Technician I

NES Fircroft; Town of Florida (NY); On-site; USD 55,000 - 75,000; Full time

Job summary

NES Fircroft in the United States is seeking a manufacturing technician to perform inspections, coating prep, grit blasting, and equipment support in a fast-paced plant.

You will work with cranes and forklifts, maintain tooling, and ensure accurate documentation while following EHS guidelines and 5S practices to improve operations.

Qualifications

• High School Diploma or GED and on-the-job training.
• Must complete EHS training including hazardous waste management.
• Minimum 2+ years in manufacturing with relevant skills.

Responsibilities

• Visually inspect serial numbers and part condition for acceptance.
• Interpret inspection findings and follow procedures.
• Track tooling and consumable inventories.
• Perform masking, grit blasting, and coating prep per specs.
• Operate furnaces, cranes, and forklifts under supervision.
• Enter data and maintain quality documentation.
• Support 5S and waste handling per EHS rules.
• Provide setup support and maintain tooling quality.
• Assist with maintenance and calibration of equipment.

Skills

Manufacturing experience

Interpret drawings

Production/Maintenance

MS Office / SAP

Timekeeping apps

Education

High School Diploma or GED

Tools

SAP

MS Office

Job description

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Visually inspects serial numbers and part condition to verify if parts are acceptable.
• Interpret findings from inspection documentation activities and react according to established procedures.
• Tracks and manages tooling and consumable inventories.
• Performs liquid and tape masking on components using various tools and equipment according to WI/Drawings to maintain coating allowances.
• Performs manual and robotic pre-process grit blasting for thermal spray on components according to specification and interpret results.
• Utilize precision measuring equipment as required to check work and record in electronic database.
• In process inspection of own work and work of others before part movement to next operation.
• Operate controls on atmospheric and vacuum furnaces under direct supervision, load and unload own work.
• Knowledge of loading configurations and AMS2750 requirements for furnaces and locations of job aides.
• Assists operators in setting up their equipment and maintenance of tooling.
• Operate small cranes and fork-lifts to move equipment, parts and material.
• Data entry/confirmation of the required quality documentation.
• Reporting and monitoring of abnormal production time per production step.
• Carrying out scheduled and unscheduled maintenance on equipment and tools.
• Following Environmental Health and Safety regulations while working in fast paced environment.
• Continually improving operations and the working environment through 5s methodology.
• Performing waste handling in accordance with EHS procedures & legal requirements, such as:
• Segregating generated waste
• Placing hazardous and non-hazardous waste in appropriate containers
• Maintaining waste containers closed and in good condition
• Labeling waste containers with appropriate hazardous waste and non-hazardous waste labels
• Marking the start accumulation date to hazardous waste label once the container in the satellite accumulation area becomes full.
• Arranging internal waste transfer to central accumulation area
• Contain and clean up area incidental spills
• Independently carry out assigned technician work and independently correct non-conforming hardware during the reconditioning process where applicable.
• Minimal experience in thermal spray booth operations under direct supervision
• Training of all entry level technicians for coating prep, braze and heat treatment.
• Set-up and installation of brazing equipment according to process requirements
• Execution of brazing requirements on gas turbine components as per the required technical specification for joining and putty braze.
• Experience with grinding and blasting of components for braze preparation according to specification.
• Advise and / or participate in the design and fabrication of brazing tools and fixtures as required.
• Reporting of technical deviations to Cell Lead/Supervisor.
• Keeping the working environment and machines in a clean and proper condition
• Other duties as assigned.

MINIMUM REQUIREMENTS

Education & Training

• High School Diploma or GED equivalent.
• Complete Specific on-the-job training towards meeting essential duties and work area performance criteria.
• Must complete EHS assigned regulatory training for work area as described by PSM’s EHS Training Matrix, which includes:
  • Initial and annual Hazardous Waste Management training.

Skills/Experience

• 2+ years of experience manufacturing experience with specific skills in at least one of the following disciplines: grinding, blending coatings, coatings application, coatings removal (strip line), blasting, heat treat, machining or welding or similar skillset.
• 2+ years of experience with interpretation of technical drawings or work instructions
• 2+ years of experience in a production or maintenance environment
• Comprehensive knowledge of manufacturing processes
• Basic knowledge of MS Office programs, SAP, time keeping applications and folder structures.

Physical requirements

• Stooping/Crouching. Bending body downward and forward by bending spine at the waist.
• Kneeling. Bending legs at knee to come to a rest on knee or knees.
• Crawling. Moving about on hands and knees or hands and feet.
• Reaching. Extending hand(s) and arm(s) in any direction.
• Standing. Particularly for sustained periods of time
• Walking. Moving about on foot to accomplish tasks, particularly for long distances or moving from one work area to another.
• Pushing & Pulling
• Lifting up to 50 lbs. Raising objects from a lower to a higher position or moving objects horizontally from position-to-position.
• Grasping. Applying pressure to an object with the fingers and palm.
• Repetitive motion. Substantial movements (motions) of the wrists, hands, and/or fingers.
• The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes.
• The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.
• The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, exposure to high heat or exposure to chemicals.
• May require travel (air & ground) with short notice.
• Being able to wear required PPEs for specific tasks performed, such as respirators, Tyvek suit, gloves, face shield, etc.
• Ability to cooperate and work with peers

Equal Opportunity Employer Veterans/Disabled

With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining andManufacturingsectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.