification, and production test procedures on flight and non-flight hardware, following the written procedure exactly and documenting what actually happened.
• Set up and break down test configurations, including harness installation, instrumentation, fixturing, and chamber loading and unloading.
• Operate environmental test equipment under procedure, including thermal chambers, vibration tables, and vacuum chambers.
• Perform electrical test and checkout, including continuity, isolation, dielectric withstand, and powered functional tests.
• Handle flight hardware under ESD and contamination control, including clean room protocol where required.
• Record test data and complete work order buyoffs accurately and as the work happens, not afterward.
• Identify and report anomalies immediately, stop work when required, and support troubleshooting alongside test engineering.
• Redline procedures during execution and drive the resulting updates with test engineering so the next person does not hit the same problem.
• Propose and implement improvements to test setup, tooling, sequence, and layout to reduce cycle time, rework, and setup error.
• Verify tool and instrument calibration before use, and record calibration identifiers and due dates in the work order.
• Maintain test stations and equipment, including routine checks, consumables, spares, and housekeeping.
• Support test station bring-up, checkout, and first-article test runs alongside engineering.
• Run, monitor, and eventually help develop automated test sequences, including triaging and reporting automation failures.
• Train and mentor other technicians as the team grows, including off-shift crews, and help build the training material they learn from.
• Maintain a safe, organized, and FOD-free work area, and follow all established safety controls.
• Other duties as assigned or otherwise beneficial to fulfilling the mission and vision.

Minimum Qualifications

• High school diploma or GED.
• 5+ years of hands‑on experience as a test, integration, electronics, or electromechanical technician.
• Demonstrated ability to execute written procedures and work orders exactly, and to document results completely and legibly.
• Experience with electrical test equipment, including digital multimeters, oscilloscopes, power supplies, and continuity or harness testers.
• Experience handling ESD‑sensitive electronic assemblies and following ESD controls.
• Ability to read and interpret engineering drawings, schematics, wiring diagrams, and from‑to lists.
• Experience with hand tools and calibrated torque tools, and an understanding of why calibration status matters.
• Willingness to speak up when a procedure is wrong, unclear, or unsafe, and to propose a better way.
• Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion.
• Ability to work off‑shift, extended hours, overtime, and weekends if and when necessary.
• Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Preferred Qualifications

• IPC J‑STD‑001 certification, including the GS Space Addendum.
• IPC‑A‑610 and IPC/WHMA‑A‑620 certification.
• NASA‑STD‑8739.4 crimping, cable, and harness certification.
• Environmental test experience, including thermal cycling, vibration, shock, thermal vacuum, EMI/EMC, or burn‑in.
• Experience on satellite, spacecraft, launch vehicle, aircraft, or defense electronics hardware.
• Clean room experience, including gowning protocol and contamination control.
• High voltage test experience and the safety practices that go with it.
• Military electronics, avionics, submarine, or nuclear technician background.
• Experience running automated test stations, including recipe or sequence editing and basic scripting.
• Experience with work order and manufacturing execution systems, such as Jules, Windchill, or SAP.
• Experience writing or redlining procedures that other technicians then worked from.
• Experience training or leading other technicians.
• Experience in a production environment that increased rate, and a view on what made test faster or slower.
• Lean, 5S, or continuous improvement participation.
• Associate degree or technical certificate in electronics, mechatronics, or a related field.

Physical Requirements

This role is performed in a laboratory and production environment. Stand and walk for extended periods on a laboratory or production floor. Lift and carry up to 35 pounds unassisted, and more with assistance or lifting equipment. Bend, kneel, crouch, reach overhead, and work in confined or restricted-access spaces. Work on ladders and elevated work platforms. Distinguish colors for wire, connector, and component identification. Perform detailed work requiring fine motor control and close visual focus. Wear personal protective equipment, including safety glasses, hearing protection, ESD garments, and clean room garments. Work in proximity to high voltage, pressurized systems, chambers, and operating machinery under established safety controls.

Base Pay Range for: WA applicants is $24.74 - $34.63 Other site ranges may differ

Why Blue Origin

At Blue Origin, we are building a road to space for the benefit of Earth. Test is the last place a problem can be caught before hardware ships, which makes the technician running that test one of the most consequential people in the building. In this role your work affects every unit that leaves the floor, and the procedures you help write will outlast the first article by years. Base Pay Range for: WA applicants is $24.74 - $34.63 Other site ranges may differ.

Culture Statement

Don’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.

Export Control Regulations

Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Background Check Required

Blue’s Standard Background Check Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical.

Benefits

• Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.
• Stock Options for all regular employees (working at least 20 hours/week)
• Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.
• Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details.

Equal Employment Opportunity

Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see here.

Affirmative Action and Disability Accommodation

Applicants wishing to receive information on Blue Origin’s affirmative action plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at [e-mail]. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. We’re committed to building the road to space so our children can build the future. We are a mission-driven company focused on ideas and innovation, and encourage fresh perspectives from bold voices. At Blue, our team is building the future as their unique selves.

Thank you for your interest in working at Blue Origin

Thank you for your interest in working at Blue Origin! Blue Origin was founded with a vision to enable a future where millions of people are living and working in space to benefit Earth. In order to preserve Earth, Blue Origin believes in the need to enable humanity to expand, explore, find new energy and material resources, and move industries that stress Earth into space. Blue Origin believes it has an important role in building a road to space and lowering the cost of getting there. At Blue Origin, we’re working on this today by developing fully reusable launch vehicles and systems that are safe, reliable and affordable. Every launch vehicle is designed for human spaceflight from the beginning and able to ferry payloads to space.